Car Audio

2007-03-18 08:54:24 · 2 answers · asked by blitz 1

the model number is KDC-MP2035 and it says ipod ready. just wondering what cable to use cuz there seems to be many to choose from..which one is right for this model and will work?

2007-03-18 08:26:26 · 3 answers · asked by Anonymous

i have 2 12" 1200watt subs, and jus bought a 2 channel 2400watt amp. and im new at this car audio thing, and well ive usef a smaller amp before, never one this big. i was wondering what is the best way to hook up the amp main power supply. should i run it stright to my main battery for my car like i did with my smaller one, or will it drain the car battery too much? or should i get a seperate battery to hook up the amp to it. also if i get the seperate battery, wont it go dead after a few weeks? how should i do this?

please help

2007-03-18 05:28:35 · 7 answers · asked by ben g 1

ive installed it in my car and i got power and on my remote when i push the dvd setup button it shows me about 3 seconds of video then goes back to the blue "its unlawfull to blah blah blah blah, screen" so how do i make that go away? i heard about codes on the remote and installing a toggle switch which i would also like to know how to install... can anyone help me????

2007-03-18 05:20:09 · 5 answers · asked by M C 1

2007-03-18 00:51:38 · 3 answers · asked by tazz 1

does anyone know of any specific decks and/or subs that are known to work in older lincoln models?

2007-03-18 00:08:52 · 1 answers · asked by fredsnewslacks 1

Hi, My Ford ka2 radio recently stopped working. I found the fuse box but any idea's where the radio fuse is located???? Im not too keen on taking every single 10A fuse out to check if its ok...

2007-03-17 22:33:01 · 4 answers · asked by Anonymous

I have heard that you have to either bypass something in order to install an aftermarket cd player. Is this true? If so what do I need to bypass?

2007-03-17 21:29:02 · 3 answers · asked by Anonymous

Hi, I need to know, if I buy a 800W 2-channel amp.

Does that mean I can use 2 400w speakers?
What does the inches have to do with the speakers anyway?

And will a subwoofer maker the stereo system sound better? or it is not neccessary?

Thanx

2007-03-17 20:47:02 · 2 answers · asked by Anonymous

hi i have a 15 inch 1200 watt sub. it has dual 4 ohm voice coil. I am looking for roughly what amp/ config would work best. 2, 4, 8 ohms ? and if volume ?ft ^3 for enclosure.
thanks much
-joe

2007-03-17 20:27:20 · 5 answers · asked by Joe F 1

2007-03-17 19:44:01 · 2 answers · asked by mankkl 1

2007-03-17 19:32:10 · 1 answers · asked by Anonymous

i have an old speaker. the sound between treb and bass they mix together so it 's just so noisy. I want to buy a new one but donot know which types? my car is honda accord 96 lx. if you can show me some and some web. thank you

2007-03-17 19:27:28 · 6 answers · asked by Jack N 1

i have just bought a cheap sub system. it is a bazooka sub system at circuitcity. its model number is elp10190. i installed then and they dont' quite dont give me the bass i want. there is a gain and x over adjustments. how can in adjust these to give the maxium output of of my subs system? this is prob an easy question i am new to the whole car audio thing but am good with home theatre. thanks

2007-03-17 19:07:00 · 5 answers · asked by Dustin M 1

i have a boss 1600w 4-channle amp boosting my 2 subs, and have all speakers currently in my car hooked up to the factory harnesses on no amplifiers. i plan on adding 2 more speakers, and for these i bought a crappy walmart amp so as to power them just right. i heard if u run 2 different brand amps together you can fry your system. is this true? and if so then tell me how / why this is so. thanks!

2007-03-17 18:52:45 · 4 answers · asked by white_pimp2004 2

I need to know if this is going to work?
A Sony CDX-GT210 with 2 Sony Xplod XS-L123P5B
*52W x 4 S-Mosfet Power IC
*RMS Peak 23 x 4
*Preamp Outputs: 3 sets
*Preamp Output Voltage: 2 volts
SUBWOOFERS
Sony 12" Xplod Subwoofer (XSL123P5B)
*1300 Peak Watts
• 18Hz - 2kHz
• 4 Ohms
* 380 RMS
*Peak Power Watts 800 & up
AMPLIFIER
Sony 1200W Bridgeable 2-Channel MOSFET Amplifier with Variable Low-Pass Crossover
*1200W peak power
*500W RMS (continuous) x 1 @ 4 ohms, bridged
*250W RMS (continuous) x 2 @ 2 ohms
*200W RMS (continuous) x 2 @ 4 ohms
*Variable 50Hz - 300Hz low-pass filter
*40Hz EQ boost
*High-level sensing power-on
*MOSFET power supply
*Line level thru-put
_______________________________________
Also, What are the preamp outlets in the back of the stereo used for?

2007-03-17 18:28:52 · 4 answers · asked by vangilder_c 2

i want to know what type of clear "glass" i should mount them with. i basically want a shelf that i can drill holes in, put two speakers in, and have the bottom be hollow so i can slide some neons under it. needs to be clear and very inexpensive, but have no rattle. only wanna add 2 6"s. was thinking about plexiglass or something. thank you!

2007-03-17 17:55:00 · 1 answers · asked by white_pimp2004 2

to push two JBL 15" (each DVC 300 watts rms @ 2 ohm) subs to to their maximum limit should i use a monoblock (600 watts rms @ 2 ohm) or a 2 channel amp (300 watts rms X 2 @ 2 ohm)? eagerly waiting to know. thanks

2007-03-17 16:29:19 · 8 answers · asked by Anonymous

I want to put a new system in my car. The stereo is crapping out, so i want a new one. Prefferably 200watts. And i don't know if i want 2 10", or 1 12". And just what is a good amp that will push hard and not be too expensive.

2007-03-17 16:20:43 · 6 answers · asked by Anonymous

I'm looking to put a new system in my camaro, and im ot sure which brands to go with, any suggestions?

2007-03-17 15:50:40 · 7 answers · asked by karma 3

Hey guys im interested in purchasing a new system.. I dont want to wake up people in the next county but I definetly would like to be heard! Im not looking to spend 1000's of dollars..and simply want 1 loud *** bangin sub.. my local audio shop has Rockford fosgate , Pioneer, Diamond audio, Alpine,Kenwood and bazooka subs... If you had to purchase from this shop which brand sub and amp would you purchase?

2007-03-17 15:40:28 · 6 answers · asked by Anonymous

I have two Rockford Fosgate 12" single voice coil 8 ohm subs. The continuous power is 150w for each, and the peak power is 300w for each. How do i power both of them so they'll have good bass but still sound good?

2007-03-17 15:32:35 · 4 answers · asked by Tyler F 1

Car audio system - 2 550 watt amplifiers, 2 10" subs, 2 250 watt 6x9s, 1 .5 farad capacitor, upgraded battery and alternator. After installing the capacitor according to the manufacturer's wiring diagram, I find that the car battery is draining while parked with the system turned off. The amps are powering off, the only apparent cause is the recently added capacitor. After removing the cap from the system, the battery drain appears to have stopped. Is this normal for a capacitor to drain the battery under these conditions, or could it be malfunctioning?

2007-03-17 15:24:00 · 6 answers · asked by MystWlker 1

And it´s not a common one, was digital and very discrete. Amazin piece of engineering. I would love to know which model was it

2007-03-17 12:24:00 · 2 answers · asked by VIIC 3

i am having trouble with my 1000 watt subwoffer.i am pushin it with a 550 watt amp.it was working fine but then i was bumpin it with a very very loud song.then the sub would stop and a red warning light that said terminal on the amp came on.my other speaker worked fine with it.i then plugged it up straight from my radio and it would work, but would cut the whole radio off and would come back on and do this continuissly...exactly what happens when you take a possitive and negative speaker wire and put them together

2007-03-17 11:13:42 · 2 answers · asked by grizzlymountainman33 1

I have Infinity speakers that are pretty good. Are there speakers that are better? I'm not looking for bass as much as sound clarity.

2007-03-17 10:10:39 · 7 answers · asked by Mike B 2

I have a 1980 Corvette. It had blown speakers so I took it to the Mobile Audio in town. The front dash speakers changed out just fine for something comparable. The rear speakers have proven difficult.

Mobile Audio told me that there aren't any companies that make speakers to fit old Corvettes - the magnets are too long. Right now I have the speakers in boxes in the back.

I'm thinking about just taking them out and leaving the rear speakers empty. Someone told me if it is done right, I would really only need the front speakers anyway.

Any thoughts? Where I can get speakers that will fit, or how to run the sound system to utilize just the front two and still get good sound?

I have a Pioneer deck installed, no sub or amp.

2007-03-17 09:09:12 · 7 answers · asked by Jay Bird 2

I have JL xr650-csi component woofer/tweeter. know there any woofers that are better sounding than these and are at a decent price? I'm looking for midbass heaven without a huge mounting depth or necessity for door deadening.

2007-03-17 09:02:17 · 4 answers · asked by Life Is Illusive 3

looked and looked cant find it any where could someone help me out please need to kno if it can handle a parrellel run bridged from a 4ohm dvc subwoofer at 2ohm load.

2007-03-17 08:57:53 · 2 answers · asked by jimmy_zachery 1

2007-03-17 07:27:52 · 5 answers · asked by john b 1