Maintenance & Repairs - November 2006

One of my headlights went out, how do I fix it?

I drive a dodge dakota

2006-11-11 05:24:08 · 10 answers · asked by Anonymous

Anti-roll bar stops the end that sits in the chassis mount from sitting straight, it sits slightly at an angle so it's impossible to get the bolt through, got it in on the other side with brute force but is there any easier way?

2006-11-11 05:19:38 · 1 answers · asked by Anonymous

2006-11-11 05:15:25 · 12 answers · asked by STORMY K 3

there are 2 lights that suddenly turned on yesterday on my camry, one is check and other is trac off. What do they mean do I need to

2006-11-11 05:07:26 · 2 answers · asked by mpspaj 1

2006-11-11 05:07:13 · 3 answers · asked by bryan s 1

2006-11-11 05:03:05 · 19 answers · asked by funkygreyhound 1

i was told that if you yse it you need used oil and have to mix it with a solvent after filtering it,but he uses new oil bought in bulk puts £5 worth of diesel into his car and then tops it up with the new oil. he says he has been doing it for 3yrs and never had a problem,but is this method ok to do. i was also led to believe that you had to pay the chancellor £xxx amount of money for the tax (as your using free used oil) but he says as he is paying for the oil (a lot cheaper than diesel he says) he doesnt have to pay anything to the goverment. is he true on both accounts or has he been missled????

2006-11-11 04:52:40 · 14 answers · asked by Anonymous

2006-11-11 04:47:56 · 2 answers · asked by gottadance 2

i have a peugeot 306, it has had loads of problems with it anyway. but aparently the catallic converter is on its way out soon, i know this is something to do with emmission outlet but what actually is it and if it is next to break what will it cost to replace??

2006-11-11 04:46:04 · 9 answers · asked by Slug 7

2006-11-11 04:40:37 · 2 answers · asked by MELANIE W 1

First of all how much would it cost for me to do it myself or how much would it cost to have it profesional done. My secound question is how do i find my thermostat and how do i take it off? I have heard that it is easy to do but I dont know where to start. If someone could tell me how to take it off and put a new one in that would be great. How long will this take to do. I have off tomorow so i will do it then. PLEASE HELP

THANK YOU for all your help everyone I really appreciate it!!!!

2006-11-11 04:28:46 · 6 answers · asked by freakyhazerd 1

my dad, whom was operating the vehicle, was driving along a two way block and then we noticed a car started to accelerate rather quickly burning out their tires and then veered onto oncoming traffic the last second. My dad slammed the brakes, basically came to a complete stop, but the other car collided head on with our 2005 nissan altima at appoximately 45 miles per hour. the air bags did not deploy and there wasn't any serious injuries. my dad might have injured his hand with the impact to the steering wheel but its probably just bruised up. as for servicing the vehicle, it was always serviced at a nissan dealership so that basically rules out any tampering with the airbag or its sensor. Although possibly, i would assume its highly unlikely. As for damage to the car, it isn't totaled but the front is smashed up pretty bad and i would assume that with an impact of around 45 miles per hour, the airbags should have deployed since the collision was head on

2006-11-11 04:03:01 · 16 answers · asked by Ballin 1

Hi,

I own a maruti zen. Its a 2002 model. The airconditioning system in the car is performing very poor. It doesn't have any cooling effect. Can anyone give some suggestions to improve that? I am in Chennai.

2006-11-11 03:58:02 · 8 answers · asked by wacky 1

When we try to start the car, it makes a clicking sound. The lights and everything work fine, so the battery is in good shape. I just need to know how to install the starter...and by the way, it couldn't be anything else, could it?

2006-11-11 03:50:43 · 2 answers · asked by maylandchastity 2

Hi,

I own a maruti zen. Its a 2002 model. The airconditioning system in the car is performing very poor. It doesn't have any cooling effect. Can anyone give some suggestions to improve that? I am in Chennai.

2006-11-11 03:44:46 · 4 answers · asked by wacky 1

1989 Geo Spectrum. The clutch went out and i am going to replace it but is it really necessary to resurface the flywheel? Its nothing fancy, its just a beater car.

2006-11-11 03:32:36 · 10 answers · asked by cob32187 2

for a 1997 Chevrolet Silverado

2006-11-11 03:27:48 · 10 answers · asked by Cynthia S 2

We are trying to get this damn bolt off. It started off as an 11/16th bolt. But we slowly stripped it attempting to get it off. The flywheel has broken and left a middle ring with the bolts. We got 5 of the 6 bolts off and cannot get the last one. Are there any ideas in getting a stripped bolt off from a tight area? There is probably 1 1/2 in of space to work!

2006-11-11 02:59:57 · 5 answers · asked by Dan M 2

I have a 72 chevy Nova and I am needing to replace the front shocks because they are totally shot. The shocks run in-between the front coil spring. What is the best/safest way to change them out myself? I can't really afford to take it to a auto repair shop. Thanks in advance.....

2006-11-11 02:49:48 · 5 answers · asked by guitardan 5

14 inches of snow and my plow will raise up an inch at a time.Fluid level is ok..Pump runs but it acts like there is no fluid.

2006-11-11 02:37:15 · 3 answers · asked by danp 3

Have a 95 passport 3.2 v6 ! just put a used engine in it filled it up with water and it is leaking out the back of the motor some were ! looked at the old motor and there are no freeze plugs any were ! what could be leaking does anybody know anything about these motors were it could be leaking from ?

2006-11-11 02:26:32 · 5 answers · asked by rick c 1

i tried starting it and on the info screen it said wait 3 min then start that procedure didnt work

2006-11-11 02:19:38 · 3 answers · asked by blusprspo 1

2006-11-11 02:10:55 · 11 answers · asked by Fred C. Dobbs 4

2006-11-11 01:57:05 · 4 answers · asked by Chris Y 1

I was looking at a car to buy. The owner say that the passenger window is off track and need to be reset. Is it expensive to fix something like that?

2006-11-11 01:48:24 · 4 answers · asked by Anonymous

ive serviced it myself,but does it need to be sent to a garage to reset the counter?thank you

2006-11-11 01:23:37 · 7 answers · asked by RICHARD B 1

I want to repair them for local shops and I need all necessary tools and equipments

2006-11-11 00:50:12 · 3 answers · asked by David K 1

2006-11-11 00:46:05 · 9 answers · asked by T C 3

2006-11-11 00:42:35 · 3 answers · asked by dukefan1215 1

2006-11-11 00:22:55 · 2 answers · asked by juan rosa 1