I need to install spark plugs and wires for my 1996 Chevy blazer my self i need a diy step by step instruction

Question

i need to know what tools to use and how much time it should take as well as pictures if possible

Answer 1

The quee answer only tell you how to change of spark plug wires but not the plugs.Change plugs is much more difficult.first you need the right tools,if you never done before,I suggest go to auto part store tell them what you want,then they will sell you the right tool.How long you need ? Complete depend are you a handy man or not.First lo cat the plugs then disconnect the wire and change the new wire as quee show you after put the tool in and turn anti clock wind to lose it and remove it then find the Right plugs(also buy from the store you buy tools) and put in then connect the wire and repeat same to removed another one until all done.Some time you could have problem to reach out.

Answer 2

you desire the plugs and wires, a spark plug socket, a socket wrench, and a gapping coin until the plugs you purchase are production facility gapped (which many are). maximum vehicle areas shops will hollow them for you in case you ask, or make particular that they are gapped properly. constantly double verify once you purchase plugs...which you're paying for the ultimate ones...necessary. the incorrect plugs would reason engine harm. Pull off one plug wires from the distributor cap, and the plug itself.....adventure it up in length to between the recent wires......Use your spark plug socket to do away with the plug. hollow the recent plug if mandatory.....wrench it returned in. that is an extremely stable thought to do one plug and twine at a time, or you hazard messing up the firing order by using forgetting which twine went to which plugs.

Answer 3

Here you go.