Ford

I am wondering what a 1961 to 1972 Ford Truck would cost with no motor or transmission, light rust, and needing interior work?

2007-09-02 06:04:38 · 15 answers · asked by Tim G 1

2007-09-01 22:46:06 · 4 answers · asked by Anonymous

I don't want to take the whole headlight out. Is there something
that I am overlooking. I am unable to reach the bulb,

2007-09-01 18:07:09 · 5 answers · asked by Anonymous

2007-09-01 17:59:37 · 4 answers · asked by deidre 3

i went to start my van and saw soke and the neg cable had melted right off the battery post any ideas?

2007-09-01 15:06:35 · 5 answers · asked by luckynca 1

has anyone heard anything on ford bringing back the SHO on the new taurus's?

2007-09-01 13:43:16 · 4 answers · asked by CArl 2

2007-09-01 12:58:41 · 4 answers · asked by luckynca 1

I have a 2003 GT Mustang 327 Gears, 4 spd auto tranny, shift kit, stock injectors, stock suspension, 4.6 04 Lincoln motor stock, BBK shorty Headers, with modified Cats, and a Kenne Bell supercharger inner cooler cold air intake running at 9psi boost. My Dyno was 377 rwhp and 410 torque. Do I need to drive this car in Overdrive when not on the highway. Will it hurt my tranny to keep it out of overdrive around town? if I'm doing about 50 or 60 mph pkwy not in opverdrive will that kill my tranny? I love the sound it makes when its not in overdrive the flowmasters roar.

2007-09-01 05:52:03 · 4 answers · asked by xraythebarbarian 1

Replaced everything from the master cylinder back to the wheel cylinders.All fittings teflon taped and tight,no leaks showing anywhere.
I keep getting air in the lines and can't find where it's getting in,there is no visible leakage.
Anybody had this problem ???

2007-09-01 05:48:07 · 9 answers · asked by Anonymous

my driver seat is leaning back i had the recall fixed and it is still leaning back what can i do about this problem ?

2007-09-01 03:16:15 · 6 answers · asked by Ella B 1

Im looking for a bit louder pipes...But my dad said that glass packs would make my truck sound like S***???

2007-08-31 16:44:56 · 5 answers · asked by Anonymous

4.0 liter v6

2007-08-31 13:03:25 · 4 answers · asked by robert g 1

What do you like better CORVETTES or Mustangs? I LOVE Corvettes!! And i hate mustangs (sry Mustang fans)

2007-08-31 12:55:47 · 10 answers · asked by surfergirl889 1

1979 Ford F-150, 300 inline 6------- loud grinding noise when i disengage the clutch to shift down in lower gear? is this somthing in the transmission or the clutch that needs fixed?
(Manual transmission 4 speed)
thanks for your help...

2007-08-31 11:50:22 · 3 answers · asked by Anonymous

On a car like the 1964 Mustang (generator) and 1965 Mustang (alternator)?

2007-08-31 10:02:07 · 7 answers · asked by Anonymous

The remote and the button inside make the lock move a bit, but will not totally pop up. Both will make it lock rather easily tho. Also the key will not open that door lock either. I also can't figure out how to take of the paneling inside without breaking tabs. I see only two screws near the handle that don't appear to help me take it off.

2007-08-31 07:42:14 · 3 answers · asked by theexception2002 1

I see the sensor but what tells the ECU where the cam shaft is?

2007-08-31 07:30:27 · 4 answers · asked by gill73115 3

My truck just broke down and it starts up the reverse and neutral works but when i put it to Drive or 1 or 2 gears it dies and jerks roughly...what is this??? i had to leave it out in the middle of nowhere for now...how can i get it to work for a while to get it back home...please help....mechanics help me...

2007-08-30 14:52:52 · 7 answers · asked by Jamie B 2

Over the last year, my 1965 Mustang (automatic) has started fine, except about 4 times when it acts like it's not in park. I play with the gear shift, but I don't thing that does anything. After 6 or 7 tries, it suddenly starts. But it'll be fine for months, this happens once, and then it's fine for months before it happens again. Any idea what the problem is?
Thanks
goldenmissive@hotmail.com

2007-08-30 06:59:55 · 6 answers · asked by Avidreader 1

How many gallons of gas does a 2000 ford ranger hold?

2007-08-30 04:44:44 · 6 answers · asked by Diana P 1

When I shut down the car, the gps plugged into the cigarette lighter does not power off, even with the truck totally off. I assume this will drain the battery. Is there anyway to make the power source shut off when I shut the truck down? I really don't want to have to unplug the gps every time I shut the engine off.

Thanks

2007-08-30 04:17:37 · 10 answers · asked by oil_trdr 2

I have a 2000 Mercury Grand Marquis with the Ford 4R70W transmission with overdrive.. If Im driving at a constant 60 miles an hour on the highway what would happen if I turne overdrive off? If I'm gongi 90 miles an hour with overdrive off could i damage the tranny or the engine??

2007-08-29 19:01:04 · 11 answers · asked by JMSA540 2

Ok, I just bought a 190 mustang a couple months ago and I was looking into fixing the heater in it cause it gets pretty cold over here. Anyway, the car blows air but there are components missing from the AC and the heater. What Im trying to figure out are what these two metal hoses are that come through the fire wall into the engine compartment. They are on the passenger side and one is on top of the other. I think they are for the heater but Im not sure. Does anyone have any idea what these are for?

2007-08-29 18:38:04 · 4 answers · asked by Ed 1

So i have a 1995 ford taurus that i got 6 months back. Since then I have always been setting tire pressure to 5.0 on the gauge. Is this alright? Am i Overinflating or Underinflating? I know every car has a different rating, but I just waned to make sure I am not way below or above what it should be.

2007-08-29 17:32:45 · 14 answers · asked by vikram.desai 2

It's a 1998 Mark 4. The handbrake cable is adjusted up and is fully tight on the 5th notch. But the car won't hold on a hill. The normal footbrake operation is fine. I removed the rear hubs and could find nothing wrong. There is plenty of lining left. Help!

2007-08-29 09:44:50 · 5 answers · asked by Anonymous

how much is the actual part roughly? does it take long to put them in?

2007-08-28 23:53:01 · 6 answers · asked by kcampbellkc 3

2007-08-28 18:35:58 · 5 answers · asked by Car freak 4

I have a 1981 Ford Fairmont Futura. It has a Strait 6Cyl 3.3L 200CID 1-BBL engine in it. So far I have added a new Cherry Bomb muffler and custom exhaust from the Cat back. A K&N X-Flow Air cleaner assembly, New spark plug wires, Spark plugs, Fuel Filter, Oil filter, And a new crank case breather. I also plan to put a new 3000 CFM Electric fan and 1 or 2 hood scoops to try and cool the motor off some. I would like to know if there are a few more options for me to get more power out of it without getting too expensive. It has been quite a challenge so far for me to find parts for a '81 Futura. It came stock with 94 HP. But with my mods so far I think I am around 120-130 HP. Any help will be greatly appreciated. Thank you for your advice.

2007-08-28 16:21:12 · 8 answers · asked by Jonathan Harris 1

I have a 1966 ford mustang with a 289 V8 engine bored 30 over. I want to know what the cubic centimeters are now, and I want to know how I figure it out. Like an equation or formula.

2007-08-28 15:31:15 · 7 answers · asked by alexander73 1

2007-08-28 13:46:22 · 8 answers · asked by bubbabtheone2 1