Ford

so i'm thinking of buying a 2007 ford escape hybrid.
i know dford has a bad rep for quality and stuff liek that
but can someone tell me what some of the good things of this car are, and the negatives.

also if you own one, hybrid or not, if you liek it or have had any problems with it.

2007-07-31 11:42:02 · 7 answers · asked by qwerty!333 3

What causes severe road noise with my 2003 Mustang GT? Is it tires, wheel bearings, or something else.

2007-07-31 11:26:13 · 7 answers · asked by music man 1

im hooking up the juice box device for better performace

2007-07-31 10:44:04 · 3 answers · asked by gilbertwatson2002 1

2007-07-31 09:42:04 · 5 answers · asked by gigi 1

2007-07-30 17:23:33 · 16 answers · asked by Pablo G 3

i want to know what kind of header are loud and what kind of exhaust its good and all that good stuff on the engine like the manifold intake and all that juice

2007-07-30 16:35:08 · 16 answers · asked by Anonymous

Is this true, I have taken it to a couple of mechanics and the all tell me that my bolts are striped. and that it would cost me $400 to replace another. I spend so much money on people trying to open it, but it does not even need be be open, i will just replace it when it gets 100,000 miles.

2007-07-30 16:30:59 · 9 answers · asked by bodybuilder 1

We bought a Mustang but the man who had it before us took the engine out and took it apart and never got around to putting it back together. Is there a guide we can use online to put it back together and put it back in?

2007-07-30 15:51:34 · 9 answers · asked by Tom 4

I'm gonna be putting a 3" body lift on my 2000 Ford Ranger XLT.

I don't know much about tires, but I'm thinking of 31-32" tires. Would I be able to use the same wheels I have? Can anyone link me to some specific tires that they have or think would look good? I will NOT be offroading at all, so no need for super swampers or anything like that.

Please don't answers if you're just going to link me to tirerack.com or something lke that.

2007-07-30 15:41:22 · 6 answers · asked by robertplantissexy 1

2007-07-30 15:12:29 · 23 answers · asked by lilly101200 2

I just took my truck in for an oil change at Jiffy Lube. The "mechanic" there told me I had carbon build up on my air filter and I needed a tranny flush as well as a fuel injector flush also consisting of adding a fuel additive as well as an additive to the oil. Now correct me if I am wrong...but what does the air filter have to do with the fuel injector?

2007-07-30 09:17:23 · 9 answers · asked by akitamommy2 3

2007-07-30 06:41:25 · 1 answers · asked by bk 1

I bought a 1987 Ranger Pickup with a 2.3L 4 banger. Has leaky rear main seal and very low compression. I bought a used 1992 Ranger 2.3L 4 cylinder. My intention was to strip the head and all the coilpac ignition and use the short block to replace my VERY leaky 1987 2.3. A friend of mine said, "Why don't you use the '92 engine as is. Run it with 4 plugs and leave the other ones alone. Remove the coilpac ignition and stick your old distributor in the hole where the dist is supposed to go and use your old coil. The oilpump is driven off the balance shaft and pump is still there." This is quite the idea...but...will it work? Has anyone out there tried it?
If this won't work and I have to strip the new ('92) block will I have to use new head bolts. The modified mini racecar drivers at our local dirt track say I can use the old bolts...but they have trouble with head gaskets sometimes. I won't be running that fast or furious. Any help?

2007-07-30 02:04:20 · 3 answers · asked by Anonymous

why on fords and mazdas do you have to push the little button on the steering column before you can fully turn the ignition key to off position and remove the key?

2007-07-29 19:59:53 · 10 answers · asked by norbert 1

2007-07-29 19:16:28 · 7 answers · asked by Anonymous

The '87 Ford was a 302 efi.

2007-07-29 17:10:25 · 6 answers · asked by It's Ms. Fusion if you're Nasty! 7

2007-07-29 15:31:54 · 3 answers · asked by reedtexass 3

I've had a lot of old fords but most were 1/4 or half tons. This one has a '79 body on it and the previous owner wasn't sure if it was a 3/4 or 1 ton chassis.. It has 8 lug rims. I'm wondering if its a dana 60?

2007-07-29 14:39:05 · 2 answers · asked by beakersafreak 2

There are two plastic plugs on the back of the case. both near the bottom. Both on the rear of the vehicle one near the output driveline to the rear, and one just behind and under the front driveline. About 1" plastic hex heads.

2007-07-29 12:52:33 · 1 answers · asked by Dick N 2

I have looked to see if there have been any recalls for this problem but have not seen any listed.
My daughter in law has the same car one year newer and her's does the same thing.
Anyone else out there having this problem??

2007-07-29 12:48:30 · 5 answers · asked by REGINA F 1

I removed the safety clips on each end but it still will not come off. I note that it has a ridge on each end. Is there a special tool for this?

2007-07-29 10:47:35 · 5 answers · asked by Keith 2

then the centrel locking goes crazy.


Can anyone help?

2007-07-29 06:59:03 · 2 answers · asked by philipcunningham2003 2

2007-07-29 06:56:40 · 2 answers · asked by Anonymous

http://review-about.blogspot.com/2007/07/2007-ford-edge.html

2007-07-29 06:47:02 · 3 answers · asked by Anonymous

suggestions on anything, performance mods, visual, interior etc.

2007-07-28 22:05:25 · 10 answers · asked by Anonymous

I have a 65 Stang, and I took it down to a family friend who races and works on old Mustangs. He said that my front end is shot, and I need all new bushings. I have alot of extra money, so if I wanted to upgrade the suspension, what should I do? Should I put in a Mustang II front suspension, I've always been told that they were the best of the classics. Any help/opinions would be great.

2007-07-28 20:58:17 · 10 answers · asked by GalacticaCag 2

2007-07-28 20:20:35 · 12 answers · asked by vlietjc 1

i want to sell it on ebay separeatley in parts. the doors with the stuff in them. its all original. not exactly show car condition but it is all original. the doors have slight rust on them. the power steering pump is gone. i was just looking to see how much it would be worth.

2007-07-28 17:35:47 · 6 answers · asked by MKenzi C 2

Is a ford focus a good car? Im 16 and im looking at a cheap car to get me from point a to b. any suggestions? Thanks.

2007-07-28 16:11:02 · 7 answers · asked by DillonH 3

and 1990 Ford Econoline vans with 351 CID engines? Thank you.

2007-07-28 13:48:05 · 4 answers · asked by lrsepulvado 2