I believe there's a bolt down at the base of the front of the seat. Maybe not, it's been a while. If there's no bolt, there's a bracket that the seat frame hooks to. Push back firmly on the seat cushion, then up. Your seat should come free!
2006-07-24 12:04:15
·
answer #1
·
answered by InjunRAIV 6
·
1⤊
0⤋
There should be two or three bolts between the rear seat cushion and seat back. Remove the bolts and pull the seat back down and out. Reverse procedure to install. Hope this helps.
2006-07-24 20:52:43
·
answer #2
·
answered by Anonymous
·
0⤊
0⤋
the seat is just clipped in,so push at the base of each side of the bench cushion at approx. center of the hump and the outer body and once you feel it give push up,this should release the bench part of it,then the back rest bolts will be visible. After the bolts are out push the backrest up....voila
2006-07-24 22:29:24
·
answer #3
·
answered by Anonymous
·
0⤊
0⤋
Place your knee in the middle of the seat. Push down and back with force and it'll pop right out.
2006-07-26 17:44:20
·
answer #4
·
answered by furball17 2
·
0⤊
0⤋
between the buckets seats forward
2006-07-24 19:09:19
·
answer #5
·
answered by infoman89032 6
·
0⤊
0⤋