Add-ons - January 2007

2007-01-17 05:57:01 · 1 answers · asked by superstes88 3

I installed this card in my w3507-emachine,loaded 3times the driver the comp. stugghles to run i hear the hard driver running loader ?

2007-01-17 05:36:51 · 1 answers · asked by Anonymous

I am trying not to buy a new video card because the one i have is adequate, but it does not have any video out option. What can i do?

2007-01-17 04:51:44 · 4 answers · asked by chris13429 1

Ok i did the svideo input for my video now i need to know how to get the sound to my tv any thoughts

(my tv doesnt have an optical input btw)

2007-01-17 04:31:00 · 2 answers · asked by taracint 1

2007-01-17 04:12:21 · 2 answers · asked by Lolly 3

also how can i put icons for easy access on the corner of the start bar where the time volume and othere stuff are

2007-01-17 02:28:45 · 6 answers · asked by Matt 1

2007-01-17 02:18:56 · 7 answers · asked by rhiju_talukdar 1

2007-01-17 00:35:54 · 2 answers · asked by Mr Asker Knowmore 2

ive been looking around on the internet for a agp 8x video card. ive seen two different interfaces. where one has 3 diferent gold parts and the other has 2 gold parts. will any of these work on my brown agp slot.

2007-01-16 23:24:18 · 3 answers · asked by hyperlite105 2

2007-01-16 20:38:55 · 7 answers · asked by Steph_G 1

Which one can do it all? Like read and write/burn CDs and DVDs?Because I don't understand these: DVD RW +- dual layer, DVD ROM, CD ROM?? And there are numbers too like: 16xDVD RW and LG 52x32x52 CD-RW??? What are those???Thank you very much.

2007-01-16 19:16:27 · 4 answers · asked by Anonymous

USB Flash Drive is write protected - How do I remove it?
While transferring files from my PC to my USB Flash Drive. I received an error message - The Disk can not be written because it is write protected. Please remove the write protection from the volume in drive \Device|Harddisk1\DR5.

How do I do this?

Thanks.

2007-01-16 19:11:22 · 5 answers · asked by meti 1

my computer won't recognise my headset when i plug it into my front port on my pc.
i have used it before and it is hooked up to my motherboard
can you help?
mobo: brand gigabyte

2007-01-16 18:32:18 · 3 answers · asked by me 4

i have a 3G modem that won't work with MCE, but works on XP SP2. But the drivers my laptop need are the ones MCE comes with. ie i bought my laptop with MCE pre-installed

2007-01-16 16:37:22 · 5 answers · asked by polkirkie 2

(I've actually asked this question already, but didn't receive a decent answer)

At home, in order to transfer files from my iPod (like my calender and such) and my camera, I simply plug them into the USB port and either a Windows Explorer folder or a wizard will pop up to help me move them. (You can also see them in the "My Computer" folder)

On my work computer, when I do this, an icon pops up in the tray that says "Safely Remove Hardware" I have changed it's notification status to "Always Hide," but it pops up anyway.

Also, the devices don't show up in the "My Computer" folder. And under the Device Manager, if I click on USB --> Mass Storage, I get a properties window - the same window I get if I double click on the "Safely Remove Hardware" icon in the tray.

I just want to copy the pictures from my camera! I had a different computer from the same company and didn't have this problem.


Can you please help me figure out how to put my pics on my computer? THANKS!

2007-01-16 14:21:44 · 3 answers · asked by Tiff 5

2007-01-16 14:11:22 · 7 answers · asked by AL IS ON VACATION AND HAS NO PIC 5

we all know that R, we can only burn once, RW, we can erase the thing we burned on a CD, and burn other thing again on the same CD. But, what is the difference between the "+" sign, and "-" sign? I went to staples.com before and tried to buy some DVD RW disk, then i saw for DVD RW, there are two parts, DVD+RW and DVD-RW, if these are same, why have to seperate, so i think there are something different. Oh, the same thing goes to CD ( CD-R, CD+R), so same thing as DVD? Thanks!

2007-01-16 14:08:59 · 7 answers · asked by ElViN@CY 3

I am trying to burn a dvd. I Used Dvd Shrink and it worked perfect,But now im trying to burn it using Dvd Decrypter and it wont do it! Its sais at the bottom left "Device Not Ready (Medium Not PResent)".I dont know what to do! Here is the log too.....:

I 21:32:24 DVD Decrypter Version 3.5.4.0 started!
I 21:32:24 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
W 21:32:24 Drive D:\ (FAT32) does not support single files > 4 GB
I 21:32:24 Initialising SPTI...
I 21:32:24 Searching for SCSI / ATAPI devices...
I 21:32:24 Found 1 DVD-ROM/CD-RW!



The dvds are Brand new,Not scratched.Any ideas on what could be wrong?Thanks so much!

2007-01-16 13:50:22 · 7 answers · asked by lucky_libra1089 1

2007-01-16 13:28:34 · 5 answers · asked by Anonymous

What's better the GeForce 7900 or ATI X1650. Remember to take into account ATI's Crossfire and Nvidia's SLI.

I know this is one step behind the leaders of the pack but that is the sweet spot in the graphics card market.

By the way no dumb *** answers like by a PS3 or Xbox.

2007-01-16 13:25:57 · 4 answers · asked by Anonymous

For Windows?

2007-01-16 13:25:11 · 3 answers · asked by Anonymous

2007-01-16 12:23:36 · 3 answers · asked by Anonymous

I got a Zen from my dad and he had already added a few songs to it. Ive installed and uninstalled everything a million times and it keeps saying my device is not plugged in.Ive tried everything and cannot add any songs to it.Any suggestions??

2007-01-16 12:21:34 · 4 answers · asked by ashley s 2

Hello,

I am currently looking into installing more RAM on my system. When I looked under system properties, I saw that there were two numbers for GHz. My question is what do these numbers mean?


Pentium 4 1.80 GHz
1.79 GHz, 384mg of RAM

I know what the initals stand for, i.e., GHz=gigahertz

384??? Is this all the memory I have?

I need to upgrade, but I want to be sure I don't waste my time buying something that won't be much of an improvement.

Thanks!

2007-01-16 11:31:28 · 10 answers · asked by ohangeluv 2

I have a dell pc that came with a ps2 keyboard, today I bought a usb one and I thought that just by restarting the computer it would work, but it didn't; so, I was wondering if someone out there has the knowledge of how to set up the bios to recognize the new one. Thanks.
Robert

2007-01-16 11:18:44 · 5 answers · asked by Robert M 1

2007-01-16 10:25:58 · 2 answers · asked by naco 1

Ok, does anyone know how i can find out the company of my graphics card, i was told it was buildt into my computer....i think its ATI. How do i update my graphics card? please explain using details. Im stupid when it comes to computers. Thank you :)

2007-01-16 10:21:16 · 4 answers · asked by :)e 2

and if a got a graphic card is it easy to install them? or do i need them tohave installed let say where i bought the graphic card.

2007-01-16 10:18:31 · 4 answers · asked by Geoff G 2

2007-01-16 10:07:12 · 1 answers · asked by Anonymous

2007-01-16 09:53:00 · 4 answers · asked by Anonymous