Chevrolet

I plan on getting a 89' or 92' 2Dr. Blazer, I was wondering if anyone knew where I can get some interior pics of one and how many people it could hold.

2007-02-26 09:49:09 · 4 answers · asked by Anonymous

2007-02-26 08:24:45 · 6 answers · asked by seth n 1

i know there are 4,710 with silver exterior, but i need the numbers of how many were silver with a silver leather interior

2007-02-26 07:31:20 · 2 answers · asked by goatpontiacgtojudge1969 1

several years ago I cut the coil springs, I am in love with the stance of the car, but of course the ride is bouncy. I was thinking of air bags, but I would like to know if someone makes an adjustable strutt or some other lowering method for this year model.

2007-02-26 07:12:36 · 4 answers · asked by smokey 1

when I turn the key to the start position, nothing happens and then when I bring it back a little it bumps, then forward and back it bumps and then sometimes turns over normal, the BRAKE light in the dash comes on. could this be the starter or the ignition box on the column going bad? 75 chevy truck

2007-02-26 05:25:42 · 5 answers · asked by wheels47012 3

mines a 75 chevy truck, how hard would it be to switch the secondaries to mechanical on the 4 barrel?

2007-02-26 05:04:43 · 1 answers · asked by wheels47012 3

yep, its overheating, everything was fine the day before but yesterday i started it up low coolant light came on, so i filled the coolant tank and after driving a bit, my engine was still overheating, so i turned heat on but it only blew cold air out

the temperature outside has been 20-40degrees last few days

2007-02-26 04:12:01 · 5 answers · asked by ironman_on_enb 2

what is the diferent of these corvette vette? to the others corvettes?

2007-02-26 03:46:12 · 3 answers · asked by juan g 1

or would it look silly?

2007-02-25 18:53:48 · 9 answers · asked by Anonymous

It has a 350 in it...and it squeals really loud. I took all the belts off and it still does...but it only does it when you punch the gas metal in neutral or park. it's just a real quick, loud squeal...what could it be?

2007-02-25 16:50:32 · 10 answers · asked by Halls of Colours 2

Even if it bolts up (to mtr) what will happen with the engine making 250HP & 280lb/ft torque? Will it tear up in a short amount of time? I do plan to run it with a 2.56 or 2.73 rear end & its in a 88 caddy brougham so it will be a heavy car.

2007-02-25 16:29:03 · 8 answers · asked by Willis C 3

Im looking for an accel dfi fuel management system for a 4.3 v6 chevy. Its going to be turbocharded and im going to set up a mpfi system for it. Also i need to find v6 fuel rails?

2007-02-25 14:50:22 · 1 answers · asked by Tony O 2

2007-02-25 14:19:39 · 9 answers · asked by Anonymous

I bought my truck on Jan. 10th. It's a '98 Chevy 1500 4x4 with the 5.7 liter vortec. I love it. When i bought it, it was around 0 degrees F here for a long time. I noticed i was getting around 10 to the gallon and i was kinda pissed about that. But now it has warmed up to around 50-60 degrees fahrenheit, and it's been getting like 15 to the gallon in the city. Why does the temperature affect it so much? This never happened to any of my other cars...?

2007-02-25 13:42:23 · 5 answers · asked by Halls of Colours 2

Anyone have any ideas/tricks on replacing quarter panels? I have a 68 Camaro and 68 Chevelle to replace both rear quarter panels on. The outer wheel houses will also be replaced.

2007-02-25 13:36:41 · 3 answers · asked by ric9757 3

2007-02-25 12:57:48 · 6 answers · asked by BIGTONE 1

2007-02-25 10:29:34 · 10 answers · asked by cijjs 1

2007-02-25 10:13:31 · 2 answers · asked by James D 1

2007-02-25 10:08:21 · 9 answers · asked by Anonymous

2007-02-25 09:59:07 · 5 answers · asked by Anonymous

Hey, I have a 98' chevy blazer LT. it was my fathers but i have recentyl aquired it. Jus for info purposes, it is a vortec v6 4.3 liter. 190hp@4400 (stock that is)(o an its automatic also). now i jus went out to a empty street and timed my 0-60 time, i clocked it at 9 seconds. Is that a bad time? I realize that its an older SUV, and i was jus wondering how it compares to some of the newer type cars. And what are (if any) cheap any non-major things i can do to my car to improve it time. thanks.

2007-02-25 09:48:34 · 3 answers · asked by frogmand22 2

2007-02-25 09:41:40 · 4 answers · asked by luckeytrouble 1

tell me what wire goes to what

2007-02-25 08:54:27 · 3 answers · asked by jesse t 1

i think it was 3.08 but im not sure.the trans is a th350

2007-02-25 08:49:18 · 6 answers · asked by kpnc 1

I have it loaded on and it will only work in tow/econ mode. If I tune it to performance, extreeme or czy lry. than it will act like the trans retards the motor. What do i need to do?

2007-02-25 08:46:46 · 2 answers · asked by Anonymous

It is coming from the front end- to middle of the vehicle, wet or dry conditions.

2007-02-25 08:00:04 · 3 answers · asked by Cook C 1

2007-02-25 06:55:10 · 9 answers · asked by Emily H 1

1966 chevy impala ss with 327 eng and 2 speed powerglide auto trans. Has recently started slipping after it shifts into drive. I've made sure the fluid level is up, replaced the screen and vacuum modulator. I've attempted to adjust the low band - I can make it stick in low, but cannot improve the slipping after it shifts into drive. Also, after it starts to slip, sometimes if you give it enough gas (floor it) it'll go like hell. Is there anything I can do to remedy this while the tranny is still in the car? I'm not a professional mechanic, but have been rebuilding my various old engines for over 40 years now and would like to avoid a top dollar overhaul. As a side note, I also have a TH 350 that I could put in here. Does anybody know if this would bolt straight in without any modifications? Currently get 15/16 mpg with the powerglide and would hate to lose that mpg. Any ideas??? Thanks in advance...

2007-02-25 06:32:08 · 2 answers · asked by lee m 1

low idal and if i remove the air breather the truck dies ??? im at a lose had work done to the intake and now the check eng light is on and its almost like its slugish it dies in reverse . my timeing and fule intake in not ajustable if any one can shed light it would be helpful

thank you in advance

2007-02-25 05:52:35 · 2 answers · asked by Anonymous

1975 chevy truck, 350 HEI

2007-02-25 05:00:17 · 1 answers · asked by wheels47012 3