Dodge

Hey, I have a 2004 Dodge Ram.. well about a month ago I was rear ended pretty hard, just tailgate damages, but still driveable. I did not get it serviced yet or repaired. The other day I was driving and my truck went dead. I took it to the shop and they said there was no oil, and they want receipts. The advisor said the cam was welded to the cam shaft.

Now.. for that to happen, would it be caused by no oil or could it have been caused by being rear ended pretty hard?

2007-05-28 06:39:55 · 5 answers · asked by aa 1

I've popped out the old wheel stud on my front driver side and slid the new one in the hole (w/o taking the hub apart). I then screwed my wheel nut (or lug) and tightened it as much as possible to pull the stud through the hub hole (like most people say to do). This is partially working, but its doing more damage to my wheel nut than pulling the stud back through the hub hole, i feel like i'm going to break something because i'm applying so much force into this dinky bolt. Any other ideas? I can't take apart the wheel hub yet because its held together by a gynormous nut that i do not have tools for.

2007-05-28 05:47:48 · 6 answers · asked by bagofmilk 3

Do i need a new tie bolt for the add-a-leaf ? i dont know if it needs to be longer?

2007-05-27 15:53:38 · 5 answers · asked by Anonymous

2007-05-27 13:05:40 · 5 answers · asked by kyle_shega 1

I have went out of town in it and I had no problems. i live in belleville illinois and drove it to branson missouri. I've had it since january of 2005. it had 179,000 on it already. Since then i have only needed to get the radiator flushed and a new harmonic balancer put on.

2007-05-27 06:37:41 · 8 answers · asked by chocolatetiger07 2

2007-05-27 04:16:36 · 5 answers · asked by Paula S 1

when driving it stops after 5 to 6 km, after 30 -40 seconds its starts again, then after 1-2 km it stops again and so on, any ones have any idea whats happening

2007-05-27 03:18:40 · 10 answers · asked by Anonymous

it has a new computer that i just put in 3 years ago so it either has something that killed the computer again or something is telling it not to put out a signal.

2007-05-26 14:50:05 · 2 answers · asked by Anonymous

2007-05-25 21:15:16 · 5 answers · asked by jason r 1

2007-05-24 04:48:15 · 4 answers · asked by chelle_tc 1

Dodge Caravan LE 3.0 fuel injection 6 cylinder
I got answers but every one of them was different....
I need agood solid answer..

2007-05-22 19:57:42 · 6 answers · asked by Ruben45 1

Mine has the 5.7L with the Hemi. I was just curious. Thanks.

2007-05-22 18:07:05 · 12 answers · asked by Mike 2

I just recently bought a White 07 Dodge Charger and i was thinking of giving it a two toned paint job. Would it be cheaper to keep the white either on top or sides and just paint the rest a different color? If so i would like to keep the white and paint the rest another color that compliments it well. I am going to put some 24s or 22s on it depending.... but i was wondering if anyone had any ideas on what colors i should paint it. And if anyone has an idea on how much a good paint job might run me let me know.. I was thinking a Candy Orange on top and leave the white sides.. or maybe keep it simple and clean with Black Top with White sides and some chrome rims with black trimming... well if anyone has any ideas on what i could do to make my charger look sexy let me know...........thnx

2007-05-22 15:54:58 · 9 answers · asked by Anonymous

2007-05-22 11:39:43 · 5 answers · asked by jmpsonic22 1

2007-05-22 10:32:56 · 3 answers · asked by Very curious 2

2007-05-21 05:38:17 · 4 answers · asked by TERRIE S 1

I have a '02 Dodge Ram, so far i have Chrome 22's And The Chrome Gas Cap i plan on puttin the billet grill so is chrome handles too much??

2007-05-21 05:33:19 · 7 answers · asked by Adrian 1

2001 G. Caravan 3.3 V6, Flex Fuel, Auto.

Could anyone tell me what the P1782 code is about

How hard to Change selonoid. (P0755 code) ???

Thanks / Matt

2007-05-21 04:38:39 · 2 answers · asked by MattsMinivan 1

ok heres the story. 73 Dodge Challenger in resto,318 with a mild cam,this winter I replaced the gas tank,installed new cam,timing chain and lifters. It starts and runs fine. When I go about a mile down the road it just quits. It did this 2 times today and I had to get it jumped then it ran fine for a bit and quit again. Last week I installed a new radio and left the ignition on for about 2 hours. Did I maybe cook the coil or ballast resistor? Is the coil breaking down when hot or could it be the fuel system. It has a new Edelbrock 650 on it and a new matching aluminum intake also. Thanks for any ideas. Im gonna check the ignition system tomorrow.

2007-05-20 16:08:15 · 5 answers · asked by davetheresa2001 1

2007-05-20 13:47:10 · 5 answers · asked by kevin h 1

IU am getting a 69 Charger and I want to paint it like the Genoral lee I wanted to know if this would offend any one I lust don't want her keyed
I asked this question on a diffrent section and I don't think any one know what she is they couldn't understand why I mentioned a car with rebel flag and Genoral Lee

2007-05-20 12:42:53 · 9 answers · asked by Marvelgirl 3

ALSO WHAT IS THE TOP SPEED OF THE NEW CHALLENGER

2007-05-20 07:41:20 · 4 answers · asked by young_money_maka 1

When i press lightly on the brakes they make a thumping sound. When i press hard they stop.

2007-05-20 04:57:01 · 5 answers · asked by robertearldixon 1

Was the Dodge SRT-4 the fastest production FWD car in the world at the time of its production? Or any time?

2007-05-19 16:52:42 · 10 answers · asked by Anonymous

of this specific model i'm looking for the camshaft position sensor not book no auto parts have been able to help me if you have seen it let me know please.

2007-05-19 00:56:59 · 5 answers · asked by Anonymous

I need to replace the crank sensor and can't seem to locate it.

2007-05-18 17:45:45 · 6 answers · asked by cher9498 3

I have a 97 dodge 2500 diesel truck and pull a 35 ft 5th wheel trailer. Truck runs cool until I hit grades the quickly heats up. I've changed the thermostate, but made no change in condition. Truck has air cond.condenser, and trans cooler mounted in front of radiator, and factory clutch fan. Should I remove factory fan and install an electric fan to cool the radiator ?? I'm told this is the best way to cool it at slow speeds

2007-05-18 06:11:21 · 6 answers · asked by Anonymous

this motor came from my uncles old dodge but im not sure what it is. its froze up and rusty,cant read the numbers

2007-05-17 19:14:23 · 9 answers · asked by big boy 1

2007-05-17 14:00:04 · 11 answers · asked by mografix 1

2007-05-17 08:25:33 · 3 answers · asked by Anonymous