Ford

2007-08-11 14:52:50 · 8 answers · asked by felicia h 1

1993 ford taurus,4 door ,3.0 engine

2007-08-11 10:56:00 · 5 answers · asked by cmy4wd 1

Thinking of buying a new or couple years old Ford Ranger. I'm looking for 4 liter 6 cylinder or 4 cylinder 2.3 - two wheel drive. Any pros and cons on this if you have one. Also any major problems to consider or look out for. I have a very very old Toyota and don't know much about the newer American trucks.
Thanks.

2007-08-11 09:40:17 · 13 answers · asked by SusieDarling 2

2007-08-11 07:56:28 · 2 answers · asked by Anonymous

it stops have to let set to regain its self then it fires up and runs again for awile then it does it again like its not getting fire or fuel What Now?

2007-08-11 07:23:57 · 5 answers · asked by gizmo10_1 1

all overheating problems that could be thought of have been checked.

2007-08-11 04:00:17 · 9 answers · asked by gizmo10_1 1

or something?Good Deal or probably a lemon?

2007-08-10 18:06:38 · 7 answers · asked by jordynorr 1

i want to get alot more horse power i have no idea about ford engines any help

2007-08-10 16:46:42 · 10 answers · asked by Anonymous

2007-08-10 16:14:00 · 5 answers · asked by Anonymous

how can i make my mustang faster? what should i buy, and in what order, and what do they do, and how much do they cost, and how much would it cost to install it. please answer all my questions

2007-08-10 16:12:47 · 3 answers · asked by Anonymous

I'm looking to replace my front suspension on my 1965 mustang coupe. It's pretty f'd up. Need coil springs, upper and lower arms, the end links, and all the bushings to go with. Any recommendations on where to get all this?

2007-08-10 06:38:43 · 5 answers · asked by Bjammin101 1

I am wanting to get some pipes put on my gt, but not really sure what i want. glass packs may be a bit much for the sound i am wanting. When i am driving down the road I want a nice smooth low deep rumble with out lookin like a dumbass. its a GT without any mods.

2007-08-10 04:06:05 · 7 answers · asked by rachelrmf@sbcglobal.net 2

It is an XLT with 4.0 6 cyl - 4x4 manual transmission. Right now it only has a ball on the bumper - so probably would need to install a towing bar.

Just want to know the safest maximum towing weight - want to pull some kind of camper trailer. Thanks!

2007-08-10 02:05:59 · 5 answers · asked by Anonymous

My A.C. clutch has broken. I have found a replacement pulley at autozone. The a.c. wont work, but I could still drive my car. How much trouble would it be to take out the compressor, and replace it with just the pulley, and how much should I expect to pay if I cant do it?

2007-08-09 11:01:55 · 3 answers · asked by hasdad62 6

The other tools I will have are a hacksaw blade, some paperclips, a ballpoint pen, bedsheets, a comb, toothbrush, a small radio, a bar of soap, and a home made knife. This will be done at night.

2007-08-09 09:05:38 · 6 answers · asked by paul67337 7

2007-08-09 05:36:23 · 6 answers · asked by Anonymous

Whats the best add on that does not cost a fortune and looks good on a 2005-2006 Mustang V6?? not for the engine.

2007-08-09 00:53:02 · 5 answers · asked by nick 1

My 65 289 mustang has a problem when starts i have to tur the key for several seconds sometime 10! and when I drive it ti drives well when I stop it with the engine on it turn off in a 20 sec!!! I have just change all filters what I should think? change fuel pump?
Thanks for help me!!!

2007-08-09 00:27:23 · 7 answers · asked by U.S. pride 3

On my way home from work last night, I noticed my Explorer was beginning to overheat, which was a first to me. I stopped and turned it off to let it cool, then restarted with the heat blasting (providing some relief to the overheating engine) and I made it home. Somehow, the reservoir was bone dry, so I filled it up with antifreeze and took it to get some gas. Now, the temperature gauge has always stayed more or less in the center spot. However, on the way to the convenience store, it moved as I sped up and slowed and generally hovered around the 3/4 to hot range. Anybody have any ideas as to why it won't go back to sticking around halfway and how I can repair it?

2007-08-09 00:01:29 · 3 answers · asked by skitch_19 1

I want to know is it worth it getting a rebuilt transmission?

2007-08-08 17:54:17 · 3 answers · asked by dabomb 1

Yay, I'm 16!!! And I'm getting a car soon. Now, I've always wanted a mustang, but now I'm seeing that EVERYONE has mustangs, so they seem less appealing to me now. So I'm wondering, does anyone know of a car similar to or better than a Mustang i could get??

And it can't be a Mazada RX 8 because my best friend just got one :(

2007-08-08 16:40:49 · 13 answers · asked by Anonymous

2007-08-08 15:24:06 · 10 answers · asked by Wayne M 1

2007-08-08 15:13:44 · 6 answers · asked by NANCY 2

Why is there white smoke coming out of the exhaust?
It's never been white.
If anyone can give me the answer I would really appreaciate it.

2007-08-08 12:21:52 · 3 answers · asked by Anonymous

i want to know how to fix this

2007-08-08 11:14:36 · 2 answers · asked by brannonm97 1

for a week the truck was acting up when you would start it inside would knock a little then run fine but two days later the truck knocked and started smoking and won't stop. I havent moved the truck. i m scared the motor is gone and its a desil. there was motor oil in the motor.

2007-08-08 06:57:48 · 5 answers · asked by htownappliance 1

I have a worn 302 that needs freshend up. I need to know if I need to bore the block or if I could get by with a ring kit. I tore the motor down and I took some messurements. The stock bore is 4.000 and the most ware that I messured was a little less than 4.005. Most were about 4.002. I need to know what to do. Sure boring would be the sure thing to do but if i don't have to i can save a little over $200. Can anyone help!!!!

2007-08-07 17:04:01 · 3 answers · asked by michealsich 1

2007-08-07 16:10:41 · 7 answers · asked by Timothy E 1

2007-08-07 15:53:00 · 2 answers · asked by Anonymous

The Ford GT500. It's a powerful car, weighing in at a fairly large 550 HP from the factory hooked to a Tremec 6-speed transmission.

My question is: are you getting what you pay for? This car costs 50,000 dollars and you get 550 horsepower that acts like 450. That's right, I said it. This big lug has 40 more horsepower than a Dodge Viper and STILL can't manage to get the same 0-60 time, coming in at half a second SLOWER. Then there's the matter of it's top speed. First you've got your Viper SRT-10 - 0-60 in 3.9 seconds and a top speed bordering on 200 mile per hour - Then comes the Ford GT500 reaching 0-60 just barely faster than a Dodge Charger SRT-8 and hitting a mere 154 MPH, the same top speed as a similarly powerful Dodge truck (SRT-10 Ram) that weighs a good full ton more.

At 50K to the Viper's 80,000 it's a bargain, but for 550 horsepower, do you think it's up-to-par? Give me your thoughts

2007-08-07 15:40:17 · 13 answers · asked by The Crow 3