I just bought a Kenwood car stereo. What ipod cable do I use?

Question

the model number is KDC-MP2035 and it says ipod ready. just wondering what cable to use cuz there seems to be many to choose from..which one is right for this model and will work?

Answer 1

u can use the regular ipod charger tht u use to charge the ipod on the comp

http://www.kenwoodusa.com/Dealers/Us1/flyers/Kenwood_Car_Entertainment_2007.pdf

Answer 2

If you want to use the "iPod Ready" feature of the head unit, you need Kenwood's KCA-iP500. This allows you to control the iPod with the buttons on the radio, and see the display on your radio display.

http://www.amazon.com/s/ref=nb_ss_e/103-5304509-5739807?url=search-alias%3Delectronics&field-keywords=kca-ip500&Go.x=6&Go.y=10&Go=Go

If you just want to hear the iPod audio through the stereo, you can use a simple patch cable with 3.5mm stereo mini plugs at each end. You can find these at Radio Shack or any electronics store, but you'll have to use the display and controls built into the iPod.

http://www.amazon.com/3-5mm-STEREO-M-3/dp/B0002ZPJZO

Answer 3

You can just use a double sided 3.5 mm headphone jack cable and put it in the front auxiliary of your radio...you dont need an expensive ipod interface fancy shmancy thing. It works the same!