I have found the adjuster that balances the left-hand pair of carbs with the right-hand pair, but I cannot locate any adjusters that balance the carbs within each pair. Similarly do you know what the needle heights should be set to?
Thank you for any advice that you can give.
2007-01-20 08:45:57 · 5 answers · asked by ? 3 in Cars & Transportation ➔ Motorcycles
you will need a set of 4 vacuum gauges, connect one to each of the carbs /injectors vacuum take off points. run engine to normal operating temp. on my Suzuki balance 1& 2 together and then 3&4.you can the balace 1/2 to 3/4, on the triumph 1 was fixed and you balanced 2& 3to it. Adjusters are usually by way of a nut and screw on the top of 2,3and4s carbs
2007-01-20 09:02:15 · answer #1 · answered by motomarco9999 2 · 0⤊ 0⤋
This is called synchronizing the carbs...any motorcycle shop has the vacuum gauges to do this, and they usually charge anywhere from 50-150 dollars to sync em up...
2007-01-20 15:29:11 · answer #2 · answered by Mark D 3 · 0⤊ 0⤋
It's a pain in the neck - take it to Honda - you really need the vacuum gauges to do it properly!
Takes about 20 mins to do -
2007-01-20 08:55:03 · answer #3 · answered by jamand 7 · 0⤊ 0⤋
Not the answer you want but easy when you know how!
Requires some skill and prior experience
Good Luck
2007-01-20 11:24:47 · answer #4 · answered by gsf1200 5 · 0⤊ 0⤋
Your best bet is to buy a Haynes manual for your bike as it tells you in detail, with pictures, on how to do it.
2007-01-21 04:48:42 · answer #5 · answered by Bandit600 5 · 0⤊ 0⤋