Chevrolet

Code 24 says the speed control sensor, were is this sensor usually located. Are there any tests I can perform to determine causes. Thanks in advance!

Peace...........

2007-06-01 17:21:10 · 2 answers · asked by Rick K 3

My life is stupid and i need a hobby. Im thinking of building a hot rod for something to play with. What i want to know is can i build a 600-700 Hp motor that i can drive on the street and have it be reliable for $10,000 or less for the MOTOR? One thing i want is a whipple charger. I dont really want to go the nitrous route if i dont have to. So is it possible or should i find something else to do?

2007-06-01 16:39:49 · 10 answers · asked by Anonymous

2007-06-01 14:09:05 · 5 answers · asked by tim -wi 2

2007-06-01 13:29:21 · 5 answers · asked by Anonymous

2007-06-01 10:55:32 · 1 answers · asked by scott l 1

2007-06-01 09:36:55 · 5 answers · asked by scott l 1

Does anyone know any online websites or people who repair or have steering columns for an 89 RS camaro. I've got it in the shop right now because it wouldnt start but it was a simple short in something under the distributer cap, but when it was dead my roomate helped me push it off the road and he wanted to do the steering and the bush was needing replacement before anyways but he pushed way to hard and completely turned the whole column, ignition and all so it has to be completely replaced.

The shop it's in now has apparently called everyone they know in the southeast for one and no one seems to carry them anymore, but they're still looking and I'm just trying to look around as well.

2007-06-01 05:39:45 · 7 answers · asked by Solomon 1

what year did gm put the chips in the trucks that autamaticly turned off the vehicle after you got going so fast

2007-05-31 21:42:50 · 3 answers · asked by lil BIG PUppY 1

2007-05-31 12:16:02 · 3 answers · asked by Anonymous

I know the tire readings are wrong but I could not find the right psi anywhere, and I checked the location that was in the manual

2007-05-31 12:01:38 · 11 answers · asked by sac dph 2

me? 1969 chevy nova - black (if you go to google and type in "chevy nova" the first one should be a black one, i want it to look just like that) and truck - 2000 chevy silverado single cab, black, side steps, 24' rims, 3 ~12' speakers between the bucket seats, with a 350..

2007-05-31 11:51:57 · 22 answers · asked by ~broken~ 3

2007-05-31 07:11:21 · 4 answers · asked by Mike 1

This just started and the part seems to be located behind the blower moter,it clicks for about a minute when you turn the key on or off,can anyone tell me what it is and the easiest way to reach it?

2007-05-31 06:41:56 · 4 answers · asked by chas d 1

I have a 1994 chevy cavalier 2.2 automatic and about two weeks ago...my axel popped out of the tranny. I was able to buy and replace the part but that one popped out too so now I have to buy another one. I wouldnt have to replace them if the boot that holds the lube wouldnt keep getting shredded. The first time it broke loose it banged around everywhere and busted a huge hole in the transmission side pan. At least that didnt happen this time because it happened pulling out of the driveway as opposed to the first time when I was going down the street. Anyone have any suggestions on how to permantly fix this problem. Or does anyone know of a pdf repair guide for this particular problem. I am a know nothing about cars.

Thanks

2007-05-31 06:38:45 · 3 answers · asked by Mike B 1

I am looking to get a new fuel pump for a 97 Chevrolet Blazer. After checking with a fuel gauge i found that I had to crank it until the pressure built up to 60, then it would start. With the starter in the "on" position it only read 15 psi.

2007-05-31 06:19:33 · 7 answers · asked by Brandy 2

2007-05-31 03:36:38 · 2 answers · asked by Anonymous

I would like to know why the particulair webbing is different on my 396

2007-05-31 01:11:12 · 5 answers · asked by alojedaz28 1

Its got a new transmission and engine, so i need some more HP!

2007-05-30 14:48:02 · 6 answers · asked by Cummins Diesel style 1

2007-05-30 13:38:28 · 6 answers · asked by mkwkew 1

2007-05-30 08:10:55 · 9 answers · asked by stacie d 1

2007-05-30 05:09:39 · 6 answers · asked by b.eugene l 1

I will be looking to purchase a new vehicle in Sept/Oct. I am really leaning towards the Chevy Cobalt. Anyone have one and would share their experiences?

2007-05-29 13:59:46 · 10 answers · asked by Anonymous

I'm talkin about Chevrolet trucks, of course.

2007-05-29 13:48:31 · 4 answers · asked by Anonymous

How do I replace a rear turn signal bulb on a 2002 Chevy Cavalier?

2007-05-29 13:41:58 · 3 answers · asked by Tim6298 2

2007-05-29 12:21:50 · 3 answers · asked by rockhard21269 1

I don't care what color the ext. or int. are. I can change those if I need to. But the car must be in excellent driving condition and have little to no rust. It doesn't need CD player, or even a radio, but everything must be in at least 'inspection-passable' cond., including all the engine and mechanical parts. (not very car-language savvy, haw. ^_^; ) Must be a 4-Door 1967 Impala. 7000 or less. Power steering is a plus but not necessary. Can anyone help me out?

2007-05-29 05:46:12 · 4 answers · asked by Kaiverta 3

the blue that my subarban is it could be bahama blue , but i see fords with the same light blue it looks like the next botton blueon this page can any one help?

2007-05-28 17:53:53 · 4 answers · asked by drobdavis 2

Does anyone have and links or websites where i can see stuff to make my 73' Corvette a street racing car. Stuff like rims, seats......?

2007-05-28 14:55:25 · 8 answers · asked by jboo 2

My Clutch pedal in my 1985 Corvette (with a 4+3 transmission) has trouble building up pressure and the clutch itself will not disengage sometimes in the mornings and when it's cold out. However, when it's warm outside, I don't have any problems with the clutch. I put in a new clutch and master cylinder last year before I stored it in the winter, and the clutch worked fine then. The system is full of fluid and I can't find a problem. Any ideas?

2007-05-28 13:31:59 · 2 answers · asked by jscott250 2

1991 suburban,350,700r4,4x4, having no previous issues all of a sudden the truck would not move after stopping at a light. i can rev the motor and will not get any movement at all, please help

2007-05-28 12:54:38 · 14 answers · asked by Anthony F 1