Chevrolet

2007-06-05 21:37:59 · 4 answers · asked by grady c 1

The engine has only 100,000 miles give or take a few. I am getting new headers and mufflers. I want to know how much horsepower i have now so i can get a ball park estament on the power gain

2007-06-05 15:41:41 · 1 answers · asked by Justin G 1

i own a 1969 bel air and it doesnt have a hood. i have access to a 67 bel air hood but im not sure if it would work. i am wondering if anyone knows what hoods would work with a 69 bel air.

2007-06-05 14:22:11 · 2 answers · asked by josh_sulser 2

2007-06-05 11:59:16 · 4 answers · asked by jssckly 1

My camaro needs a new EGR valve. What happens if i dont replace it? I have heard both stories of my car needing it and not really needing it. Any information will help?

2007-06-05 11:26:24 · 5 answers · asked by Victoria 2

I own a 1977 Chevy K10 4x4 with a 4 barrel carbureted (holly) 350. When I push the accelerator pedal to the floor - or 3/4 of the way down, a knocking sound begins and the car does not seem to further accelerate from it's current speed. When the tranny is in nuetral there is no noise, and the engine is as it always has been. Could this be the result of needed carb. adjustments, or is the torque converter going bad? As I said, it drives just fine untill you try to accelerate quickly or push the pedal all the way to the floor. Thanks for any answers ahead of time!

2007-06-05 10:35:15 · 7 answers · asked by tyler e 2

2007-06-05 10:23:05 · 4 answers · asked by mdalthorp 1

2007-06-05 08:00:51 · 6 answers · asked by Riff 1

Id like to get about 350-400 horse out of a stock 454 from a dually pickup.. they have about 245 or something stock. Id rather not mess with the bottom end.. its all really nice, ive dropped the pan and all that junk. Trying to do this without the bottle. lol

2007-06-04 18:24:19 · 4 answers · asked by Jay K 1

I have changed plugs, wires, cap, rotor, mass air flow sensor, idler, tensioner, belt, altenator, O2 sensors, cleaned my throttle body and i am still getting a check engine light based on the mass air flow sensor dose anyone have an idea why??

2007-06-04 12:21:21 · 2 answers · asked by Blazed96 1

2007-06-04 11:26:29 · 10 answers · asked by Keith G 1

2007-06-04 10:36:18 · 6 answers · asked by Army mom 1

i have chevrolet " barin " and i lost my code for radio , what can i do?

2007-06-04 06:45:30 · 7 answers · asked by Anonymous

2007-06-04 06:00:55 · 5 answers · asked by Carl W 1

It suddenly went out while driving. I can push the on/off button on the steering wheel and it lights up as though its on. I can also push the set button and the cruise indicator light comes on but it doesn't hold my speed.

2007-06-04 05:52:43 · 4 answers · asked by hubnuny 1

I have a 2001 Malibu and i recently changed the brake pads and rotors. ABS light has been on for the last few months and i was hoping that after getting new brakes and rotors the light will go off, and it hasn't. what should i do? brakes are working perfectly fine, but it irritates to see the ABS light on. whats the deal?

2007-06-04 03:10:39 · 7 answers · asked by Anonymous

Column shift automatic

2007-06-04 01:11:21 · 4 answers · asked by John H 1

The abs light stays on and when I turn the steering wheel, It feels like something is loose. The teraction light stays on also. What could this be?

2007-06-03 18:56:07 · 6 answers · asked by Shawty 1

2007-06-03 14:51:50 · 7 answers · asked by Rickey C 2

its like a 3 system set up and i need to know what hte piece that goes into the slot to release the spare tire

2007-06-03 14:02:02 · 3 answers · asked by dishere2003 1

If I have determined I have a fuel pressure problem is the solution to that a new fuel pump?

2007-06-03 13:25:03 · 6 answers · asked by Anonymous

I have checked all the wiring for cuts or niks and have not found any. My turn signals and running lights all still work the only thing that does not work are my flashers and brake lights. I have changed out the brake light switch and that did not fix it. I also changed the turn signal switch inside the steering column out of another truck and that did not work either need help.

2007-06-03 13:21:55 · 7 answers · asked by beckort_10 1

I was just wondering cause I've been reading about engines cutting out at 90+mph

2007-06-03 11:26:07 · 6 answers · asked by Jeff S 5

The first shop I took it to said the code was in the ignition but don't know what part so I changed evey thing i can think of like the computer, modgel, all three coils, spark plugs and wires, throdle senser, crank senser, can't find any vacum leaks have good fuil presher and changed fuil filter I have to much money in it to give up now!

2007-06-03 10:05:36 · 2 answers · asked by metalcraft44 1

2007-06-03 08:30:08 · 4 answers · asked by Anonymous

2007-06-03 06:55:14 · 4 answers · asked by sandra a 1

2007-06-03 03:22:17 · 3 answers · asked by Eddo 2

When its in park...when I drive....Needle shows "low gas" and then it goes up........then back to low gas again.
This is a 2006 Chevy Silverado. Yes, it is still under warrenty.Just want to get a 2nd opion.

2007-06-03 01:18:29 · 6 answers · asked by StarGirl 3

I hade my steering worked on and now I get a code that says "Drivers Front Deployment Loop Open" they couldnt seem to clear the code with there scanner and my air bag light is on now.

2007-06-02 16:06:41 · 3 answers · asked by Cory S 1

I have the above car. Its a V6. As you all know, not the fastest car on the block. I want to make it a little faster. Mainly focusing on acceleration and sound. Not that much on top speed. I only have about 400 to spend, and i know i can not get anything that will drastically improve speed, so dont write that. Also if i had to choose one or the other, which would be better, headers or exhaust? Who's the best brand for headers? for exhaust?

2007-06-02 04:01:46 · 3 answers · asked by shiznizzal24 2