Ford

i just got a chip the kind that you can buy on ebay it has two wires i found a conector near the throthle body that has three wires i want to know in wich two would this should be conected thanks

2007-04-23 08:24:15 · 5 answers · asked by blasito1973 2

I wanna get a body kit for my mustang, it's a 1996. i want a body kit that'll do justice for my V-8 engine! Anybody have suggestions for what kind i should get?

2007-04-23 07:47:48 · 9 answers · asked by word4word 2

Ok I looked at the answers and questions on here so is mine. We have had our 2006 in SIX times and still no answers. Its funny we thought we were the only ones out there with this problem and here we are seeing we arent. We even drove a 2007 and it had the samething just as bad as ours. We even have Ford in on it but they tell the us the samething. We just got it back last wed and had to take it back so does anyone have any ideas for me and my husband? Its bad at 60 to 75. We have tired the tires. We have the best tires on it right now. Thanks to Ford. But still the vabration is still there.

2007-04-23 04:10:15 · 12 answers · asked by Amie M 3

2007-04-22 21:57:23 · 3 answers · asked by Anonymous

I have a ford taurus. I was wondering if there was a way for me to reset it for my car. If there was a special "button press" for me too use. A certain way for me to program it for my car? I know that I can take it to a dealer. But I dont really like the fact that I have to spend $75 dollars just to get it reset to my car. Is there a number that I can press. My keyless entry has three buttons. Lock, unlock, and panic.
Responses would be GREAT. My mother has the other additional keyless entry but thats not the best help for me. HELP ME PLEASE.....

2007-04-22 19:18:20 · 7 answers · asked by Katie 1

2007-04-22 17:51:27 · 5 answers · asked by buck 1

I have a 2007 Ford Lariat supercab F150 6.5ft bed and am looking for a cheap drop in bedliner. I have searched the internet and have yet to find one. I live in the Tampa Fl. area so if you know of any internet sites or places near Tampa where I can go to have one installed cheap please let me know. Thanks.

2007-04-22 13:22:36 · 2 answers · asked by Anonymous

I've owned my Focus for 2 months now, and I've put about 1000 miles on it. By now, I would think that the engine has been broken in so I should be seeing the advertised mileage 27 (city) to 37 (highway) depending on how you drive and other factors. I'm easy on this car, but I'm only getting about 22-25 mpg. Any suggestions on why this is happening?

2007-04-22 12:10:16 · 19 answers · asked by crazy_in_tangles 1

I have a Dodge Ram Quad Cab 2006. It has already had 4 recalls on things in the truck. So I am thinking about trading it in for a 2006 or 2007 Ford F150 with the quad cab? Advice as far as room? I have 3 small kids still in carseats (no way am I going the mini van route) Any recalls yet? I have great credit so about how much is the average payment???

2007-04-22 08:31:33 · 15 answers · asked by Rina 5

I am asking how to check the level in the transmission. I have looked myself, and even talked to the people at the ford place, and a 2004 explorer, does not have a dipstick. like I said, this is a pretty stupid move!!!!!!!

2007-04-22 07:13:50 · 5 answers · asked by BOB R 1

2007-04-22 02:11:32 · 3 answers · asked by Anonymous

2007-04-21 23:23:49 · 18 answers · asked by floatnfun 4

2007-04-21 16:02:38 · 7 answers · asked by angelml@sbcglobal.net 2

and where do I look at on the eng. to see?

2007-04-21 12:24:12 · 8 answers · asked by lneck24 1

2003 ford taurus front brakes

2007-04-21 04:41:48 · 9 answers · asked by SCOTT W 1

2007-04-21 00:30:00 · 3 answers · asked by wayne g 2

I have a '97 Ford Contour GL with rear drum brakes. I was wondering if there was a disc-brake conversion kit available so I can remove the drums entirely. Serious answers only, thanks.

2007-04-21 00:28:15 · 4 answers · asked by aviationboatswainsmate 2

I have a 2.3l 4 cylinder mustang. It only has 105hp. How much money and what all you think it would take to put it up to 200hp without an engine swap?

2007-04-20 21:34:32 · 8 answers · asked by psilocyphener 3

Hello. I recently tried to fix the door ajar light and alarm on my 1998 Ford Explorer. I tried some remedies including pulling out the fuse for the charm. Although the noise went away, I could not use the speedo. I returned the fuse to its proper place and now the battery is being discharged. I had the alternator and Voltage Regulator tested and they both were fine. I swapped the regulator but it is still discharging the batter. Any suggestions anyone?

2007-04-20 18:41:41 · 3 answers · asked by Anonymous

http://www.automobilemag.com/auto_shows/2007_new_york/0703_2008_ford_expedition_funkmaster_flex_edition/

L M A O !

2007-04-20 16:02:47 · 6 answers · asked by gr 5

2007-04-20 12:00:21 · 4 answers · asked by kev's mom 1

It has 180k miles and is making some roaring

2007-04-20 11:43:01 · 5 answers · asked by Cheffo 1

1997 Ford Expedition with Factory Installed class "A" hitch package. 1st time I've had to tow anything, and I've got no power to the 7 terminal lighting connection. Fuse in under-hood main fuse box is good (slot-1, 20 Amp). Fuse in Engine Mini-Fuse box (slot 2, 20 Amp according to the owners manual) is a relay, not a fuse. Swapped with another of same type and it didn't help. Chilton's Manual and vehicle owner's manual have no information on wiring of trailer lighting connector (typical for Ford). Somebody told me Ford installs a "Dummy" fuse or relay when they install a factory hitch as a "Place Holder", and that it has to be replaced with the real thing to get power to the trailer lighting connector. Anybody out there heard about that? Any idea where it might be? Any ideas at all? Anybody wanna loan me a gun so I can eat a bullet (I'll need some A-1 sauce too, let's be real)??
Thanks in advance for any real help. -Ken

2007-04-20 11:30:25 · 6 answers · asked by kdrevette 2

2007-04-20 08:44:41 · 6 answers · asked by tejas_ryan 2

I asked my friend to teach me how to drive a stick and he agreed but he warned me that a Cobra is not a good car to learn how to drive a stick because it's harder to drive than most manual cars. Is that true or is he just full of sh*t?

I know that he loves his baby and he went on about how this is a limited edition....etc...

2007-04-20 08:38:15 · 7 answers · asked by Dragon2323 3

when the press this button, the symbol 0/0 appears in the speedometer panel. what is this button for? Another thing where is the switch off / on button for the digital clock in the car

2007-04-20 08:32:34 · 5 answers · asked by tejas_ryan 2

I'm new to the Mustang thing, but the 8 cylinder seems a bit underpowered at just 215hp. There's got to be an easy and quick way of unlocking a lot of horsepower on this monster motor. Any suggestions?

2007-04-20 08:14:17 · 7 answers · asked by Sandfrog 3

I was reading Januarys issue of Road and Track and they had a Mustang VS. Corvette article and i was looking at the stats of the Mustang GT500 and it said its top speed is 156 but i know its more then that but next to the 156 ithad a * and i looked at the bottom of the page and it said it was an Electronicly Limited Speed. Does anyone know what it means?

2007-04-20 06:40:22 · 7 answers · asked by Anonymous

2007-04-20 06:30:09 · 9 answers · asked by just_out_side 1

2007-04-19 16:07:31 · 4 answers · asked by Anonymous