Motorcycles - January 2007

2007-01-26 09:15:43 · 3 answers · asked by flavorlicious 2

crotch rockets? why is it that 8 out of 10 on here insist on trying to steer a complete rookie into gettin a high powered sportbike? are cruiser's too 'boring' in the twisty's? can any1 honestly say they would be able to handle a bike capable of going from 0-100+ in the quarter mile as their first bike?

2007-01-26 09:01:00 · 10 answers · asked by forktail_devil 5

2007-01-26 08:54:50 · 38 answers · asked by Anonymous

2007-01-26 08:53:09 · 10 answers · asked by flavorlicious 2

Also, what can I do ensure the bike I buy doesn't have 101 problems a week after buying?

2007-01-26 06:48:14 · 7 answers · asked by Anonymous

2007-01-26 05:48:37 · 17 answers · asked by donahuecallmephil 1

2007-01-26 05:31:09 · 20 answers · asked by Anonymous

I have tried unsuccsessfully to bleed the front single disc brake on a Suzuki 400 twin. I have replaced the caliper piston, seals etc. also the master cylinder piston, seals etc. with genuine Suzuki parts but am totally unable to get any brake fluid through , I think I've tried every trick in the book, unless you know differently! ( I hope !)

2007-01-26 05:18:40 · 14 answers · asked by mac adown 2

2007-01-26 05:09:23 · 6 answers · asked by Anonymous

2007-01-26 04:50:43 · 9 answers · asked by douglas r 1

2007-01-26 04:35:21 · 4 answers · asked by PATRICIA K 1

2007-01-26 04:24:03 · 8 answers · asked by lav s 1

As to me i have this bike for two years.never it gave me mileage under 60. All my friends wonder about the mileage. Do u all wonder like my friends?

2007-01-26 03:56:58 · 5 answers · asked by Anonymous

This only happens at lower RPMs when I accelerate. If you accelerate quickly no noise. Seems to run well other than this. It has been suggested that this is possible carbon build-up on piston. I don't think so as I have added fuel system cleaners and nothing has changed. I have tried to listen to the engine to figure out where the noise is coming from. No luck. The bike has 42,000 miles on it. Any thoughts or ideas about this problem would be appreicated.

2007-01-26 03:00:40 · 9 answers · asked by John W 1

2007-01-26 02:43:05 · 6 answers · asked by Anonymous

2007-01-26 01:15:19 · 22 answers · asked by darryl h 3

2007-01-26 00:51:27 · 3 answers · asked by bluemoondart 1

what would be the best and decently priced spark plugs for my cbr600rr 2004.and how often do i change it and whats the indication that i should .
And since in live in India the temperature never goes below 3degree or it never snows or freezes here.So do i need to put antifreeze along with my coolant.?
and whats the best security for my bike since i share a garage .
Thanks...

2007-01-26 00:25:48 · 3 answers · asked by rwanchu 1

I want to put in some type of flooring. What did you use and how well did it work?

2007-01-25 21:45:13 · 4 answers · asked by STK FLKR 2

2007-01-25 20:43:56 · 3 answers · asked by Anonymous

2007-01-25 19:04:17 · 4 answers · asked by ms n 1

2007-01-25 19:01:10 · 9 answers · asked by Anonymous

a notorious bike gang?

2007-01-25 17:23:43 · 5 answers · asked by Anonymous

thinking about geting one

2007-01-25 16:45:50 · 22 answers · asked by Anonymous

specially manufactured by Electrotherm (India) Ltd.,

2007-01-25 16:35:24 · 5 answers · asked by shantilal janva 1

I have tried for a long time now, I got the bike running good, Ninja 750R, 1989. But I can't hook the throttle cables up. The plastic housing does not fit on. With the engine kill switch and starter button. It has a front and back plastic side. I have tried literally everything, I got it to fit when not on the handle (just to see) but it will not fit when I put it on. What gives? I know I am using the correct procedure?

2007-01-25 16:28:39 · 3 answers · asked by SFAcoustic 1

i know a few things that causes the rotors to warp like, heat, improper torquing and material used on brake pads. But What else that might possible affect the rotor to warp?????

2007-01-25 15:58:23 · 12 answers · asked by Rey r 1

How do you reprogram a new remote? It's a Sabercat EXT 600 EFI

2007-01-25 15:31:07 · 3 answers · asked by Ryan E 2

yamaha bansse 1989

2007-01-25 14:16:38 · 3 answers · asked by eltettible 2

I just overhauled my motorcycle engine a few months back. It does not make funny noises initially but I just notice that the right side of the engine produces a lot of noise, the left side also produce noises but not as loud as the right side of the engine. Anyone here have any advice?

2007-01-25 13:17:23 · 5 answers · asked by Khairudin Bin Salim 4