Chevrolet

On the way home today the speed odometer stopped working and the van would not go into 2nd easy and would not go into 3rd at all. We changed the filter, gasket, and cleaned the pan really well. It still does not seem to want to go into 2nd or 3rd.. Can someone help?
I do not have the money to pay for it to be put in the shop.

2007-05-25 15:44:29 · 6 answers · asked by babygirl_smiles2 1

Starts up ok but everytime you put in gear it dies, isn't that a vacmun leak going to trans?

2007-05-25 12:48:45 · 12 answers · asked by roncu44 1

I HAVE A 2000 CHEVY BLAZER 2 DR 2WD. MY FUEL PUMP JUST WENT OUT ON ME SO I WANT TO FIX WHATEVER I CAN WHILE MY TANK IS DOWN.

2007-05-25 10:55:48 · 8 answers · asked by jack n 1

Before you say American cars don't last, keep in mind my previous car was an '88 Cavalier - which my parents bought brand new in 1987 and then handed down to me - lasted me 19 years with 230,000 miles and had no major problems. This is why I'm considering the Cobalt, because I know Chevy puts out quality economical vehicles that can last until about 200K. Fords are out of the question; I've had 2 Ford cars, including a Lincoln, which both died on me before reaching 100K. I think the Hyundai Tiburon is a better looking car, and I'd rather have it, but I have heard bad things about Hyundais and I don't want a car that's going to give me problems around 40K. Honda Civics are cool and I know they last, but they're not as fancy and sporty as the Tiburon and the engine is too small for my liking. So, what would you pick, a Cobalt or a Tiburon?

2007-05-25 09:53:41 · 10 answers · asked by Anonymous

Trying to ascertain what transmission would compliment the LS7 505HP Corvette engine in a kit car.

2007-05-25 07:35:21 · 4 answers · asked by Anonymous

I am wondering if display can be fixed with minimal hassle. Do I have to go to the dealer?

2007-05-25 07:35:11 · 6 answers · asked by MB 1

are all Z71 pickup's for wheel drive?

2007-05-25 06:37:17 · 8 answers · asked by Anonymous

i need the numbers for the dome lights in the middle of the cab roof , two round adjustable map lights towards the front of the cab roof, door lights and also the fog lamps.. i want to replace them with some bright white aftermarket bulbs.

2007-05-25 06:28:53 · 3 answers · asked by shortstoperic7_2000 2

My cousin bought a truck by chevrolet, it looks like an avalanche but its not.it starts with an r.

2007-05-25 02:29:25 · 11 answers · asked by Anonymous

Can I do it myself or do I need to take it to a service station?

2007-05-25 02:08:52 · 2 answers · asked by Adam B 2

It seems that GM owns Nascar. I see Fords smoking Chevy's at the drag strip every weekend. Here in the North East USA. Fords and Dodges rule the tracks. I don't get it!

2007-05-24 16:36:29 · 5 answers · asked by Robert B 2

and if so what size?

2007-05-24 15:39:16 · 8 answers · asked by Anonymous

2007-05-24 12:15:12 · 5 answers · asked by beautifuldizaster05 1

just wondering what the price range is on a new pair of rotors are? and the cheapest place to buy them...

(i've looked on google 4 hrs w/ no avil)

2007-05-24 11:49:54 · 8 answers · asked by calvin s 1

I have a '57 Chevy restored to original (almost). The car is Madador Red with a red/white interior. The code says it should be a silver/red interior. I love the red/white interior I have and it is exactly the same pattern/buttons as the silver/red. It needs to be replaced, but I can't find the red/white only can find the silver/red, which I do not want because I would also have to change the side panels. Does anyone know where I can get another set of the red/white seat covers?

2007-05-24 11:04:42 · 1 answers · asked by kingsley 6

I have 2001 Malibu with 65000 miles on it and I need to get my Brake Rotors and Brake Pads replaced. Few Questions:

Which one wears out faster? Pads or Rotors?
Does it worth paying lot of money for a rotor or a pad? Or should i just get the standard?
Also, has anyone used or know anything about ceramic brake pads? Is there a much difference? Thank You In Advance!

2007-05-24 07:01:01 · 5 answers · asked by Anonymous

But this what the mechanic says is the reason my Chevy Tracker is running hot. That and some worn hoses. Is this possible? If it is how much should it cost to fix? I don't want to pull money from my insurance payment If this won't fix the problem.

2007-05-24 03:57:55 · 6 answers · asked by babydoll 7

I am looking at a Classic and have learned the LS/LT model is different, although they carry the same year.

2007-05-23 23:07:20 · 2 answers · asked by wimp1000 1

on the inside of the door the gear bx. is not letting it unlatch how can I get that bx. to release,

2007-05-23 15:46:47 · 2 answers · asked by ken&stephanie # 1

i have a brand new 07 duramax silverado. is this bad? i always warm it up but this morning i didnt..i just started it and left... i noticed my engine sounded loud till it warmed up on the freeway. you think i messed up my motor.??

2007-05-22 18:33:06 · 5 answers · asked by shortstoperic7_2000 2

2007-05-22 14:54:27 · 4 answers · asked by chocolatechocolatemm 1

2007-05-22 09:24:00 · 11 answers · asked by Sean 2

2007-05-22 07:44:57 · 4 answers · asked by Matt I 2

2007-05-22 04:40:11 · 3 answers · asked by eusdesa 2

2007-05-21 14:32:17 · 3 answers · asked by ctrucker 1

I replaced the 350 in my '72 K5,new motor, new rebuilt Rochester 4 barrel carb, new fuel pump, and filters; but the problem is it won't start on its own. A little shot of starter fluid and it'll fire right up. The spark plugs and wires, coil, and distributor and good. I'm lost and just want it to work. If you have any ideas or suggestions please let me know.

2007-05-21 14:02:24 · 8 answers · asked by Becky 2

This is a black vinyl top with tan liner. i found this number 48466 stamped in it. also found this partial number 764_ _112_ _98

2007-05-21 13:05:13 · 2 answers · asked by jack86vette@verizon.net 1

any one has a picture of a fuse box for this truck , someone gave me this truck and there is only like 3 fuse in the fuse box ,

2007-05-21 11:05:55 · 3 answers · asked by Anonymous

I have a duel pumper holly on a 350 with a edelbrock high performance cam. Right now when in park its idling very high. When i shift into gear it wants to stall - need to give it gas to keep it going. Also when accellerating, it hesitates before accellerating. Any suggestions be great. This car is new to me and i am not familiar with the carb setup.

2007-05-21 10:15:49 · 11 answers · asked by tonguefuzz47 1

1988 delta 88

2007-05-21 07:17:50 · 3 answers · asked by paige l 1