Motorcycles - August 2006

I am wanting to use dual sport tubeless 90/10 tires on my dual sport motorcycle and have to use tubes because it has spoked unsealed wheels. Anybody have EXPERIENCE with this type of set up?

2006-08-06 04:20:19 · 4 answers · asked by Schmeet 2

When changing from first to second,do you click up twice or just once,I have never riden a bike before and just want to know more about the theory of it.I'm 85y and dont think i will be learning in practice :)..I read about neutral being between 1st and 2nd and wondered if you just clicked right into 2nd..also do you hold the clutch in as driving a car or do you press it twice ..I understand the other gears 2-5 or 2-6 is normal but was always curious about 1-2 with the neutral in the middle...would really like a good answer on this as I will never be able to do this myself..thank you.

2006-08-06 03:19:37 · 7 answers · asked by thatgrl 1

To start riding. I'm 27 and have only little experiance on riding bikes. Im considering a Rebel 250 that a freind has. But what do you think. I dont want a moped. But just a simple cruiser. THANKS for your help.

2006-08-06 02:48:41 · 15 answers · asked by Anonymous

2006-08-06 02:25:04 · 5 answers · asked by overkill1976 1

Not able to get the battery from local agents. I also need containter for enticer model

2006-08-06 02:21:36 · 2 answers · asked by vgktvkoil 1

2006-08-06 02:19:06 · 6 answers · asked by Greg 1

2006-08-06 01:49:50 · 5 answers · asked by GLENN K 1

Left my bike for about 4 hours with the engine off but the key in the on position so my lights stayed on. now i dont have any electrical power.

2006-08-05 21:58:54 · 6 answers · asked by mcbdoc2000 1

I want about a 100. It can be used or new.

2006-08-05 17:57:11 · 11 answers · asked by BK Randy 3

Someone told me my Power Band was stretched. How much does one cost? Does Gates make one ?

2006-08-05 17:50:02 · 8 answers · asked by Anonymous

From best condition to basket case.

2006-08-05 17:31:02 · 9 answers · asked by cherokee96090 1

2006-08-05 16:40:43 · 5 answers · asked by Anonymous

2006-08-05 16:00:30 · 15 answers · asked by inked girl 4

it keeps overflowing. removed the bowl and manualy actuated it up and down and then the fuel will stop flowing. is there an online schematic on its assembly? also, the float is not leaking.

2006-08-05 15:16:49 · 3 answers · asked by teddybar67 4

How do i do it? it looks like i need a trick screwdriver? what do i do?

2006-08-05 14:46:14 · 1 answers · asked by theshmo891 2

Yes, I've checked ebay and many other obvious places.

Where else can I look?

2006-08-05 11:17:14 · 2 answers · asked by feejay 1

How old do you have to be to own and operate a Motorcycle in the state of Florida?? What are the requirments and does it matter of which type of Bike you get??

2006-08-05 10:59:18 · 1 answers · asked by fabiofilzi 2

i removed all the lower casing bolts and all covers . there are no more faseners to remove and the back half seperats but not the front under the piston section

2006-08-05 10:49:08 · 1 answers · asked by Anonymous

I need the exact time for a 2001 Kawasaki ZZR 1100 motorcycle. Any links would also help.

2006-08-05 10:13:35 · 1 answers · asked by Alex12342011 2

2006-08-05 09:27:57 · 17 answers · asked by miss b 1

2006-08-05 09:16:26 · 15 answers · asked by I-C-U 5

And did you see Travis's Double?!?! How sick is that?!?!

2006-08-05 09:13:31 · 6 answers · asked by eighty dee 3

i had a new cylinder bore of 50 over, i installed new rings new head gasket, bottom cylinder seal, torqued everything according to specs, i cleaned carb. put new gas in. new oil in the injection system, i checked and i have good spark , but it still wont fire, any help would be greatly appreciated.

2006-08-05 06:42:08 · 10 answers · asked by jomarle55 1

doing a report on carburators and need a comparisons for cv and slide on the fuel ecomony, emissions and throttle response.

I have found some info on the www but mostly adds for businesses.

Thanks for your time

2006-08-05 06:39:26 · 5 answers · asked by Anonymous

where all can you go and do on a moped

i know you dont need license...can you ride on roads that go up to 60 for the speed limit

2006-08-05 06:24:58 · 13 answers · asked by shroomman21 2

2006-08-05 06:20:33 · 3 answers · asked by KUNAL 1

looking for what way the drive gear spacer key goes onto the transmission spline

2006-08-05 06:12:22 · 1 answers · asked by motocrosser68112001 1

Belived to have existed in the 1960's

2006-08-05 05:59:52 · 14 answers · asked by Anonymous

I live near a road junction. Can anyone tell me why lads on mopeds rev the engine constantly whilst waiting for the lights to change?

2006-08-05 05:31:15 · 9 answers · asked by Mr Woo Woo 1

start the bike in gear it wants to move a little but it dont take off till you let it out and the clutch lever is almost all the way out

2006-08-05 04:41:59 · 3 answers · asked by 142069markmosley@sbcglobal.net 1