Engineering - November 2007

2007-11-21 01:55:41 · 1 answers · asked by th_effect 1

Hi guys, could use some help on this one.
Here is a screenshot:
http://img232.imageshack.us/img232/8095/62339971np9.png

2007-11-21 01:34:16 · 2 answers · asked by Anonymous

How do i multiply 2 8bit no's in 8085 using repeated addition method ?
I got some idea by a previous answer but how will i write a program if i hve to multiply F2(H)*24(H) ? H is hexadecimal .

2007-11-21 00:41:43 · 1 answers · asked by Devil 4

2007-11-20 23:59:14 · 1 answers · asked by marvin 1

2007-11-20 22:05:43 · 5 answers · asked by Anonymous

this is about using a conveyor, then you need to sort them according to size(small, medium, large). The machine will put them in separate boxes.

2007-11-20 20:56:46 · 1 answers · asked by arni 1

and what their acronyms...

2007-11-20 20:16:43 · 1 answers · asked by Azzam Al-Saffar 1

I need to build a robot that has to pick up things and has to be some what fast. I need to build and arm but how?? and if you have any tips please telll me. i also can not make the robot with tires or legos, if u have any ideas plz tell me.

2007-11-20 11:44:42 · 3 answers · asked by x_we_fly_high_x 2

how do you broadcast your own radio station? how would you go about this using short wave/long wave radios

2007-11-20 10:34:53 · 6 answers · asked by i am me 1

2007-11-20 08:12:00 · 3 answers · asked by parasu r 1

Graduated with two year diploma in mechanical engineering in 2001 and then Graduated in B.S chemical engineering in 2005 (with average grades).

Worked as an instrument engineer for one year after school in the mining industry. Just recently joined a construction firm doing contruction engineering to the oil and gas sector.

Ambition is to hold a managerial/senior position in a oil refinery down the road. But till now lacking pure technical experience. Most of my work presently involved project/construction managment that includes, estimation, budgeting, cost controling and helping the contruction phase of oil gas engineering as opposed to design.

My question is weather this experience will help me move into managment level at the oil refinery later on down the road or would I have to gain technical experience (which a few people suggest is good, but due to average grades finding it hard to break into the refinining enviroment directly) and plus lots of work politics.

Thx

2007-11-20 08:07:44 · 2 answers · asked by planck12 1

I have a cheap 10 buck red laser from office max and i wanted to know if you can modify red lasers especially really cheap ones i dont want to modify it to burn through things but just to be able to see the beam would be great because i dont want to waste my money on some like 100 buck laser

2007-11-20 06:13:31 · 3 answers · asked by nedthewaterbottle 2

i guess i needed to rework this question...guess im not the only one with a personallity

2007-11-20 05:16:12 · 2 answers · asked by jay 1

induction motor

2007-11-20 04:51:53 · 1 answers · asked by Hari 1

What Temperature Transducers are used for:-

•Engine Exhaust Gas Monitoring

•Engine Temperature at/near the Combustion Chamber

•Cabin Temperature

please give me full name.

i am so pissed-off, i can't find this information any where

help me out...Please!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

2007-11-20 04:21:27 · 1 answers · asked by Abdul-Hasib Matloob 2

http://www.wmf.org/resources/photogallery/images/spain_segovia_aqueduct.jpg

2007-11-20 03:58:41 · 3 answers · asked by Alexander 6

Is it a stressful course to venture in?
Do u need to study all the time?
Is it worth it?
I love aircraft by the way........

2007-11-20 03:53:33 · 4 answers · asked by Anonymous

2007-11-20 03:11:17 · 8 answers · asked by Anonymous

A company manufacturing fiberglass “batt” insulation has determined that a full trailer load of product only weighs about 10,000 pounds. The trailer has a rated capacity of 40,000 pounds.

a. Does the trailer “cube out” or “weigh out”?

b. What can be done to get more product (weight) on a trailer? Discuss limitations to your approach.

2007-11-20 02:47:18 · 2 answers · asked by Patrick 1

Is there any way to melt steel without the intense heat of a blast furnace?

2007-11-20 02:15:16 · 10 answers · asked by Anonymous

Briefly describe what occurs when the following are forced into a block of photoelectric material: a flat punch, a narrow-faced punch, and a knife edge punch.

2007-11-20 01:21:10 · 2 answers · asked by enzo s 2

A power generating facility is designed on DC power generation, with a low RPM Dynamo, how can we convert the out put into A/C and what shall be the conversion factor

2007-11-20 00:36:50 · 5 answers · asked by starsysmzg 3

at 345 volts dc, how much current can a standard size paper clip have running through it?

2007-11-19 16:37:46 · 3 answers · asked by Alex 3

2007-11-19 15:02:42 · 2 answers · asked by binu 1

distance b/w two front supports is 1.m (distance while still on surface).

2007-11-19 14:56:56 · 2 answers · asked by oiuyt 1

does anybody know a website that i could go to for a science project??

2007-11-19 14:36:56 · 2 answers · asked by VAl 1

2007-11-19 14:34:57 · 3 answers · asked by Delicia S 1

2007-11-19 13:30:56 · 2 answers · asked by kats_kdc 1

2007-11-19 13:27:24 · 4 answers · asked by leon_att 1

2007-11-19 12:45:54 · 1 answers · asked by gaspar e 1