Other - Hardware - July 2007

Im also using Nero 7 Ultra Edition.

2007-07-24 19:01:37 · 4 answers · asked by Jonathan m 1

I might switch to vista so I need to back-up all my files. Or, I need more space for my computer temporarily to use it as an external hard drive.

Also do you know how I might use my xbox hard drive, for my computer?

while i'm at it, i'm downloading alleged videogame files off of emule, if it's successful, do you think it would work when I burn the iso to a dvd-r disc? they're xbox, ps2 games. Hope FFXII is promising.

2007-07-24 18:09:53 · 1 answers · asked by Anonymous

How sellable are shop assembled PCs compared to branded ones like Dell? Who buys such computers?

2007-07-24 17:37:49 · 3 answers · asked by StandTall 4

wich one is the most important wich one is the bigger one and is there any other

2007-07-24 17:14:58 · 6 answers · asked by JUAN G 2

i am wanting to know would the ultra x2 550 watt power supply be a good PSU to use and would it hold up or should i look into some other power supply

2007-07-24 15:37:03 · 2 answers · asked by sillyguyfromfla812005 2

Which is faster in real terms,not overclocked.

The pentium d 830(2x3.0mhz) or the core duo e6600(2x2.40mhz)

I expect most people will say the core duo but i dont get it,one is 3.00mhz and the other is 2.40mhz.

Any help would be appreciated because i'm building a second computer and i want to make sure i have all the best parts in the same computer.

2007-07-24 15:03:05 · 8 answers · asked by Anonymous

The 2.33ghz Core 2 Duo (T7600) processor sells for about $500 more retail than the lowest clock speed Core 2 Duo processor (I believe 1.66ghz).

My question is, does it even cost the manufacturer $5 more dollars to make a 2.33ghz than a 1.66ghz processor?

2007-07-24 14:50:33 · 2 answers · asked by darkmanx1209 2

It is already past July 22 and the price of the E6750 isn't the price it is expected to be at $183. Instead, the lowest price, I've seen is about $210. What gives? Is the price ever going to be the expected $183 rumored to be?

2007-07-24 14:48:35 · 2 answers · asked by JumpMan XXIII 1

I'm wondering how do I install a RADEON X600 graphic card to my PC before I buy it. I don't want to be clueless when I actually buy it. If you could help that would be great.

2007-07-24 14:29:18 · 5 answers · asked by MrNinjaManners 1

2007-07-24 11:56:01 · 3 answers · asked by Andrew D 1

2007-07-24 11:17:43 · 12 answers · asked by chris m 2

I have a SimpleTech 160 GB external hard drive. Its making a quiet "buzzzz-click" noise. Tech support says it is defective and needs replacement. (of course!) Ive taken it apart and banged it on the table a couple of times. Any better suggestions?

2007-07-24 11:13:40 · 5 answers · asked by CuriousLee 1

2007-07-24 10:26:27 · 1 answers · asked by whoischrisjenkins 2

The motherboard says this:

* Form Factor
ATX footprint (12" x 9.6"); Stacked USB ports
One 20-pin ATX power connector
Stacked keyboard and mouse ports
One serial and one VGA port
Two RJ-45 LAN ports with LED

And the case says it can handle these :
AT, ATX & Micro ATX

So i guess what im asking is.. Can the case that says it can handle ATX handle somtheing that says it has an "ATX footprint"?




Here they are if you wanna look at them

Mo/Bo : http://cgi.ebay.com/TYAN-ThunderLE-S25510-Dual-Socket-370-Motherboard_W0QQitemZ140141464260QQihZ004QQcategoryZ42005QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Case: : http://cgi.ebay.com/Mid-Tower-ATX-Black-Case-Temp-Display-LP600w-PS-w-SATA_W0QQitemZ230153599881QQihZ013QQcategoryZ3669QQrdZ1QQcmdZViewItem

Thanks

2007-07-24 10:05:06 · 4 answers · asked by Xboxman32 1

I need to find the right motherboard that would support my cpu's fsb of 1333 MHz. Also one with SLI capability with 2 PCI-Express x 16 @ x16.

2007-07-24 07:56:41 · 5 answers · asked by Daniel K 2

2007-07-24 07:24:38 · 4 answers · asked by la mexican chick puro mexican 1

I can't stand it. My voice makes me sound like some gay kid. I want to continue movie making with voices not subtitles. I have people that would love to not read subtitles. Help me!

2007-07-24 06:29:57 · 7 answers · asked by Anonymous

2007-07-24 03:54:52 · 5 answers · asked by Anonymous

Hello there,

My computer has been running brilliantly for a while now. Last week however, I turned it on and it came up with a problem saying to "ensure that the power to the graphics card is connected".

I did just this and it was connected and continued to not work. Then... I took the fan off the processor (suspecting this as the problem) and then made sure everything was ok with it. After doing this, the computer then booted as per normal. I found this weird but ignored it...

Then yesterday, I tried to turn it on but it wouldnt boot. Everything turned on inside (fans, HDs etc) but nothing on the screen.

I suspected the CPU again and bought a new one... to no avail.
Then I changed the video card with another and still nothing...

Is this the case of a cracked or dud motherboard??
The green light is still on the motherboard however, when I try to turn it on.

I have tried taking out the RAM and HDs one by one but still nothing...

Any help is appreciated.

2007-07-24 03:23:51 · 7 answers · asked by Anonymous

Will this graphics card be able to run Guild Wars without any problems? HIS Hightech H925H128E1TOPN Radeon 9250 128MB DDR PCI Video Card

2007-07-24 01:37:07 · 8 answers · asked by wowplayer0506 1

I want to download some software to my computer and am looking for possibilities to keep it from dragging and starting to run slow or lock up at times. Any advise is appreciated.

2007-07-24 00:31:00 · 6 answers · asked by ooome3 1

I just tested the speed of my router, 96.15 is the low, and 102.56 is the high

2007-07-23 17:02:01 · 3 answers · asked by scorp964 3

I can't figure this out. I am using a Pic 16F627A chip. PORTB is connected to 8 leds in series with a 120ohm resistor. The red end of my 3 v power supply is hooked to pin 14, the black end to pin 5. The short end of the leds are connected to pin 5.

My code is posted here: http://forum.microchip.com/tm.aspx?m=270363

It does absolutly nothing. Please help me!

PS according to the MPSIM software, this works correctly, it loops around and should output stuff in the leds.

2007-07-23 16:02:01 · 1 answers · asked by Tyler H 3

2007-07-23 14:23:53 · 1 answers · asked by Mikel B 1

I just recently bought 2 sticks of 256mb ram. I have a dual processor. I was trying to upgrade from 512 (also 2 sticks of 256 ram) to a full 1gig. When I put in the new ram with the old, it did not work, so I took out the new sticks and only left the old ones in there... but now that won't work either!!!!

My computer seems to be turning on, but nothing is on the screen. The CD / DVD drive lights up, ect. Any ideas?

2007-07-23 13:14:49 · 4 answers · asked by pizzagirl 3

Here are my specs:

MotherBoard MSI 945P Neo-F
CPU Intel Pentium 4 630 3.0GHz RAM 1GB PC2-5300 / PC2-5400 DDR2 667 Unbuffered
NonECC HDD Maxtor -HD 200GB
Video GeForce 6800 GT
256Mb PCI-E CD/DVD NEC ND 3540A 16X Double Layer
DVD+/-RW PSU 500W

I recently reinstalled my windows XP and nothing is working: Sound, Video even my LAN internet is down.
Can someone give me a FULL list of drivers I need for my system to be working properly?

2007-07-23 13:09:32 · 9 answers · asked by Andre D 2

My desktop got a onboard vga. But i need to disable it because I have a much better PCI VGA card. What should I do? BIOS looks so complicated. what happens if I don't disable it? can I do it inside windows?

2007-07-23 12:18:03 · 9 answers · asked by zedzo 1

And you can replace you processor cant you, is it compatable with this proccesor?
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=3044668&Sku=CP2-AM2-5400%20P

2007-07-23 11:17:10 · 5 answers · asked by Anonymous

Before i go to sleep i usually pull off the plug of my computer. But then recently i encountered this problem that whenever i leave my computer unsocketed for hours it just doesnt seem to turn on right (no power at all).. I keep on pressing the power button but it just does not seem to work.. Now all i do is keep the plug socketed for it to be useable.. i cant keep it like that. what if it gets worse, i need help?

2007-07-23 09:26:58 · 5 answers · asked by Eon 2

2007-07-23 09:16:24 · 6 answers · asked by Anonymous