Car Audio

2007-03-19 23:12:28 · 4 answers · asked by dasda d 1

2007-03-19 20:28:59 · 3 answers · asked by Arsen 1

2007-03-19 19:50:13 · 6 answers · asked by subbu g 1

2007-03-19 19:15:56 · 3 answers · asked by m23#one 3

im putting 4x6 in the front and 6x9 in the back. who builds a better speaker? which one better sound quality for a good price?

2007-03-19 18:27:42 · 7 answers · asked by Anonymous

im going for a banging bass system and loudnes of course. im replacing my already worn rear deck speakers and i was wondering if i should go ahead and change the front speakers too or just leave the factory ones. im looking to minimize the buzzing and rattling you get with bass.

2007-03-19 18:16:53 · 4 answers · asked by austinbound2007 1

I hooked up 2 10" subwoofers (250 rms each) and 2 4"x10" rear speakers (150 rms each) to a 4 channel amp (75 rms per channel). It was working fine for about a week, then the rear right speaker smoked, stank, then the amp went into shut down mode. The 2 subs and the rear left all work until the amp shuts down. I have a 1.5 farad capacitor leading into the amp, and my ground is secured tightly to the frame of the car with about 8 inches of 4 g wire between the amp and the bolt holding it down. I have checked and dble checked to make sure there is no pinching of any wires, and I can't figure out what is going on. Please help if you can. Everything is rated at 4 ohms, nothing is in bridged or parallel mode. It is straight wired: 4 channels, 4 speakers.

2007-03-19 18:10:54 · 4 answers · asked by Thomas J 1

2007-03-19 17:59:20 · 2 answers · asked by bsmarr 1

ok, I am preparing to install two 18" DVC 1800watt subs and two Drive Gear 500watt 6x9 8-way speakers in my 1989 Lincoln Towncar, I am thinking of installing the subz in the trunk and the speakers in the driver/passanger door, any suggestions for better places??? My real question is what kind of amp should I get, how many watts, should i get two? And how many channels should the Amp be....And, will I need to get an extra battery or two or five or will It be all good, if so what kinda voltage battery, links are very helpfull, thanks.

2007-03-19 17:01:28 · 8 answers · asked by FavoriteTrappersFavoriteTrapper 2

I'm planning on installing the system for it in the summer, i just need to know where i can run the power wire through the firewall. Any suggestions?

2007-03-19 16:20:44 · 2 answers · asked by Anonymous

2007-03-19 15:51:13 · 1 answers · asked by Myles G 2

I need to find what FM Modulator that hooks from the changer feed wire to the radio RCA's. The radio is a Boss and the changer is a Prestige.

2007-03-19 15:39:16 · 1 answers · asked by Spring loaded horsie 5

is it possible?

2007-03-19 15:05:16 · 1 answers · asked by grizzlymountainman33 1

I'm buying a kicker comp 10" in a box this weekend but I don't have the money to puchase the amp too. Will my Blaunkput Casablanca 4x50watts cd player power the sub good until I buy an amp? Also, any suggestions on a realatively cheap amp that complements this speaker? Thanks... Also it is not a cvr... It's just a kicker comp 10. I belive it's a 300watt sub.

2007-03-19 14:41:46 · 7 answers · asked by dark_knight 1

Can someone please explain how i would install a toggle on the remote wire from my head unit to my amp somewhere in the middle so i can mount it on my dash and be able to control my amp on/off from there.

2007-03-19 13:29:08 · 6 answers · asked by codya13 3

There are 3 posts for the amp power - 12V, REM (remote) and Ground. Can I bypass the remote or somehow trick the amp to think it's on? Once it's on, can I turn it off? Would it work to put an in-line switch on the power cable? I don't want to use my car-sterio at all - it doesn't even work.

2007-03-19 13:25:09 · 5 answers · asked by Homer M 1

Just bought used 1999 Montero Sport. Any body know how to unlock the code/what is the code to unlock the stereo system.

2007-03-19 13:21:28 · 1 answers · asked by chad m 1

I had to replace the battery in the car.

2007-03-19 12:53:06 · 3 answers · asked by dconnell58 1

Heres the spot to list them..Came up on some GOOD speakers- i need a powerfull cheap amp.. us poor folk cant afford $600 amps.. something 2-channel 400+ watts RMS... any cheap?

2007-03-19 12:45:17 · 5 answers · asked by Moe D 2

So right now I have 2 sony subs being powered 50 watts each bridged to 8 ohms. I love this, just loud enough to rattle windows. But, What I want to do is use that amp (a rockford) to power my 6x9's and get a new amp that would put 125 watts per sub at 8 ohms. What the real question is, is how can I wire these subs? Do I put them each to a channel? or do i bridge the amp and then run the 2 speakers at 8 ohms? It is the same wattage and the only difference is the resistence. What should I do and why?

2007-03-19 12:16:37 · 4 answers · asked by Wastedmilkman61 3

Does anybody have a 12-Band Cobra with voice and do you like it? I just made a purchase and was wondering if it would be a good one! According to user reviews a lot of people liked them a lot and said they get very good range and give a lot in the way of advanced warning.

2007-03-19 11:49:18 · 4 answers · asked by dubsperformance 1

It is for a 98 jeep grand cherokee, and i'm not looking to spend a fortune. i just want something that isn't too complicated, but decent.

2007-03-19 10:48:22 · 4 answers · asked by hannah h 1

2007-03-19 09:41:07 · 5 answers · asked by dj j 1

2007-03-19 09:04:29 · 2 answers · asked by Anonymous

just purchased a 91 Chevy Beretta, I have done good maintenence to it, now all I need are good speakers. I have a snatch out cd player in it, but the speakers are very low and monotone, the guy who sold me the car said I should get new speakers back there. So I am looking for speakers between the price range of $60-$90 dollars, nothing with too much heavy bass but good sound quality bass and treble and something that will play loud enough for people to hear outside the car in the summer. What brand of speakers should I look for? how many watts? power? and what size? and where can I purchase them from? and how should I go about installing the speakers?

2007-03-19 08:29:50 · 6 answers · asked by GRS 1

does anyone know how to remove/install a cd changer for a 94 pontiac grand prix. I want to install it in the front in the arm rest.

2007-03-19 07:59:16 · 2 answers · asked by Mamita C 1

I was looking for somone to help me design my car audio. I have a basic design i belive, but i need help modifying it to the best i can get. I will have the names of everything in here, they can be found on Crutchfield.com under these names.
Subs - Infinity Kappa Perfect 12.1 = I want these to play 18-200
Midbass - Kicker SSMB8 - Want these in kick pannels play 180 - 500
Door Speakers - Polk Audio db6500 - High end 480- 8000 for the woofer, and then 7980 - 20k for tweets.
Back Speakers - Don't matter.

Now i need Idea's for amps and cross-overs to get for the gear above, or any other suggestions on what to get for gear.

I have the Infinity Ref. 611a for the subs.
MTX Thunder 3404 - can't be found on crutchfield - for the 2 doors and 2 back speakers

and i was thinking kicker ZX 300.1 for the midbass in the kick pannels. will this gear be able to meet my goals? or how to some of you people have your systems set up?

2007-03-19 07:49:33 · 3 answers · asked by Larry G 2

Or can i get a replacement from the store.I pretty much know what im doing, but im not an expert or anything. Is a malfunction or not? It's hooked up to 4 gauge wire and is outputing to two bazooka 10 in. subs. I had all the settings on the amp were at the lowest . I used low frequency outputs on the subs. I also double checked the ground and power input(+12v).

AMP SPECS:Power Acoustik Lx2 1000 2 channel 1000W amplifier

1000W peak output, bridged

280W RMS (continuous) x 2 @ 2 ohms


220W RMS (continuous) x 2 @ 4 ohms


560W RMS (continuous) x 1


Ask me for more information if needed

2007-03-19 06:31:46 · 8 answers · asked by pyromaniac2617 2

hi all , I have a v reg ( 2000 ) ford galaxy , which has a ford 2006r rds stereo
I have the code but cant enter it into the stereo
I have no instruction book for the stereo
I have searched / googled for help and folowed soem suggestions that i found
the most common one is to use the preset number button to enter the number , i have tried that but cant get the display off the 4 lines ( it shows CODE - - - - )
any suggestions please
thanks in advance

2007-03-19 06:30:59 · 1 answers · asked by HobsonDog 1

I put in a new battery and now the radio display to enter code

2007-03-19 05:45:05 · 1 answers · asked by z578348 1