Chevrolet

I recently purchased a Chevy Cobalt, and just in the past week "Barney Fife" has started leaking a lot of oil. I just scheduled an appointment at the dealership, but has anyone else had this problem with a Cobalt?

2007-05-21 06:29:07 · 3 answers · asked by racehorsegirl83 2

2007-05-20 23:44:48 · 3 answers · asked by Vinay 1

The fuel meter is on the throttle body where the fuel lines connect. I was tightening the lines and it cracked on me.... I cant find anywhere where they sell just that part. Its a v6 2.8L and i live in arizona if that helps at all.... But i can only find the whole throttle body for $500, not in my budget...

2007-05-20 18:07:07 · 3 answers · asked by Nelson B 2

CAN ANYBODY TELL ME WHERE TO DOWNLOAD THIS MANUAL...I KNOW THERE IS A PDF FORMAT, AND I REALLY NEED IT. THANKS

2007-05-20 11:11:48 · 1 answers · asked by Timmy K 2

With the crossfire injection system? How many years did corvettes have this? THANKS!

2007-05-20 09:39:12 · 8 answers · asked by jrdrager 2

install something to keep the horsepower down, WAY down, so my teen can drive it without having the feeling of it getting away from him?? Thanks.

2007-05-20 07:54:56 · 11 answers · asked by steelyourself 3

where do you adjust the right [passenger] rearview mirror? manually?i couldn't find a knob to adjust it...so i tried adjusting it manually but it didn't really work.

2007-05-20 06:14:34 · 4 answers · asked by mary. 2

why were all of them so boxy and lack so much style, and the interior the depreciates so much as time goes by? i mean, in the 50's, 60's and most of the 70's had style in it, but when it comes to the 80's and 90's, they were box upon box upon box with horrendous interior design.

2007-05-20 04:11:11 · 7 answers · asked by Anonymous

It will rotate to engage the starter but won't rotate back to turn the engine off. What could be wrong?

I tried WD40 and Tapping while trying to rotate.

2007-05-20 03:44:02 · 4 answers · asked by Red 5

because the window falls misaligned! help

2007-05-20 02:18:04 · 6 answers · asked by chevellesr2fast 1

2007-05-19 23:02:43 · 4 answers · asked by whatsepultra 2

i want to restore a car from the year I was born, preferably a ford, Chevy or Cadillac. What was a good car for the year 1973?

2007-05-19 21:48:31 · 12 answers · asked by David K 1

Have a Chevrolet Lumina 1996 model. Bought it second hand and was fine for the 40 days I owned. Then I noticed the Security Icon on Dashboard stays ON even after the car has started. The same used to come on and go off earlier, after the engine started. Now a days, the same stays ON. Can someone please help me?

2007-05-19 20:02:14 · 3 answers · asked by ChevyFan 1

I got under the sub. and found a wire burned up from a starter bolt and don't know where it goes when replacing the fusible link. anyone knows? thanks alot.

2007-05-19 17:09:19 · 5 answers · asked by Milton 1

I have a 2005 Chevy Equinox, purchased from a Chevy dealer at the time this new SUV was released (about 3 years ago). Was one of the first to have this car in my area.

I just took it to a small, family-owned business this morning to have a trailer hitch installed (not my family, but the only other place we've had service on this vehicle is the dealership). When I went to pick up, the owner told me that it looked like it had been in a flood-- when they were installing the hitch they found internal bolts that were rusted that should not be with normal use.

Since we bought from a dealership as new, was not told it had any damage previously, and really have not had any mechanical issues from this supposive flood-- what do I do now?

Any legal experts out there? I live in New York State.

Thanks!

2007-05-19 15:41:39 · 9 answers · asked by annalisas_mommy 1

ok i was watching tv and i seen there was this pube hair talking about u tap'ed so cheerleader then his friends said in what is said his camaro do u know where u can get this commerical at?

2007-05-19 15:06:14 · 7 answers · asked by Anonymous

give me some comments.

2007-05-19 10:35:32 · 5 answers · asked by cubbies1216 2

i need to know what tools to use and how much time it should take as well as pictures if possible

2007-05-18 08:16:08 · 3 answers · asked by diromewilliamson 2

i need to know what tools to use and how much time it should take as well as pictures if possible

2007-05-18 08:04:28 · 7 answers · asked by diromewilliamson 2

I am looking to purchase a tahoe in the next couple of months. I have been exclusively looking at 4X4s within the 2002 to 2005 range(basically under $20,000), but I had a car salesman tell me that the 2WD tahoes come standard with traction control. Is this true? I live in an area that gets ice and snow quite a bit in the winter and I need something to get my kids to and from school, so either traction control or 4X4 is really important. I would appreciate some help clearing up this matter. Thanks in advance!!!
Oh, and how can I tell if a 2WD has trac. control? Thanks!!

2007-05-18 08:04:00 · 8 answers · asked by mommasquarepants 4

does anybody know if a 40 chevy and a 40 pontiac share the same frame? or know where i can find out

2007-05-18 06:17:02 · 4 answers · asked by turkey 6

Will a rear bumper and hood from 2002 camaro fit on a 1994 camaro?

2007-05-18 05:30:09 · 16 answers · asked by ScarletRevoltRx7 1

The light is on the left-hand side of the "dummy light' section. It came on yesterday for the first time, and seems to drain gas. I noticed that the guages flutter a bit. Last night when I stopped the car it took a bit to turn off. I am hoping that it is a simple fix. I had not seen any information on a GEN light before, and can not find anything in the Haynes Manuel on what lights are in the instrument panel. PEASE HELP!

2007-05-18 05:14:01 · 7 answers · asked by Derrick R. Kearney 1

I have a 1980 Camaro steel hood with approximately a 16" OD hole cut in it for the breather to come up through.

On top of this is a '67 Corvette 427 fiberglass hood scoop to provide some additional clearance.

I just bought a 2" carb spacer, and now I lack about 1/2"-3/4" for the breather to clear the top of the hood scoop when the hood is closed.

The scoop is only screwed on right now, but I am going to rivet and bond it later.

2007-05-18 05:06:35 · 2 answers · asked by Tim Doggy Dogg 1

I know my leaks are from the fill valves can they be rebuilt or new gaskets installed to fix this or do I need to replace the hoses?

2007-05-18 04:53:35 · 6 answers · asked by Scott F 1

2007-05-18 04:12:48 · 14 answers · asked by Rudy E 1

nevermind the catagories i feel!

2007-05-17 13:07:15 · 1 answers · asked by carmen A 1

Wanted to know if any one could tell me where to locate a/c relay for that truck ? Is in the cab or under the hood

2007-05-17 10:50:20 · 5 answers · asked by juniorbeata 1

What would cause a fuel relay switch to go bad?
having trouble with my 99 tahoe not starting and have changed the fuel pump and still had trouble then found that the new replaced fuel relay has gone bad. What would cause this to happen, as soon as we changed it the car had fuel pressure again and started right up. The is something from point A to point B that is causing this to happen. Any suggestions? The friend working on this has never seen one burn up.

2007-05-17 07:59:05 · 5 answers · asked by Anonymous

It's not making any noises and appears to be driving fine. The gas cap is seated correctly and nothing appears to be wrong but the check engine light came on and I don't want to pay the $75 if I don't have to.

2007-05-17 05:34:23 · 12 answers · asked by Codak 1