ive installed it in my car and i got power and on my remote when i push the dvd setup button it shows me about 3 seconds of video then goes back to the blue "its unlawfull to blah blah blah blah, screen" so how do i make that go away? i heard about codes on the remote and installing a toggle switch which i would also like to know how to install... can anyone help me????
2007-03-18 05:20:09 · 5 answers · asked by M C 1 in Cars & Transportation ➔ Car Audio
ive installed it in my car and i got power and on my remote when i push the dvd setup button it shows me about 3 seconds of video then goes back to the blue "its unlawfull to blah blah blah blah, screen" so how do i make that go away? i heard about codes on the remote and installing a toggle switch which i would also like to know how to install... can anyone help me???? I also need to know what my parking break wire in my car is and looks like? i have a 2000 chrysler lhs.
2007-03-20 06:58:58 · update #1
I also need to know where my parking break wire in my car is and looks like? i have a 2000 chrysler lhs. someone please help before i loose my mind
2007-03-20 06:59:59 · update #2
In order to watch TV you must install a switch in line of the parking brake wire and the ground. If you read the manual theres a sequence.
I think you have to show ground when the units on, take it off for 3-5 seconds and then show ground constantly. The video will then play. You must do this sequence each time so its impossible to just have it grounded.
Go to Radioshack and pick up a push button with normally closed connects (N.C.) and connect one side to ground and the other side to the pink parking brake wire. After it starts up, press and hold it between 3-5 seconds then let go. The blue screen should go away after a second or two. Hope this helps. Goodluck.
Or you can connect it to the parking brake like your legally supposed to, but what's the fun in that?
If you listen to what I wrote, you'd be fine. you wouldnt even need the parking brake wire on your chrysler. Geez, cant help people anymore huh.
2007-03-18 16:11:27 · answer #1 · answered by JohnnyCat 2 · 0⤊ 0⤋
wire the parking brake wire coming from the back of the radio to any regular ground on your car. then, install a simple on/off toggle switch in that wire. this will allow you to turn the video off when, or if, a cop pulls you over.
2007-03-18 06:02:24 · answer #2 · answered by yitzac1990 3 · 0⤊ 0⤋
all u have to do is find the wire running to ur parking brake. then splice into it and run a wire to a ground now u have video anytime u want. good luck!!!!!!!!! that is what i did on my kenwood.
2007-03-19 13:12:41 · answer #3 · answered by Living the Life 3 · 0⤊ 0⤋
you need to run a ground fault switch this willtrick the dvd into thinking you have but on the emergency break it should work
2007-03-22 20:32:12 · answer #4 · answered by Keith R 1 · 0⤊ 0⤋
in case you floor it to the body with out having a hidden swap to make demonstrate screen flow blue you receives a fee ticket from a copso throw a swap below your sprint to hit make the demonstrate screen flow blue once you get pulled over
2016-11-26 20:32:24 · answer #5 · answered by llerena 4 · 0⤊ 0⤋