Maintenance & Repairs - June 2006

Does anyone know if this item was discontinued? It is not on their website and not sold in stores and I LOVE IT!! Does anyone know anything about it?

2006-06-15 09:48:52 · 1 answers · asked by jd 1

2006-06-15 09:23:28 · 7 answers · asked by matthewhavard3 2

We have checked the ECU, distributor, alternator, nothing seems to be burned up... we bought the car already not running. The former owner said it just cut out while he was driving, and was never able to get it to start again. The engine turns over, but will never start. The timing belt and all belts seem to be okay and intact. The fuse that pops as soon as we start it is #14 under the dash, something with the alternator, cannot remember the exact name. Any advice would be helpful.

2006-06-15 09:19:31 · 2 answers · asked by Leigh 3

2006-06-15 09:16:00 · 4 answers · asked by Sarah 2

under 1,600 dollars

2006-06-15 08:50:42 · 1 answers · asked by tommy t 1

I am located in Isarel so it should include worldwide shipping.

2006-06-15 08:43:13 · 9 answers · asked by yuval f 1

the other day i went out to my truck(1994 chevy silverado with 350 tbi engine 5spd manual). after it had been sitting for a few hours and went to start it and it would not kick over. the battery is fine and all lights and other electronics work. But when i go to start it the starter wont kick over. I changed the starter, the starter relay, no loose grounds or plugs, checked fuses and everything is good. I took out the starter and bench tested it it works fine. I turned the engine with a breaker bar to see if for some wild reason it was seized up. no problems. Could it be my ignition switch? i am a little stumped at how after sitting for a few hours this happened. Any help would be greatly appreciated before i dive into my ignition.

2006-06-15 08:22:58 · 8 answers · asked by Anonymous

I'v been told by a friend not to drive a new car above 60 mph for the first 3000 miles, the reason is because the engine is not well lubricated yet. Is this true?

2006-06-15 08:19:22 · 12 answers · asked by weekspot74 2

I need help. I have a 2000 plymouth neon, 2.0 litre, 4-cylinder. I want to add performance, and bodykits to it. I am limited in money right now, but i am desperate to modify it. I already have some good looking euro style lights on it. Should I upgrade it, or wait and get a better car, in other words does a neon suck at racing.

2006-06-15 08:17:55 · 11 answers · asked by fernando j 2

2006-06-15 08:13:51 · 9 answers · asked by frankie11977 1

I have a 93 toyota corolla, and i know i have a fuse that keeps going due to a short, how do i troubble shoot for a short, i think i know how to fix it once i find it, but how do i even go about finding it?

The cars had a coupple of acidents, and its the rear lights and the front dash thats got the problem anyone have any sugestions?

2006-06-15 07:59:37 · 1 answers · asked by jinxintheworld 3

2006-06-15 07:47:59 · 10 answers · asked by samviola 1

2006-06-15 07:33:12 · 3 answers · asked by romeo l 1

alternator belts

2006-06-15 06:58:16 · 8 answers · asked by niah 1

'81 Toy Pickup. front drivers brake, vibrates with respect to vehicle speed when brakes applied. pulls to left badly also. replaced bearings, which fixed prob for a while, then gradually started happening again. then replaced bearings and rotor. problem stopped for a while, now gradually started happening again. need to go on road trip and concerned about safety. any ideas besides taking it into a shop?

2006-06-15 06:51:16 · 9 answers · asked by Anonymous

I have a 1995 Mercury Tracer front wheel drive, 1.9L. There is a grinding, almost metal-metal, noise that is coming from the front driver side brake unit when I go and press on the brake. The pads are okay (over 60%) but are squealing too. I was thinking the CV system but I have test it and it seems fine. What gives?

2006-06-15 06:28:03 · 8 answers · asked by vmgalvez 1

My cassette deck is running but it has no tape in it. Now I cannot listen to the radio . I cannot just pull the fuse on the tape deck because it runs the radio too even though they are separate units. I think somebody got a tape stuck in the deck and this problem occured when they dug it out. I've looked in there with a flashlight and there is nothing left in the deck that should cause it to run but it does. I need a way to disable the tape deck so I can listen to the radio. Any help would be appreciated . Thank you

2006-06-15 06:11:35 · 3 answers · asked by eightbraker 6

i drive a 2003 ford focus. the fan in the ventillation system arbitarily cuts out. if i leave it in the ON position for long enough after it gives out, it emmits this really acrid, foul odor. but if i turn it off and wait a bit, it turns right back on. it will work anywhere from a couple seconds to a couple hours. is this a known problem for this year/make/model? i'm hoping it's an easy fix. any suggestions to what could be causing this?

2006-06-15 06:09:27 · 4 answers · asked by t-rex 2

I own a 1988 Honda Accord (USED) just bought the other day and it has the appearance that it hasn't been driven in a while with the rust on the inside and such. I am just curious how to get my problem with the engine to stop. I installed a timing belt right before I put it on the road, so I need to know what the problem is. Also, how do I fix a short in the power windows & locks??

2006-06-15 06:07:00 · 8 answers · asked by Benjamin L 1

2006-06-15 05:25:36 · 11 answers · asked by Jay 1

2006-06-15 05:03:40 · 4 answers · asked by Anonymous

the pads are new and the rotors have been turned so what do i do now?

2006-06-15 04:50:39 · 17 answers · asked by big_steve 2

2006-06-15 04:33:24 · 6 answers · asked by scottfamilytribe 3

With the (up to) 10% ethynol in our gas I went from 16.5 to 15.5 mile per gallon. I average about 15.5 gallons per fill up. With this loss (only 1 mile per gallon) at $3.00 per gallon, I lose about $2.79 or 0.93 gallons per fill up. Looking at it another way I could say I am paying $3.18 per gallon.
So is this helping us or not?

2006-06-15 04:24:03 · 6 answers · asked by justaskn 4

The steering doesn't engage untill ten degrees either way. It doesn't have rack and pinion my thought is that idler arm is ba.... doesn't this seem to be the problem. What do you think.

2006-06-15 03:31:05 · 1 answers · asked by cude84 1

i got a 5-speed 4x4 dodge dakota, it also makes a metallc humming noise from the rear while driving. i was thinking universal joints? what do you guys think?

2006-06-15 03:26:34 · 5 answers · asked by john 3

2006-06-15 01:37:38 · 2 answers · asked by phantom phan 1

2006-06-15 01:31:24 · 3 answers · asked by midnightsnacker 1

2006-06-15 01:22:08 · 14 answers · asked by garrp0 1

2006-06-15 00:58:35 · 5 answers · asked by shaneen2004 2