English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

Add-ons - February 2007

[Selected]: All categories Computers & Internet Hardware Add-ons

Eager to reward my daughter for her good school grades, we gave her a brand new laptop which works great and also a brand new There lies the problem. I saw INTEL 3.2 GHz and went for it to only to find that the stupid PC is USELESSLY slow. I do mean USELESS.... Absolutely useless. It takes ages to do anything !! It is an INTEL 'Cerelon' and came with only 256 of memory and so my question is: Will the installation of 1GB of memory bring the PC to normal speed ? Will it solve the problem ? Any advice will be very much appreciated. Thanks you. The model of the PC is "HP Pavillion a1507.uk" -- Thanks again

2007-02-10 05:53:10 · 1 answers · asked by RED-CHROME 6

i am upgrading my p.c in the spare room,at the momoent it has a athlon 3200+,1gb ram and a nvidia geforce 6200(128mb)
i have a budget of £100 to spend on it and have found a 1gb corsair ddr3200 memory module for £51,and to compliment it a geforce 6600gt(128mb) for £46
at the moment my memory configuration is bank 1)512mb 2)256mb 3)256mb = 1gb
so i will take out one of the 256mb modules and replace with the 1gb module giving a system memory of 1792mb
adding this improvemt with the geforce 6600gt is this a worthwile upgrade considering the budget and the processor it has
any feedback will be usefull
thanks

2007-02-10 05:53:10 · 4 answers · asked by brianthesnail123 7

I am using a Iomega external DVD/CD burner and a built-in HP Pavilion Laptop burner.

2007-02-10 05:07:18 · 7 answers · asked by frikyfrak 1

2007-02-10 04:51:50 · 1 answers · asked by jack b 1

After putting a full pint glass on my PC cup holder, it snapped (a real mess). I looked in PC world, but some kid just said they didn't sell them. The one I have is an electric model, where the holder comes out of a drawer marked 'DVD-ROM' when you press the button. Is that the brand I should look for?

2007-02-10 03:44:41 · 8 answers · asked by Anonymous

I have one computer hooked up and working, now I can't get the second one to work...there are two open spots on the back so I hooked the two phone lines from second computer, but it still doesn't work ...what am I doing wrong? It is a Linksys wireless-G 2.4 router

2007-02-10 03:41:59 · 1 answers · asked by Anonymous

Hey before i buy a new video card...i saw a new one called PCIe? Can i use a PCIe video card in my PCI slot?

2007-02-10 03:37:50 · 3 answers · asked by ragde540 1

as i know it is not just turned off. what is it prossessing. i know if you have 2 sli or crossfire cards 1 is physics 1 is rendering. so what is the graphics chip on the motherboard doing A. when there is one gpu card and 2. if there are two cards, if that matters. also i know that if three cards are applied that 1 is physics 1 is to half and 1 is bottom have of screen so what is it if there is four cards does it make it a three part screen or 2 physics one for each half of screen(not likely i think). i would like a link to explain some of this if you could please. i have been to ati.amd.com and nvidia.com also instead of 3 and 4+ cards howcome they dont just open more power to 1 pci-x(now) and just add more chips sets to 1 card as many gamers would prefer to buy 1 card as to more than one(just a thought). guess there is not enough room on 1 card.

2007-02-10 02:05:31 · 1 answers · asked by dudedawg20 3

My laptop is going to be reverted to factory state after a repair. Will I be able to reinstall my system with these discs or do I have to buy another type?

2007-02-10 01:16:50 · 4 answers · asked by Bee 4

I just got a sony dvd burner on ebay and I plugged everything in. It came with a installation cd but It has so many files so I don't know which one to install. these are the files on the cd. PCI to USB 2.0 4+1, 3s, alcor, ALi, bluetooth, cmd, cmedia, Davicom, FreeDik, Genesys, ITE, KTC, MosChip, myson, nec, Neodio, VIA, NetMOS, Phison, Prolific, Realtek, Sigmatel, Silicon_Image.

2007-02-10 01:06:52 · 3 answers · asked by Anonymous

power supply
http://www.newegg.com/Product/Product.asp?Item=N82E16817153042

video card
http://www.newegg.com/Product/Product.asp?Item=N82E16814143081



i really dont know much bout powersupply and about amps and stuff so can some one help figure put if this psu will run the video card.


Amd 4200+ x2
2gigs ram
300gig hdd

2007-02-10 00:43:12 · 4 answers · asked by izra120 1

hey, i was wondering, how do you know if your p.c has got a video card, and what type it is?
thanks

2007-02-10 00:34:11 · 9 answers · asked by Anonymous

I have just bought a creative 5.1 Inspire P580 surround sound system and a Creative Sound Blaster Live Digital 5.1 sound card (SB0100) and, eventually got it to work!!1 But I cannot get the centre speaker to work. I did a test on all the speakers and the centre one was fine. But if i play music it wont work, or play music direct from the internet (youtube) it wont work then either!!

I have been into speaker setting and adjusted it to 5.1 surround sound, but still the centre speaker will not work.

2007-02-09 22:38:10 · 3 answers · asked by Paul C 6

I have a DDR RAM PC266 and I want to upgrade into DDR RAM PC532 is it possible to do without changing my motherboard.

2007-02-09 22:35:41 · 2 answers · asked by psych_erotica 1

I am using Windows Vista. The headphone part of my headset works, but my computer doesnt recognize the mic. Do i need to buy 1 adaptor for both jacks?

2007-02-09 19:13:26 · 5 answers · asked by Anonymous

on the front of my computer, i have slots to put in memory cards. the card that i have is the smallest (physical) card available, it's the micro sd transflash 2gb. it came with an adapter, the adapter fits into the mmc/sd slot on my computer. it's not recognizing it though (when i look in "my computer", it doesn't show up) the small card works in my tmobile dash but i've decided that for editing purposes, it would be easier for me to just put the card directly into the computer (i'm being very picky about how my music is displayed and i'm sure i want to do it this way...let's leave it at that)...so it's not working. i think the problem is that the driver associated with that slot is for the mmc card. i'm just wanting to know who agrees with me so i can finally give up until i get the driver. and if you do agree, where could i get that driver? please don't just guess, i know a lot about this stuff but i haven't been in a situation where i needed an adapter like that before. thank you.

2007-02-09 19:04:44 · 6 answers · asked by ? 2

i have an external flash drive and I use it to run video games. It gets a little warm sometimes and I was wondering if it was bad to run programs off it.

2007-02-09 17:30:43 · 4 answers · asked by Anonymous

2007-02-09 17:04:47 · 2 answers · asked by pismoru500 1

i just spilt a drink all over my mouse

(wasn't atached at the time - have a laptop)

Is it completely bolloxed now??

Is it even worth drying it out and trying it?\

2007-02-09 16:57:53 · 4 answers · asked by Anonymous

Its a Dell Optiplex GX1 400 and is currently running Windows 2000 Pro. I just want to know if its worth upgrading or buying a new computer.

2007-02-09 15:51:14 · 2 answers · asked by vanisifamily@sbcglobal.net 1

I just go a dvd burner on ebay which I believe is a sony and I plugged everything in. It came with a installation cd but It has so many files so I don't know which one to download. The burner I got looks like this.
http://www.newegg.com/Product/Product.asp?Item=N82E16817801005

2007-02-09 15:10:52 · 1 answers · asked by Anonymous

i just bought a mini web cam and i wanted to know how to take pictures and creating new pictures

2007-02-09 14:13:24 · 1 answers · asked by Felicia K 1

It may just be me or something but it seems with this motherboard:

BFG Tech BFG680i SLi
http://www.newegg.com/Product/Product.asp?item=N82E16813189003

and SLI with these Video cards:
XFX GeForce 8800GTX 768MB(x2)

http://www.newegg.com/Product/Product.asp?Item=N82E16814150214

That its a waste of a pci slot because you would think that the fan would be made to occupy the side with the x4 PCIE slot?

I have never built a computer before so I might just be looking at it wrong.

2007-02-09 14:09:04 · 4 answers · asked by madclowndisease16 1

Im trying to configure my router to work with utorrent by Port Forwarding. The web tells me my IP is 69.249.144.22
While the PC tells me something totally different.. I dont understand?

Thanks,

Dominick

2007-02-09 13:07:09 · 4 answers · asked by Nick N 3

2007-02-09 12:39:34 · 3 answers · asked by Anonymous

i want to biuld one system that was design for run old game sthat will not run on xp and vista such as jane's longbow 2 f-15. i want to use window 98se but i am not sure which hardware i will need to get .. it must be intel mobo only no 3th party company only intel motherboard with intel P 4 processer.

2007-02-09 12:32:49 · 1 answers · asked by Damien M 2

I just installed a new HDD in my comp. When I go to my computer the drive is not there but it is in device manager. Also on boot up if my CD drives are plugged in - the computer wont boot - but if i unplug them it will. any suggestions for either prob?

2007-02-09 12:20:51 · 5 answers · asked by Anonymous

I tried installing Nero on it and i wouldn't work. Do I need to download the new software (for free?) or do I need to buy the New Nero that is supported by Vista?

2007-02-09 12:07:08 · 7 answers · asked by General Vic 2

fedest.com, questions and answers