Motorcycles - January 2007

I have the serial number.

2007-01-20 09:44:15 · 2 answers · asked by Dan B 1

I have found the adjuster that balances the left-hand pair of carbs with the right-hand pair, but I cannot locate any adjusters that balance the carbs within each pair. Similarly do you know what the needle heights should be set to?

Thank you for any advice that you can give.

2007-01-20 08:45:57 · 5 answers · asked by ? 3

2007-01-20 05:55:44 · 3 answers · asked by Brian S 2

I am a mature adult with 30 years of riding experience. I will be using the bike primarily for daily commute to work, about 12 miles . On weekends my wife will ocassionally ride with me, so passenger comfort and cruising ability are a consideration. I like fast bikes I currently have a Kawasaki ZRX1200-R.

2007-01-20 05:43:01 · 9 answers · asked by Anonymous

2007-01-20 05:14:47 · 2 answers · asked by Anonymous

2007-01-20 05:12:21 · 1 answers · asked by samiam677 1

The readout comes on when you start the bike but as your riding it never changes from zero.
Anybody have insight on the technical fix?

2007-01-20 04:55:18 · 3 answers · asked by samiam677 1

id like to get a Shoei helmet but they are so expensive. does anyone have any experience with ICON helmets? Or even jackets? im also looking at the ICON Motorhead jacket. Its between the ICON jacket and a Joe Rocket blaster 3.0. THe blaster looks like it would be so cool in the heat. Im also looking at the ICON Perimiter helmet and the Shoei TZ-R. Thanks for any opinions.

2007-01-20 04:39:32 · 4 answers · asked by Anonymous

2007-01-20 03:50:33 · 3 answers · asked by david w 1

2007-01-19 23:59:37 · 3 answers · asked by ASHISH R 1

2007-01-19 23:59:33 · 13 answers · asked by ronderouin 1

a kx500 or one of the newer 450f's. I would want the kx500 because of the massive horsepower.

2007-01-19 18:59:10 · 4 answers · asked by Anonymous

where can i find a serice manual online, the piston cup will not move back in. the parking brake is still on the bike (no removal kit).
i need to know if this affects the piston cup from coming fully back .

2007-01-19 18:43:25 · 1 answers · asked by rustybongwater 2

Is this bike a reliable and safe machine?Please tell me the disadvantages to this bike as well as the advantages. What should I look out for in a second hand machine which may spell trouble for me. Also is a particular year better than another? I can't afford the latest model so will be getting something probably a couple of years old. I am not mechanically minded or gifted so want something virtually trouble free except for the usual maintenance things. Is this bike a good choice for a beginner and novice. Your answers will be well read. Many thanks in advance. I look forward to your replies asap.

2007-01-19 18:10:52 · 8 answers · asked by Anonymous

set the same or different for idle. so it gives it that mean sound it's a 93 polaris

2007-01-19 15:45:12 · 3 answers · asked by Anonymous

it is one really nice bike, i dont think occ did it

2007-01-19 14:06:41 · 4 answers · asked by robert m 2

2007-01-19 13:37:07 · 5 answers · asked by topher7181 1

Bike has sat for many years after starting oil is dripping from behind the sprocket is the seal easy to remove should I change
other seals while in there. does someone have a picture of the parts that I have to remove is there a bearing that might be siezed behind the seal

2007-01-19 12:35:12 · 3 answers · asked by Anonymous

2007-01-19 12:34:57 · 7 answers · asked by rattlesnake 1

my 1976 husqvarna 125 cr gp bike makes a sort of loud clattering noise all the time the motor has good compression and it usually starts on the first or second kick when cold but once it is warmed up it starts right on the first kick. the bike runs great i am jus kinda worried about this noise what is it?

2007-01-19 10:07:20 · 5 answers · asked by dirtbike dude 1

this seem completely pointless. what is the purpose of having a 1-N-2-3-4-5-6 gearbox? why not have N first, then 1-2-3 etc?

2007-01-19 09:31:32 · 10 answers · asked by Anonymous

on every motorcycle, the sprocket connecting to the crankshaft of the engine is small and the rear cog is large. whereas on a normal bike, if you use that same combo, then you go 4mph.

why is this? does it have something to do with the transmission? would you go faster on a motorcycle if you reversed the sprocket size and set it up like pedal bike?

serious answers please, im baffled and this is going to bother me until i get an answer.

2007-01-19 08:53:57 · 7 answers · asked by Anonymous

2007-01-19 08:13:29 · 11 answers · asked by mark v 1

I have an 01 Honda CBR 600 F4i. I bought two Blue Polarg H7 ION bulbs. It says its 35w but I thought the wattage had to be 55w. Will I be able to see with these bulbs? Has anyone ever bought polarg bulbs before?

2007-01-19 08:09:18 · 5 answers · asked by OH yea! 1

ok so here is my question ..i ride a 2000 ninja zx7r and i do alot of stunts on it ...and the last ride i went on ...it strated to my a nocking sound in the motor i would think..doz anybody no would might of happen and the cost it will take to get it running good .. it only has 18,000 miles on it.... please let me know

2007-01-19 06:55:21 · 5 answers · asked by slappy dangler 1

imlooking to buy a 2003 model kawaski valcon with 1400 mies on it iwant to know how much it worth

2007-01-19 06:32:56 · 6 answers · asked by Anonymous

I'm about to buy a 2000 Yamaha Blaster for $600.00
It needs two things, new top end and center case gasket.
The piston only gets 100psi, and it needs me.
How many hours do you think it will take to do these two things?
and if ANYONE is willing to help, I have other qestions you can IM me, mikeaj92 in yahoo.
But doing these two things; is the work easy, just a long time?

2007-01-19 06:10:22 · 4 answers · asked by Anonymous

petrol consumption of the bike, and the Exact performance on the road compared to other Pulsar DTS-i digital

2007-01-19 05:34:10 · 5 answers · asked by subash v 1

i have a Honda CM125 four stroke with CDI.

the bike was having trouble starting-just clicked under the seat and didn't crank- but bump started fine.
i put WD40 on the contacts- ran perfectly.

10miles in it stopped.

it wouldn't bump start.lights ect. work, KILL switch is on RUN, fresh fuel, checked contacts, fuel lines ect....NO STARTER.

it cranks but won't fire.

but the spark plugs fires-weakly.not nice and fat and blue.

i replaced the spark plug and battery-no difference.

im pretty certain its electrical-but what is it?

2007-01-19 04:52:33 · 11 answers · asked by ribena_wrath 3

I ride my Ninja motorcycle in sub-zero temps all the time, and currently use a group of thermal, leather, and armored gloves. Now I am looking for something that can sustain 50mph or higher wind and still keep me warm. Any fellow bikers know of some good gloves?

2007-01-19 04:31:48 · 15 answers · asked by Anonymous