Chevrolet

Oil not changed for a long time. New heads. Top end cleaned when heads were off, but guck still in oil flow chambers, preventing oil from getting to rocker arms. Someone said use diesel fuel, but i need to run the the truck to loosen particles.

2006-12-12 02:32:30 · 5 answers · asked by jaxon918 2

I owned one with a continental kit on rear bumber it was read with a black rag top, I dthink it was a great car

2006-12-11 20:02:44 · 4 answers · asked by James P 1

Shes bored 30 over w/truck rods,an Torque Cam w/dubble timming chain/gears. 882 Heads; h/o intake w/2 line Holley 600cfm carb.It will go pretty good?

2006-12-11 15:18:12 · 4 answers · asked by William I 1

2006-12-11 14:56:05 · 5 answers · asked by Anonymous

2006-12-11 14:30:59 · 4 answers · asked by Cowboy 1

i dont have the book that came with the car and i need to know which fuses are which

2006-12-11 12:15:28 · 4 answers · asked by Anonymous

I just purchased a used 06 cobalt automatic (did not come with an owners manual) and the wife ran something over and smashed to tranny pan and is leaking. I know there is no dip stick but i did find the filler hole. After I replace the pan how much fluid should it take to fill the tranny.

2006-12-11 10:22:05 · 8 answers · asked by kclarkconstruction 1

should I put 4 winter tires on my car, or have you done ok in the winter with just 2 front winter tires?
Studded, ro just winter?
need to know b-4 tomorrow!!

2006-12-11 09:35:51 · 7 answers · asked by lil' angel 6

2006-12-11 08:46:33 · 13 answers · asked by drop and destroy 1

If this helps or if you know the answer its a 1993 Chevrolet Cavalier. 4 door and it says RS on the side ( if that means anything) sry all I know about cars is how to drive them

2006-12-11 04:31:13 · 17 answers · asked by Midwest neck cutta 2

2006-12-11 00:48:34 · 18 answers · asked by tbonee61 1

72 Chevelle 307 has new plugs and wires and still runs rough, timing is OK , 88, 000 miles -

77 Impala 305 idles and runs rough, spark is OK, 130,000 miles, is there a good hi perf 2 barrel carb? -

84 Corvette CFI , runs OK, idles fast ,1500 rpm, and check engine light comes on, 68,000 miles -

92 Camaro RS 305 TBI, lopes at idle,stalls when coming to a stop, 130,000 miles, sensors and EGR replaced

2006-12-10 21:36:27 · 9 answers · asked by Paul S 2

same year truck its ok if the factory exhaust dosent bolt up to it. just wanting to know if they will bolt up and clear everything

2006-12-10 13:30:57 · 6 answers · asked by roger_ray_2004 1

So My 2001 Cheverolet Impala LS (3.8L Engine) has recently started to have a "rough idle" which also carries over to coasting (foot off the pedal) when driving.

RPM's will bounce from 1000 to 750 then bounce back up to around 1200 and up.

This does not/not happen when the car is under load (ie: accelerating - as I know I had a problem years back with a corroded spark plug wire which would fire, but at around 2500-3000 (heaviest load) it was unable to deliver, and would cause much more noticeable bogging.

I have checked the plugs, wires, terminals, no corrosion whatsoever.

I am leaning towards this being more of a Transmission problem or perhaps engine.

This car certainly has had it's share of problems, and had a used 2004 Transmission put in it (out of a wreck with 13K on it) about 30K ago (making the tranny about 43Km's old - never rebuilt).
This was replaced about 1.5 yrs ago.

2006-12-10 11:52:52 · 6 answers · asked by snjc_canada 2

my 72 chevy (c10, manual trans) blinkers stopped working the other day. neither blinker flashes, it just stays illuminted when i hit the switch. the emergency flashers work fine as long as im off the brake. if i push brake pedal the flashers stop flashing and stay lit. im thinking it has to be a ground problem? but could it also be in the brake switch or turn signal switch? any info would be appreciated

2006-12-10 09:37:16 · 12 answers · asked by smallblock_chevrolet 2

They say you can run a engine without any oil so I tired it on my 1975 Chevy Pick up on a bet...that darn engine locked up three miles down the road.

2006-12-10 08:00:37 · 6 answers · asked by Anonymous

If you have an HHR please tell me how it is

2006-12-10 07:00:16 · 6 answers · asked by MO62 1

2006-12-10 02:34:28 · 6 answers · asked by kat 1

I have seen some with and some without the spoilers.

2006-12-10 02:24:45 · 4 answers · asked by Bid D 2

What parts from a 1988 chevy 4x4 will work on a 1996 chevy 4x4? Were stripping the 88 down and wondering what all to keep.

2006-12-09 21:23:02 · 7 answers · asked by alablady 1

I own a 1987 Chevrolet truck (custom deluxe)step side. When the headlights are on the right rear turn signal will not work. When the headlights are not on it works fine. Whats the problem?

2006-12-09 14:50:53 · 8 answers · asked by calicomama96 1

what would be the max RPM for this motor? max as in not doing engine damage.

2006-12-09 14:03:10 · 10 answers · asked by wheels47012 3

I rode home with my friend yesterday who has a 73 year, his door panels had square holes, and he has dual tanks, I thought power windows and locks didnt come out until 77, and dual tanks until the 80's year trucks? anyone know?

2006-12-09 13:59:39 · 6 answers · asked by wheels47012 3

it was doing fine one minute and then no 3rd or 4th gear there is no cumputer in this truck

2006-12-09 12:00:06 · 11 answers · asked by couchpototo33 1

i've got 03 chevy cavalier and i will be getting 17" rims soon. I don't want that much gap between tires and wheelwells.

2006-12-09 09:31:51 · 5 answers · asked by bugda76 1

I have a 1987 Camaro V6 coupe. This started 2 days ago I was pressing on the gas as I normally do. Then it started making this loud clanking sound, now I have to use my big toe to push on the gas or it starts making it again. Unfortunately I still have to drive it though other wise I would wait till it is fixed. What it wrong with it???

2006-12-09 07:08:48 · 6 answers · asked by jules 2

Do I have to remove the pump on my 92 Blazer to replace one of the hoses which are bad on my power steering pump,If not what is the easiest way

2006-12-09 01:40:58 · 3 answers · asked by coltjason1957 1

Put on complete new brake lines and now I can actually stop but only when I put the pettle to the floor.

2006-12-09 01:27:45 · 3 answers · asked by Big D 1

2006-12-09 00:23:26 · 4 answers · asked by ben m 1

2006-12-09 00:05:54 · 2 answers · asked by Paul R 1