Do It Yourself (DIY) - December 2007

is wobbly...any way to fix this? I took the screw out of the chuck but can't seem to get the chuck to come loose. Any help would be greatly appreciated. Thanks.

2007-12-16 15:34:15 · 2 answers · asked by jemrx2 4

so Im replacing my bathroom vanity , and the pipe from the wall is stuck , there is a plastic drain pipe coming from wall and attached to the drain the pipe is another plastic pipe that was connected to the drain , it has a threat on it , but cant remove it with my metal wrench , helppp i dont want to break any pipes so any help would be great...

2007-12-16 15:24:48 · 5 answers · asked by Anonymous

i have a glass computer table it is 1/2cm thick, i was wondering if i can put a 10 gal fish tank on the table w/water in it... i think 1gal= 10pounds so 10 gal is 100 lb right?

2007-12-16 14:34:39 · 3 answers · asked by ApWolfFox 3

I have few question regarding nails cause I am renovating my father's old house and makin it ready to live in....

1. How do I remove nails from wood ( please tell me the best way)?

2. What are all the tools that I can use with nails???

3. Any tips....

Thank You...

2007-12-16 14:14:45 · 4 answers · asked by DisturbedRocks 3

2007-12-16 13:35:04 · 6 answers · asked by Anonymous

For example, it is house, that has been covered with faxe boards but I am pretty sure asbestos is behind it, there is no insulation. I have read up on the Victorian Australian Guidelines for dealing with it, is it worth removing it or just putting insulation inbetween the vinal boards and the cement sheet?

2007-12-16 13:30:19 · 3 answers · asked by Abbasangel 5

Years ago my neighbour had outdoor Christmas lights with an adaptor that plugged into the bayonet fitting on his porch light.

Basically, instead of training cable from outdoors to indoors, he removed the bulb on his porch light and plugged in the lights.

The lights were string variety...

Does anyone know of this adaptor or plug that I can attach to outdoor lights?

Oh and before anyone says.."Ask the neighbour...he moved!

2007-12-16 13:30:06 · 6 answers · asked by audrey_o 5

My grandma says that with rocks in it, it wont smell and it will never fill up and my grandpa says that if you dont put any rocks in, it wont smell and it wont fill up whos right and whos wrong?

2007-12-16 13:18:23 · 9 answers · asked by Yayaitta 1

I'm doing a project in which I will need a pvc pipe of 2" in diameter. However, I need to modify that pipe to make it wider because that specific pipe in that diameter is not sold. So I need to find a way to shave off plastic from the pipe that I have now. Any suggestions?

2007-12-16 13:00:49 · 6 answers · asked by Anonymous

I read in a recent Popular Science magazine that you can unseal an envelope in the freezer, but I don't recall how long it would take for it to pop back open. Anyone know the time it would take?

2007-12-16 12:46:12 · 2 answers · asked by Anonymous

I just bought a Poland Wild Thing chainsaw...Its been sitting on a shelf for three years..I drained the gas out,put in fresh gas..The saw will run and idle fine but,when i pull the trigger,it bogs down and cuts off,like its getting too much gas or, not enough gas..It idles too good i might add,making me believe its not getting enough gas..Any advise would be very helpfull..Thanks

2007-12-16 11:37:16 · 2 answers · asked by Tony M 1

2007-12-16 11:27:59 · 6 answers · asked by Anonymous

2007-12-16 11:25:09 · 13 answers · asked by chris p 3

For my English project, which is tomorrow!

I can't just throw some sheets together, it's like a costume costume.

I procrastinated and yeah now I don't know what to do.

I'm afraid if I cut too much fabric it won't be long and flowy.

But I have to cut it eventually, I'm just worried.

I didn't buy a pattern like an idiot and now it's too late.

I have a sewing machine and everything. I know how to hem it.

It doesn't have to be perfect but I just don't know where to begin.

What do I do?

2007-12-16 11:00:33 · 2 answers · asked by ? 3

Hi, my les paul's neck is starting to bend because of the tension of the heavy gauge strings I put on it a long time ago (without setting it up first). What is this called: a bent neck? a warped neck? or a twisted neck? BTW, can this be fixed? is this a serious matter?

2007-12-16 10:28:36 · 4 answers · asked by jack b 1

2007-12-16 10:23:26 · 10 answers · asked by Wendy B 1

Has anyone used the aluminum monopole flagpoles for wind turbines? I am looking at one for 45' and is rated for 107 mph winds. However, I don't know how this would work with a wind turbine.

2007-12-16 09:31:12 · 3 answers · asked by J S 2

I'm looking for information on buying solid brass snaps for a leather belt. Also a kit for attaching them. I've seen some on line but I haven't found exactly what I need. Which is bigger a line 24 or line 20 snap and what diameter are they? Any links to sites that sell these would be a big help.

2007-12-16 09:17:23 · 3 answers · asked by Barry DaLive 5

I have Poulan Pro model PP8527ESB with Tecumseh engine. Engine starts but quits if the fuel tank cap is on and only works without fuel cap. I changed sparkplug and oil and put in new gas.

2007-12-16 08:55:53 · 3 answers · asked by Arkadiy K 1

wallpaper? My husband insists it goes in the bathroom ... i wouldprefer a semi gloss paint but after stripping and taking down the old paper he says it is too much work to sand the flaws in the wall for painitng purposes and that wallpaper will cover it up easier

2007-12-16 08:35:33 · 4 answers · asked by cristelle R 6

I need a husband to help me assemble this desk I bought from China. Of course, he has to be cute and smart also. But in the meantime these instructions are making no sense! So, desk parts are laying around all over the floor.

2007-12-16 08:32:18 · 6 answers · asked by Emme 3

2007-12-16 07:43:34 · 17 answers · asked by bfine107 2

cant see any of the four corners. box only scooted sideways, to the left as can only see right sideline of box. thank you

2007-12-16 07:30:33 · 3 answers · asked by doris b 1

to a 100 amp breaker box and how much dose it cost. IM just going to change the fuse box to the breaker box not replaceing any wires.what actions do I need to put in place before getting started.

2007-12-16 06:57:30 · 9 answers · asked by country boy 4

I have twisted forks, strangely wound pieces of wire, and I've taped a lot of things (or used rubber bands on them or electrical tape) and have lots of super glue, and lightbulbs on covered wires, drain cleaners (wires) I've fashioned, and stuff from restringing lamps, skate keys, magnets from shower curtains, bunch of old keys, cotton meat wrapping thread, melted candles, bent tacks, pieces of dowels and pvc pipe, etc.

2007-12-16 06:55:08 · 6 answers · asked by sophieb 7

i need to build a frame that needs to be 8 feet tall 12 feet wide and 22 feet long.... so 8x12x22... it only needs to be able to stand up for about 9 days and will have no stress on it besides the tarps used for walls.... so my question is, what material would be the best and/or cheapest way to build something like this....

2007-12-16 06:27:18 · 5 answers · asked by import guy 4

You can only use it to sand straight edges for Woodwork

Thanks
x

2007-12-16 06:08:44 · 7 answers · asked by DK :) 2

I got all the gas connections and ready for hookup. I need to tell my Gas Plumber what the CFH requirements.???

2007-12-16 04:46:03 · 2 answers · asked by honker 4

Can it be done? One exterior pane is cracked due to sloppy painter. Can it be replaced opr does it require a complete window replacement?

2007-12-16 04:09:21 · 1 answers · asked by Landlord 91335 3

how do i make a antenna for a home scanner ex fire, weather

what will make it work best

2007-12-16 04:08:09 · 3 answers · asked by Anonymous