Ford

2007-08-25 04:41:43 · 7 answers · asked by Anonymous

I bought a 1999 Ford Mustang a while back and the previous owner had put a knob on the shifter that has lights and stuff - not really my style. When I bought the car, it came with the original shifter knob in the glove box, but I cannot seem to figure out how to take the current one off and replace it with the original. I have pulled up on it, tried to twist it off, tried to push down and twist... Does anyone know how to do this? Thanks.

2007-08-25 04:33:13 · 6 answers · asked by Nathan M 1

2007-08-25 03:05:18 · 3 answers · asked by Anonymous

I've got a 4 x 4 F250 with full bumper replacement and add a left (spring) for the additional weight. Ever since last brakejob, the front end will bounce just a bit when brakes applied kinda like one of the tires is out of round...course it's not because otherwise it would do that all the time. Does this sound like a mis-aligned brake caliper? Worn disks? Warped rotor? It seems to happen when brakes first applied and if you let off then slowly reapply, the impact is diminished. Your thoughts PLEASE. Thanks.

2007-08-25 02:15:04 · 3 answers · asked by Kendall W 1

2007-08-25 01:08:15 · 2 answers · asked by Biker1 1

I would like to have a gallery of mustangs from start to finish can someone tell me a website for this?

2007-08-24 19:40:23 · 4 answers · asked by Slick Vic 3

was told it was a windsor but they were not sure being a larger truck i was thinking probably a modified

2007-08-24 18:59:13 · 5 answers · asked by alledgedflatlander 3

Anyone out there know how much a ignition switch would cost me for a 1996 ford aspire.Also will I need to go to a locksmith?If so how much am I looking at spending?Thanks in advance.

2007-08-24 17:38:23 · 3 answers · asked by Mr. LJAC 2

2007-08-24 11:38:32 · 6 answers · asked by Jessica 1

I"m looking at an A code 66 coupe..already body work down..pony interior..disc brakes..i yet to check the vin and door plate..but.having all of the neccessary there.new appearing to be..engine is missiong..car interior need assembling..pony wheels..and dash..door panels and seats are new, body is white..new gt gas cap..trumpet dual, chrome seem new online pic..need motor..$2500;.i would 4 wheel disc brakes..lower A frame on suspenions for improve handling..reqr and front sway bard thicken..I wondered about power window and lock..and seat..tilt steering and rack and pinion..could any of this..be out of thunderbird (wiring, fitting..motors..since these 80/90's are darn cheap. yet..expert about the fuse box installation..from there..jsut plug them all in. seats are really easy..the power windo and lock..have to think on location..of switch..just thinking outloud. like them custom cars tv shows..when they do 500HP motors..I'm content with 300plus..i like MPG..cruixing around. thank 4 help

2007-08-24 10:43:24 · 6 answers · asked by blessedrobert-cuz-it is written 2

I have 1990 ford ranger 4.0 2 wheel drive I hooked the battery up backwards now my truck will not start it will turn over but gets no fire something went out please help

2007-08-24 09:22:10 · 6 answers · asked by buckiejr2001 1

i want to find after market parts to dress up my 95 mustang also parts for engine

2007-08-24 06:51:58 · 2 answers · asked by todd s 1

A dealership in the area has a 2006 Mustang GT convertible that was never sold. It's yellow with black leather interior (inc. interior upgrade package) and is automatic. I was going to offer $24000-$25000, but $27000 is already significantly below the KBB value. I'm a little put off by the yellow since that seems like a girly color, but I was thinking of getting black Bullitts to make it more aggressive. Any thoughts?

2007-08-24 04:11:12 · 12 answers · asked by Dub 2

Alright, so my dad and I wanna restore a '67 mustang coupe together and we found this one near us that is basically just a rusty shell. There is only cancer on one quarter panel and the rest is just body rust. The floor panel also needs to be replaced. Once all that is done (with some good sand blasting) I'll have basically just a '67 body in pretty good condition. Here is the link to pics...

http://seattle.craigslist.org/est/car/402105630.html

.... He said he wants 1,000 or best offer, but I'm not sure if thats a good deal or not. Please help or tell me what '67 body like this is worth! I would have about $2,500 to put into it for the moment... and yes I know I'm gonna need a lot more money and this is gonna take awhile to restore. Thanks for the help :)

2007-08-23 23:33:34 · 4 answers · asked by Anonymous

How much would you say a 1966 mustang convertible, all original, with a straight six. the whole car is in mint condition is worth only 90,000 miles?

2007-08-23 21:47:27 · 3 answers · asked by Anonymous

2007-08-23 13:41:05 · 18 answers · asked by nodumgys 7

2007-08-23 11:43:01 · 5 answers · asked by dasdmk 1

Called i think the A plan

2007-08-22 14:23:29 · 3 answers · asked by Anonymous

im gettting my license soon and my dad says he wil spend up to $5000 on a car. i really want a 60s mustang. with less than 120k miles. any help?

2007-08-22 11:32:31 · 10 answers · asked by fletch627 2

2007-08-22 05:08:54 · 20 answers · asked by Lady M 6

can someone tell me the difference between the two models? engine wise/body style? first time buyer tryin to pick...

2007-08-21 23:46:43 · 7 answers · asked by jen 1

2007-08-21 23:05:40 · 6 answers · asked by stephen f 1

1975 F-350 1 ton dullie Wrecker with the 360 cid 2bbl carb 4 speed tranny ~ We are restoring as a hobbie project ~ Motor's locked up, wanting to swop out motors ~ so, does anybody know what will be a common motor, that will bolt up to the mounts, and the bell with little, or preferably NO messing arround??? We where thinking a 351, but we dont know if it would be a cleavland, windsor, or modified ~ Also thinking about a 400 cid, or a 460 cid ~ Any thoughts???

2007-08-21 16:19:16 · 4 answers · asked by Tony Z 2

I have 2003 GT Mustang Kenne Bell Supercharer 4.6 4 spd automatic. At 50 mph roll in Overdrive should I take it out of overdrive to race at that speed?

2007-08-21 14:37:42 · 6 answers · asked by xraythebarbarian 1

i would like to know why the governors on cars are different. I am always hereing how people use chips to reprogram the govornor. Ex the mustang gt500 top speed is 155mph, but 500hp can go waqsy faster than that. Like the 2000 cobra R top speed was 175. y 7 years later its so much slower?

2007-08-21 12:10:31 · 15 answers · asked by Jcool 4

Last Monday night someone ran into my grandma's car, smashed it into her new car and drove through her garage. They left the scene. The neighbors report seeing a damaged SUV leaving the scene shortly after hearing the crash but could not tell the type due to a high rate of speed. They left part of their car behind though, the left front wheel well liner. I have found the same type of liner on a Ford F150 V8 Triton... this is a truck, not an SUV though and the distance between the wheels is too far apart. The vehicle that hit is an SUV, has the same wheel well liner as an F150 (it is a large Ford vehicle, an early 21st century model, newer wheel well liners are different.) the distance between the outside of the tires is 75 inches. Can anyone tell me what vehicle did this? I would really appreciate the help since they caused many thousands of dollars worth of damage, Thanks.

2007-08-21 07:59:31 · 8 answers · asked by Colter B 5

Finally, we are going to begin looking at SUV's. I told my husband my top 4 cars: Ford Escape Hybrid, Mercury Mariner Hybrid, Suburu Tribeca, and Saturn Outlook. Also of course in the running - Toyota RAV4/Highlander (reg and hybrid), Ford Taurus X/Freestyle, and others. So my question - after reviewing all the reviews for regular Ford Escape vs Escape Hybrid - any negatives to getting the Hybrid? (Hopefully Ethol sees this and she has really helped in the past...but others too!)

2007-08-21 06:44:51 · 11 answers · asked by aloha_mu 3

- original engines
- no nos

2007-08-20 21:10:58 · 11 answers · asked by tankaboy91 1

i was thinking about 1969 or 1967. what classic year would u get? around how much do u think it would be? and what color should i get/paint it?

2007-08-20 17:12:56 · 15 answers · asked by Anonymous

as you all know the hemi was dominating the nascar cicuit in the mid 60's Ford produced the 427 SOHC wich produced more hp and more torque than the 426 hemi. At first nascar said they could use it. But then said no. Ford did porduce enough of these engines to have it homoglated. Do think it is possible that mopar saw the threat here (on the race track and in the show room) and possibly "persuaded" nascar to change their minds on letting ford run this engine?

2007-08-20 14:27:09 · 8 answers · asked by turkey 6