Maintenance & Repairs - August 2007

clean my rims

2007-08-18 09:59:30 · 3 answers · asked by Louis S 1

I have a 94 continental and i pressed the shock deflate switch in the trunk. the air ride compressor had been removed before i bought the car. My question is can i inflate the shocks without the compressor? and how.
only the front shocks have been deflated.

2007-08-18 09:58:53 · 2 answers · asked by Anonymous

I was driving down the road today and noticed that my blinkers weren't flashing, but staying still. All the bulbs work, and the lever is fine, which leaves the turn signal relay and the signal switch in the steering column, how can I tell which one it is? Does anyone know where it is on this vehicle?
1994 mercedes E420

thanks a lot guys!

2007-08-18 09:46:21 · 2 answers · asked by Nate 6

Hi there all, genuine answers only please, my car keep pulling 2 either side of the road every time it hits a bump or great in the road, anyone know y this is or how 2 fix it?
I have 2 small children and dont want 2 drive with them in the car til i sort it out!

2007-08-18 09:45:58 · 4 answers · asked by justagirl 2

I was driving with my mom in the car. A red sports car suddenly speeds up and gets in front of me, and they were completely in front of me. they were about to swipe the front of my car. I couldn't break because of the traffic, the car behind me was tailgating me. So i accidentally hit the curb.

Long story short. I have a little punctured hole on the side. Can it be fixed? I'm praying it can be becuase i just got this car.

2007-08-18 09:45:09 · 5 answers · asked by trish 2

What do you do if your car has been scratched with car keys? It hasn't happened to me but if it does, I have no idea what to do. You don't change all the scratched parts do you? You just take it to the shop right? If so, how do they fix it there?

2007-08-18 09:38:05 · 8 answers · asked by Dido 4

are there any popular auto repair franchises that over auto repair financing? name them. rather than getting a different car, i want to fix everything on my wold car at one time to restore it.

can anyone help me?

2007-08-18 09:36:29 · 2 answers · asked by p 1

98 Ford Exploder V-6, after replacing a very dead battery (bad cells+8 yrs old) checking the alternator showed at 2000rpm only 65 peak amps on the meter. Can the alternator fade or do they just go out completely? or is this still a good charging amperage? the Exploder sits for 2 weeks at a time and then driven for 3-4 days then sits for 2 weeks again, should I get a new alternator or try one of those solar trickle chargers?

2007-08-18 09:31:18 · 8 answers · asked by Gordon B 1

recently my family and i bought a new Ford F-150 Lariat and about 2 months after we purchased the vehicle when i turned it on the radio/stereo did not turn on in the manual we found nothing of it and the screen on the stereo didnt even turn on can u help me?

2007-08-18 09:26:14 · 2 answers · asked by Eddie 1

windscreen wipers that are in perfect condition still
leaves blurry film on windscreen. It is not the washer
fluid so anyone have any solutions. Tried cleaning glass
and wipers......

2007-08-18 09:18:21 · 6 answers · asked by vision of darkness 2

i have a 2000 dodge ram 1500. 2 days ago the air was ice cold and now its warm. the clutch keeps kicking on and off about every 5 second. i put a pressure gauge on and there is still freon in the system. but when the clutch engages the pressure drops down to about 20, then when the clutch disenagages the pressure goes up to about 45. what could be wrong or how can i get the air to blow cold again?

2007-08-18 09:06:44 · 5 answers · asked by Anonymous

It was a stock ecotec 2.4L now after the rebuild cracking about 330 hp to 340 hp was use 5w-30 I think . Its first oil change after the rebuild I found slug a buddy told me to try castro syntech 5W-50 does that sound right?

2007-08-18 09:00:28 · 4 answers · asked by Robert H 1

we have been having problems with the way our 90 accord ex has been running.my husband has been trying to find out what is wrong and we think it is a part he found.the problem is,is that we dont know what this is.it was attached to the fuel injector,its a small part only a couple of inches long...

http://i116.photobucket.com/albums/o39/mascitelli/mysterypart2.jpg

http://i116.photobucket.com/albums/o39/mascitelli/mysterypart1.jpg

2007-08-18 08:40:34 · 4 answers · asked by allaboutnaturelandscaping 1

There used to be a small "c" type clip on my Craftsman imapct gun and now it fell off and i cant find it.Now my sockets fall off everytime i try to use it. Is there anyhting i can do to keep my sockets on the gun without the small clip.Anyway to "rig" it. I doubt any parts store will have this clip if i ask for it.Thanks.

2007-08-18 08:26:37 · 4 answers · asked by lift&shift 101 3

Im trying to put the new links on. The top nut is tight enough, but the bottom is giving some problems. I can only get the bottom nut finger tight. When I try to tighten it further, the bolt spins along with the nut, so I cannot get it tighter. Does anyone have any suggestions or tricks to tightening this?

2007-08-18 08:17:18 · 3 answers · asked by michelle a 4

2007-08-18 08:06:48 · 7 answers · asked by Anonymous

The car is a 92 hyundai, there is a crack in the radiator and we have an estimate or two to install a new radiator and thermostat, but think the estimate is rather high at 672$.

2007-08-18 08:00:01 · 5 answers · asked by shadetree 1

What are some cheap gas stations to fill up a 36 gallon tank?

2007-08-18 07:36:02 · 1 answers · asked by Anonymous

2007-08-18 07:24:09 · 3 answers · asked by Ron B 1

The fan and everything came on and cooled the inside of the car could too much freon been put in to make it blow out like it did

2007-08-18 07:06:14 · 4 answers · asked by Anonymous

2007-08-18 06:59:37 · 10 answers · asked by john b 1

Its a complete housing with a thermostat in.
with 3 mounting holes , 1 slightly offset..
the hose comes off at a angle,, the only other things on it I can see are brevettato 9.10.125.00

2007-08-18 06:53:05 · 1 answers · asked by shineyhead_steve 1

a brake pad on the front drivers side wheel of a Rover 115 (metro)? I`ve never done it before and have pretty much no previous experience of doing this kind of ting. Any information would be great thanks.

2007-08-18 06:49:04 · 7 answers · asked by jonnybeanos 2

detailed instructions if possible would be nice

2007-08-18 06:34:10 · 7 answers · asked by FunFairy25 1

i have a 1995 toyota tocoma and i need to change the catalitic converter but i don't know what it does or where it is to change it

2007-08-18 06:33:39 · 2 answers · asked by john b 1

smoke was coming out of my rear differential and a kit is 85.00 any tricks to this?

2007-08-18 06:17:12 · 3 answers · asked by derrickshehan 1

how much is it gonna cost for me to fix it, and where do i need to take my car to get it fixed

2007-08-18 06:16:03 · 3 answers · asked by amith y 2

2007-08-18 05:56:19 · 5 answers · asked by Anonymous

I've just bought a Clarke brake flaring kit from machine mart however you don't get any instructions. Does anybody have an idea what to do?

2007-08-18 05:33:20 · 6 answers · asked by baldyjeff 2

i don't know what is a car's home coming system so if you know please help!!!!!!

2007-08-18 05:23:01 · 4 answers · asked by ♥Tingting♥ 2