Nissan

What do u guys think , is it a good deal? An sr20det into a nissan hardbody for 3,500 installed?

2007-04-28 18:27:49 · 5 answers · asked by JOMO 1

I wanted to know if anybody knew of a site where I can get a digital dash kit for my '98 Nissan Maxima.

2007-04-28 02:10:37 · 2 answers · asked by Sherick W 1

My son and I have a difference of opinion that we need help on: First, he is concerned that leaving the car overnight on an incline with the parking brake on will be damaging to the brakes. Second, he feels that leaving it in gear on the incline overnight also will damage the car. I don't understand why either situation would be a problem. Also, the manual says something about depressing the brake pedal with the engine off OR if the fluid is low, it will decrease the stopping distance. I certainly understand the flud low part but not the brake pedal with the engine off - can someone enlighten us?

2007-04-27 16:08:56 · 3 answers · asked by garryhurlbut 1

Both fans are not working, my engine is overheating, I have checked the fuses but not the relay, please help with this problem

2007-04-26 22:39:43 · 2 answers · asked by yoaopessoa 1

2007-04-26 10:16:49 · 2 answers · asked by Ray M 1

I just bought an '06 Nissan Altima and I'd like to put a plate on the front of the vehicle, not a license plate, but just a plate with my school name on it. However, the front bumper does not have any holes drilled. There are indintions where holes (could) be... is there any way to attach a plate here? Hopefully a way that doesnt need me to be drilling any kind of holes....??
Thanks in advance

2007-04-26 10:08:05 · 2 answers · asked by am 1

Hi, the 2 elec. mounts on my Murano are making noises when I either put it in gear or turn off the ignition... Is this dangerous for my computer if I don't change the parts? The dealership is asking $1500 CAD to replace the parts and labor. (My warranty unfortunately is not coverring) They also said they could simply disable the mounts but the check engine light would always be on.. How would they do this? Can I do This?

Can someone help!?

2007-04-26 10:07:42 · 4 answers · asked by Anonymous

have a bad camchain rattle have replaced tensioner,camchain,new inlet camshaft,all new lifters still got rattle any ideas are appreciated .When canged tensioner rattle wasnt there on start up left running for awile all was good turned it of went up and crowed how good i was started it up and the rattle was there again worse than ever gggggrrrrrrrr

2007-04-25 23:22:43 · 2 answers · asked by Anonymous

Trying to remove the 4Cyl 2.4L KA24E Engine from the Nissan Pickup is very, very hard. It's a 1992.

Unbolted the Transmission from behind the engine. Removed the Starter, Unbolted the Motor Mounts.

The Oil Pan didn't want to clear the Front Axle, but we managed to jack it up onto the top of the Axle so it's riding it now.

But now the Engine is wedged. It won't pop out of there!

The Transmission and Engine appear to be uncoupled. You can see the Flywheel.

Should we shove the Engine back down and pull the Oil Pan off?

Dammit Nissan! This is not being friendly at all.

Any ideas?

2007-04-25 17:04:14 · 5 answers · asked by Anonymous

is there any car besides the g35 that is similar to the 350z?

2007-04-25 13:20:16 · 6 answers · asked by hannahxjordon 1

I need the layout of the electical diagram for my car.Thank to anyone who can help.

2007-04-25 12:05:41 · 1 answers · asked by missjohnnie1 1

ok i have a 1991 nissan 240sx se, coupe, with an auto tranny, and with a ka24de(engine). how do i know if my car has an lsd? oh and it has a chuki front end (if that matters). please don't tell me to try a burn out or "drift it" i would like to know wit out shredding tires.

2007-04-25 06:02:04 · 5 answers · asked by Anonymous

some I have seen tops out at 315km or 250 km but all does are tuned. I want to know for a stock skyline, if you find a web site that shows, tell me.

2007-04-24 19:15:23 · 2 answers · asked by jack t 1

i like cars that can drifts.

2007-04-24 15:58:43 · 8 answers · asked by liemtdo 1

2007-04-24 09:11:49 · 13 answers · asked by ysh 1

the dash light get briter when i step on the break and blink when i have the blinker on when lights are on and i aply the breaks it will stallout ive clean all of my grounding piont what else is thier to do

2007-04-24 09:08:55 · 4 answers · asked by Anonymous

We owned a 2004 LE Crew Cab Off Road but it was destroyed in a tornado in KY in 2006 not far from the KY, Tennesee border.
Anyway, we are getting a new one this spring. I said it was crushed but only the nose and you could still tell it was a Titan. It was silver with towing mirrors. It was towing our 36 ft camper to Florida for Spring Break.

2007-04-24 06:49:57 · 9 answers · asked by AB 3

I think it may be a switch cause when it is on it is very cold.

2007-04-24 02:43:24 · 5 answers · asked by Anonymous

2007-04-24 02:21:31 · 3 answers · asked by Anonymous

2007-04-23 19:14:41 · 10 answers · asked by shawn_willims 1

I have not modified my car any. I have the V6, 250 HP. I would like to add about 30-50 more horsepower.

2007-04-23 18:56:10 · 10 answers · asked by m&tstidd 1

Clutch became spongy yesterday, and this morning clutch would not come back up. Towed to dealer. Dealer says line is leaking (reservoir for clutch is empty). He says most likely the Slave Cylinder was damaged by running with reservoir empty. Any way to verify this before shelling out $500 to the dealer?

Would it make sense to suggest the dealer replace the leaky lines, then test the car? Would it really cost that much more to replace the Slave Cylinder AFTER testdriving the car??
Thanks.

2007-04-23 10:25:54 · 3 answers · asked by Dave 1

The repair manual doesn't say anything about them for my '95 Nissan Maxima, but want to replace everything I should replace when I get my shocks done. Is it also necessary to install cam bolts to do an alignment afterward? Is my car even equipped with lower insulators? Answer only what you can. Thanks.

2007-04-23 10:01:09 · 5 answers · asked by Sexy Ray 3

2007-04-23 02:45:01 · 3 answers · asked by mastermind 2

I have the SOHC VG30e engine,with new water pump,timing belt and injectors and Warspeed Y-pipe. I like the old girl but at 150k miles on her and only 165 HP, she is very tame by todays standards. Nissan Quest 3.3 Liter motor sounds attractive swap. Is it worth the work? What is required? How much HP?

2007-04-22 17:29:08 · 4 answers · asked by physic guy 2

Checked belts and they are not loose, could they be too tight?

2007-04-22 10:45:31 · 8 answers · asked by Princess 1

i need to get the windshield and hatch window sealed and its ovver $90 each for the nissan ones. i want to find one that ill work for under $100 together, im not concerned about keeping the chrome molding if theres an option

2007-04-22 08:54:04 · 4 answers · asked by Adam N 1

I am about to purchase a 2003 Nissan Maxima. Being that it is a performance car, that is supposed to run on premium fuel, are its parts also performance level parts that are expensive to buy in case their ever was a problem?
I will have my mechanic check the car out but I want other input too.

2007-04-22 08:36:55 · 7 answers · asked by Anonymous

2007-04-22 03:16:33 · 1 answers · asked by gabriel_renante 1

2007-04-22 02:10:06 · 11 answers · asked by sweetheart 1