Pontiac

2006-07-29 10:11:33 · 11 answers · asked by Lexi 2

the engine is new.bored .030..stock cam.ran good,but overheated immediately.only 60 70 mph travelling on highway kept temp at bay around 210 degrees.at first,i thought the 4 blade fan and 2 core factory radiator were not enough.the engine i had put around 100 miles on so far,ran great.but was driving it a few days ago.it bent a pushrod on number 4 cylinder.i changed that.adjusted the rocker with car running.backed off till it clattered.tightened back down 1/2 turn.now engine runs all crazy.it runs like several plug wires are switched around and still overheats badly.all wires are on right.tdc rotor is pointing to number one.so timing is correct. i want to go through entire valve adjusting procedure.i'm thinking engine builder tightened them all to tight.perhaps this causes the overheating.but.i cannot find anywhere on this big internet.a picture of which rocker arms are exhaust or intake.i see many places telling which to adjust but no one telling which is exh. or intake.help please.

2006-07-28 20:33:18 · 4 answers · asked by shelby m 1

I have changed the spark plugs and the fuel pump/filter. It only jerks until I get to about 50 mph, then it runs fine.

2006-07-28 16:04:46 · 10 answers · asked by Leo 1

2006-07-28 02:58:14 · 5 answers · asked by adisch15 1

2006-07-27 13:18:17 · 2 answers · asked by mybarbiesrule 1

2006-07-27 07:24:31 · 9 answers · asked by Anonymous

2006-07-26 14:46:15 · 7 answers · asked by Anonymous

used.... average miles, average car , average color..

2006-07-26 14:38:16 · 3 answers · asked by Anonymous

Japanese hubby is crazy about American cars and especially obsessed with the Pontiac Firebird and its bird logo.

Any good or bad tips about the brand in general?

2006-07-26 11:56:35 · 24 answers · asked by blubber 2

When I close it, it hangs slightly below roof. About 1/4 inch. It is Power glass with sunshade. Factory installed.

2006-07-26 09:43:01 · 3 answers · asked by Patti S 1

2006-07-26 04:47:40 · 18 answers · asked by Anonymous

I have had the heads done at a machine shop I have replaced all gaskets and I am still getting bubbles out the overflow and loosing all coolant ??

2006-07-26 01:42:24 · 5 answers · asked by Anonymous

I have a Formula 400, I have the original stock motor and transmision, but are not installed, because I put in a LT1 from a model 93, with manual trasnmision, rear disc brakes. It is working with computer and accesories.

One more time, how much do you wanna a pay.

Contact me at jrguerreroc@yahoo.com

2006-07-25 06:43:05 · 7 answers · asked by Ralph's Firebird 1

I have an 88 Grand Prix with a 2.8 I was wondering how I could boost the horsepower a little without any expensive gagets

2006-07-25 05:18:29 · 3 answers · asked by ? 2

I looked at the car today and that price sounded too cheap for that model of car. What do you think?

2006-07-24 15:12:10 · 20 answers · asked by Anonymous

2006-07-24 11:59:02 · 5 answers · asked by therealhumantorch 3

i'm ready and i know which one i'm getting...just want to read other answers....

2006-07-24 10:21:58 · 10 answers · asked by the equinox 2

I really want to know if the Pontiac gto can enter in canada, because i really want a GTO like this

2006-07-24 05:04:36 · 2 answers · asked by Muscle Car Lover 2

So if anyone with a muscle car has used the mufflers give me your opinion.

2006-07-23 05:22:15 · 2 answers · asked by tjoe1980 2

my car started acting up, first the battery light came on, then the ABS, brake, etc. The wipers went slow, windows slow. I thought it was the battery and i got a new one. The battery light came on again after i installed the new battery. I drove home, the abs light came on and then just when i reached home, the lights on the dash board started getting dimmer and he car finally died. Is it the alternator? and do you think the alternator drained my entire new batter? cause the car wont start up again. I wanna return the new battery if its the alternator at fault and how do i start it in the morning. Please help.

2006-07-22 14:08:37 · 15 answers · asked by noms 3

i need a picture of the frontal brake assembly

2006-07-22 09:19:44 · 4 answers · asked by tayler_07 2

2006-07-22 01:52:11 · 7 answers · asked by dustin s 1

It will not drive well at all...it sounds like it is coming from the top of the engine but not sure....i can't take it to the mechanic b/c i can't drive it...when you start it up...it goes clank clank clank clank clank....help! anyone know anything about cars?

2006-07-21 05:38:08 · 8 answers · asked by April W 2

My friend drives an 01 Mustang GT and wants to race this guys 01 WS6(at the track). His mustang just has exhaust and intake and the T/A is stock. I have nothing against mustangs but the T/A is a faster car period and he is wanting to place money down that his GT is faster. Any way to convince him not to lose his money?? Both drivers are pretty good.

2006-07-20 18:02:41 · 6 answers · asked by hairypussy 1

It has everything but leather.........I'm looking to buy it not sell it.........If that changes your answer at all.

2006-07-20 14:53:23 · 5 answers · asked by banker3d 2

2006-07-20 02:11:12 · 7 answers · asked by barb h 1

Performance parts, as well as body kits and other accessories. Its a 98 grand am SE, I-4.

2006-07-18 22:43:50 · 5 answers · asked by Anonymous

2006-07-18 15:44:00 · 5 answers · asked by doublej6977 1

has anyone had trouble with their 1999 Grand Am over heating?

2006-07-18 15:15:26 · 7 answers · asked by Angel Lily 3

Supercharger,Chip,Exhaust,Breaks! What are the best products out there? ProCharger seems to be the best and Borla has a nice rumble, looking for a loud old muscle car exhaust

2006-07-18 06:42:30 · 2 answers · asked by Anonymous