Maintenance & Repairs - December 2006

I bought a drill bit set, and have used the masonry bits, no problem. Can anyone please tell me for what applications the HSS bits are for?

2006-12-01 04:09:29 · 12 answers · asked by Anonymous

it has fresh gas/oil mix, I primed it and the choke is one. I get nothing when I pull the rope....any thoughts on next step??

2006-12-01 04:06:19 · 3 answers · asked by Anonymous

I can turn the thermostat off and it still runs. If I shut off the breaker it will stop running, but as soon as I turn the breaker back on it starts running again. The heat/air doesn't stay on...only the fan.

2006-12-01 03:54:19 · 3 answers · asked by s10_8399 1

2006-12-01 03:50:06 · 8 answers · asked by LORI M 1

2006-12-01 03:43:10 · 3 answers · asked by atiq408 1

The chairs are on wheels with a center post. Something in side of the post is either broken or loose. My room-mates Son-in-law, daughter, and grand-daughter all set in the chairs at one time. After that the chairs no longer set upright properly. When you set down in them they cause you to lean forward or back. You have to try to balance in them and it's very uncomfortable. I've been looking some place to get them fixed and all I can find are places to get them refinished. I either need someone to repair them or some place to buy the parts to fix them myself. If anyone out there knows of any place, please, let me know. Thanking you in advance!

2006-12-01 03:39:20 · 1 answers · asked by faxdoc 1

I have a B/D 7.2V drill and four batteries but no charger. Can I buy a charger without the batteries and if so by e-mail? Thanks...Dallas

2006-12-01 03:25:00 · 7 answers · asked by dallas l 1

the roof is made of standard RCC of 4.5inch thick.

2006-12-01 03:03:34 · 5 answers · asked by k r 1

Specifically, I bought a house that came with one, the plug to the pump blew out and quite frankly the pool is just too big to have it in my medium sized yard. So between the fact that the pump is not currently working and I don't really like it anyways I would like to get rid of it. Its kind of old and not in great condition so after running it in the free pages for awhile I was wondering how I might go about disposing of it? Like I said earlier its very large, aluminum, and not in great condition. Where can I take it? Are aluminum pools recyclable? What’s the standard procedure for something like this?

2006-12-01 02:54:36 · 6 answers · asked by Amy B 1

I want the ceiling to stay popcorn. I plan to paint the whole thing after I have repaired the area where the wall was. There are 2x4s running the length of the exposed area, and they will come down, which will leave a big area needing repair. There are no issues with support; already taken care of that. Any help will be appreciated! Thank you!

2006-12-01 02:36:19 · 4 answers · asked by newt 1

I already told my insurance company. I bought a wet/dry vacuum too and vacuumed up all the water. To make matters worse, I live in a condo and it soaked her light fixtures and electrical wires. Should I call an electrician to go to her place or does insurance cover that? OH BOY...

2006-12-01 02:11:25 · 8 answers · asked by ace 1

My house makes this weird sound a few times a day. First, it will make a sound like the furnace is going on (but its not actually the furnace) then it sounds like pipes are rattling, then 3-4 big thumping sounds. I cant even find where the noise is actually coming from. Its not the furnace room. I think it has something to do with the pipes. My pipes were clogged before, so I used drano, and the pipes were clear and the noise went away. now, the pipes are still clear but the noise is back. any suggestions?

2006-12-01 02:04:10 · 6 answers · asked by Anonymous

2006-12-01 01:59:52 · 6 answers · asked by loopy - lou 1

My washer smells mildewy and is off-balance during the spin cycle. I want to see if there is anything I can do, before calling a repair person.

2006-12-01 01:22:45 · 3 answers · asked by heylady 2

the plate in my microwave is not revolving. when i checked the plastic turn table under the plate is broken. where can i get that plastic thing. please help

2006-12-01 00:51:57 · 7 answers · asked by snigdha 3

THE PILOT LIGHT IS WORKING BUT THE BURNERS WILL NOT TURN ON IT IS ABOUT 10-15 YEARS OLD THE FAN WORKS FINE ANY SUGGESTIONS?

2006-12-01 00:47:49 · 7 answers · asked by Al W 1

Anyone know how to stop floorboards creeking

2006-12-01 00:35:51 · 14 answers · asked by Nathaniel 1

I purchased a HDS 500 pressure washer that I believe burns diesel. I plug it in and the motor that pumps the water seems to blast at the first pull of the handle then slows alittle and I dont know how the igniter works to light the diesel, its 110 volt, I cant find anyone who works on these in my area. Springfield Missouri, anyone HELP!

2006-12-01 00:26:01 · 2 answers · asked by kathyannage 2

2006-12-01 00:08:17 · 3 answers · asked by tylercalee 2