Cars & Transportation - 29 September 2007

ery in tranny .no visable outside leaks ?!!? thanks

2007-09-29 15:53:07 · 6 answers · asked by Joe M 1 in Maintenance & Repairs

I have a 302 roller lifter block w/ an aftermarket FR E303 cam. Do I use the cam firing order(13726548) or a 302 order? Also, Does it matter where number 1 is on the rotor?Can I just pick a post and use it as number 1? I have a Mallory SS comp distributor and it does not have number 1 marked. I am really confused, but I can't afford a real mechanic...

2007-09-29 15:46:06 · 6 answers · asked by Mike V 4 in Maintenance & Repairs

i have 93 civic ex fully tune up from head to toe but it crashed couple weeks ago and im on a tight buget and the only thing that is wrong with it is the bumper...its aftermarket bumper its missing small chunk on the left side of the bumper and its not holding right can someone please tell me what i can do to fix this small hole with? i tried using some kinda of clay thing which is use to hold wood together its what like u call "super glue"but for wood and its taken to long to dry up
so im just looking for quick tips on how to repair holes on bumpers or anything like that
thanks for all your help i appreciated.

2007-09-29 15:37:44 · 1 answers · asked by Anonymous in Maintenance & Repairs

2007-09-29 15:15:49 · 2 answers · asked by sml_dale 1 in Ford

I have a 1981 yamaha xj550 seca and I'm looking to change the instruments to either after-market or a different model. I think the plastic and the shape is terribly designed. How do I figure out what is compatible with my model of motorcycle. Thanks.

2007-09-29 15:14:31 · 1 answers · asked by Nic 1 in Motorcycles

as soon as i stated it it smoked,i killed it,and started it again it didn't smoke.went all day didn't do it anymore,today nothing this morning but when i got off work it did it again. only lasts a few seconds then stops.

2007-09-29 15:09:15 · 6 answers · asked by Anonymous in Dodge

2007-09-29 14:50:05 · 4 answers · asked by BUGGZ 3 in Safety

Although I don't really know what knocking means, but, this car when running seems 'knocking'. I measured the compression pressure, they are 200, 200, 60, 200...aaah...3rd cylinder has problem. I poured a tea spoon of oil, rechecked the pressure, still 60, so, piston rings are not the problem. So, could it be the crankshaft bearing? and, also, the cause of knocking?

2007-09-29 14:47:23 · 4 answers · asked by James1982 2 in Dodge

Generation 6; The goofy looking ones they make now.
Gen. 5; 90s to 00s
Gen. 4; 1984- 90's
G. 3; 68-83 mako shark derivitive
G.2; 63-67 sting ray
That only leaves 1 more generation. It can't be 1953- 1962!, There is so much difference between the '53 ,with the blue flame 6+2 sp. powerglide , GM's attempt to make a Jaguar xk120, and the "62 there is no way a rational person would put both in the same generation. Maybe one could put the 53,54+55 in gen.1 and squeeze 56 to 62 into the same generation, but thery're at least 2 or 3. Perhaps they dont consider the 1st corvettes to be real corvettes, and count the '56 with the V8 and dual 4 barrels as the 1st corvette, and ignore the earlier ones? The guy who named the current generation G.6 must be some kind of a retard

2007-09-29 14:47:09 · 6 answers · asked by KABANGA 3 in Chevrolet

2007-09-29 14:42:35 · 4 answers · asked by littlel 2 in Boats & Boating

im installing an aftermarket stereo in my 97 mountaineer, but the old 1 didnt have any codes on it...ive already cut all the wires i just need the codes...
btw. the old stereo was just an am/fm/cassette

2007-09-29 14:40:00 · 3 answers · asked by Anonymous in Car Audio

Replacing two piece driveshaft centre support 88 gmc?
Does anyone have any tips on how to replace this part in a 88 gmc sierra ext pick up truck im going to attempt to do it myself yeaa. p.s. and if anyone could tell me why this might have failed thank you everyone

Additional Details

6 hours ago
What if i replace the entire shaft with one from another vehicle same make model would that work

2007-09-29 14:25:29 · 3 answers · asked by ryan g 1 in Maintenance & Repairs

2007-09-29 14:24:33 · 6 answers · asked by Anonymous in Ford

What should I make my license plate?

I am 16 years old--

I play football

I am going to be a police officer


I am a lineman and I am #79



Also people my parents asked me what i wanted on the plates so yah..

Haters:
Shut up
I have the money to do it
I am not a crazy teen driver like most are
and keep ur comments to yourself

These Plates must contain no less than four letters and no more than seven letters or combination of four letters and numbers.

2007-09-29 14:15:07 · 6 answers · asked by Nate 1 in Other - Cars & Transportation

i was at a drive through and a car hit me and drove off i had no bad damage to my car but my neck back hurt will my insurance pay med pay and i have witnesses the guy that hit me drove off and has yet to b caught

2007-09-29 14:13:14 · 2 answers · asked by malik g 1 in Insurance & Registration

I would like a truck, but I don't know if that is the best choice. Any thoughts on what would last a while and not break down easily?

2007-09-29 14:06:06 · 6 answers · asked by panda7504 4 in Buying & Selling

2007-09-29 14:04:10 · 9 answers · asked by danny h 1 in Pontiac

It had only one owner and driven less then the average yearly use.

2007-09-29 13:59:33 · 7 answers · asked by viviana_m_sanchez 2 in Buying & Selling

I want to buy this motor from a man he said that it was a good 307 v8 but the thing is the motor is not installed in a car so is there anything that i could look at on the motor to see if its any good

2007-09-29 13:55:00 · 8 answers · asked by quaqua88 1 in Maintenance & Repairs

i need to try something on this 4.3 vortec knocking noisy pig

2007-09-29 13:52:24 · 5 answers · asked by jeff m 2 in Maintenance & Repairs

Mine personally is the FA-18 Super Hornet.

2007-09-29 13:47:30 · 35 answers · asked by SNAKEDOG 3 in Aircraft

i change spark plugs, and da engine oil on my 94 buick lesabre -that engine require 4.3 quote -idid put 5 quote in it but now the car make a (pop) sound when i reveve da eng like it backfire-is that extra oil can make it do that -one funny style mechanic make me buy a stop leakn-burn oil product ,nothing change then tell me -it,s a valve that,s bad--the car did not use to make that noise before.what should i do

2007-09-29 13:47:03 · 4 answers · asked by widner a 1 in Maintenance & Repairs

I havent made this decision yet but I am thinking of doing it. Income is about 60k before taxes. I have a car note right now of $550. I am going to trade that in for a different one, and I estimate about a $700/month payment. Rent is about 800/month, utilities about another 200, car insurance is 117, probably will go up on the newer car. I dont smoke or drink so I dont have those expenses.

2007-09-29 13:45:21 · 3 answers · asked by darko_d1 1 in Buying & Selling

how can i test a ecm that i already removed from my 1992 geo tracker? I took it out today thinking the auto parts store could test it, but they dont. please help!!

2007-09-29 13:44:34 · 3 answers · asked by Ellen 1 in Chevrolet

2007-09-29 13:42:50 · 3 answers · asked by Crispy 2 in Insurance & Registration

My car is overheating and stalling, and I want to check if the thermos-stat is sticking. Or else do any of you know what else it can be? There was a spray on my windshield, but checking I could not find any where that there was a leak.

2007-09-29 13:39:16 · 5 answers · asked by Anonymous in Maintenance & Repairs

2007-09-29 13:37:35 · 2 answers · asked by Anonymous in Maintenance & Repairs

2007-09-29 13:30:43 · 2 answers · asked by Anonymous in Insurance & Registration

Its a v8 305 and almost every time i start it up black smoke comes out the exhaust! i dont know what the problem is?? i just changed the catalytic converter and the muffler too???

2007-09-29 13:21:18 · 8 answers · asked by Roy P 1 in Maintenance & Repairs

I have a 15 h.p Kohler Command 1 cylinder which started backfiring after I replaced the air filter. It would run fine until under a load then start cutting out and backfiring. Just on a whim, I took the plastic cover off of the air cleaner assembly, leaving the air filter and the foam pre-filter on it, and I finished mowing without any problem. I know on some automotive carburetors, if the wing nut is overtightened, it will distort the air horn and cause a vacuum leak. Could this be a similar problem?

2007-09-29 13:20:13 · 5 answers · asked by Anonymous in Maintenance & Repairs