Ford

2006-09-10 07:12:45 · 14 answers · asked by Anonymous

looking for bumppers for a mark 5 escort in met green any knows would be great help

2006-09-10 05:55:09 · 1 answers · asked by Anonymous

Has anyone ever heard of this. I am looking at a 1996 F-150 4X4 the truck seems to pull to the right while I was test driving it. I took the truck to a local garge to have it looked at with the owner because I nevered owned a Ford before and wanted to put this on a lift to get a good look at the under body!! While I was checking the ball joints I can't get any play in the ball joints but the mechanic stated that Fords ball joints don't useually go loose and that they normally gauled up. Now being used to owning Chevy's for years I have never really heard of this. And to me when a ball joint goes bad there is usually play in it right?

2006-09-10 03:46:20 · 13 answers · asked by ftyatb 1

already changed air filter.

2006-09-10 03:28:58 · 6 answers · asked by Anonymous

my boy friend has a 6 cyl 5 spd 1993 ford ranger and his gas gage dose not work so we dont know exacly how far he can go b4 he is on E we thought 250 would be a safe place but if any one can help plz let me know

2006-09-09 21:54:07 · 10 answers · asked by happy_poole 1

2006-09-09 20:50:34 · 6 answers · asked by Ali C 1

Ive got one, and im going to be start making about 2k a month more and i want to fix up my car. What should I do first?

2006-09-09 11:45:32 · 16 answers · asked by 96.7 KCAL ROCKS!!! 3

i will not be useing the ecu its going to be old school on a new school body

2006-09-09 10:00:20 · 5 answers · asked by jake 2

2006-09-09 09:56:12 · 2 answers · asked by outdoorsalot 1

just a mustang no fastback??

2006-09-09 07:13:06 · 5 answers · asked by Anonymous

How do I fix the linkage, please? Only have Park, Reverse, Neutral, and Overdrive....Prior owner replaced transmission and now there's no LOW gear. I can shift the column to it, but it's still Drive....I also have to shift all the way down on the column, then back up to R to shift into Reverse. Still no LOW gear!

2006-09-09 03:40:04 · 5 answers · asked by KATHLEEN M 1

2006-09-08 22:18:26 · 7 answers · asked by preeti_taunk89 1

I have a 66 Mustang with a 302 and I believe that I have a cracked head. Someone told me it might be a cracked block but I don't think it shows the signs of one. There is oil in the coolant, but no coolant in the oil. There is no white smoke coming out of the exhaust. There is no foaming or bubbling coming from the block. Is it still possible for it to be a cracked block because I am kind of paranoid that it might be. I am planning on replacing the heads within the next week and I wont drive it until I do.

2006-09-08 20:19:42 · 13 answers · asked by Anonymous

the new model that is.. their slogan is .. live life with josh/
i need a snappy and sleek one..

2006-09-08 18:21:34 · 9 answers · asked by jal 3

1992 Ford Ranger, 5 speed, all stock.
I was wondering if i could put 33's on it with out using a lift kit of do i need one. If so how big of a lift kit.

2006-09-08 17:13:06 · 2 answers · asked by borndownsouth 1

v6 3.0L...Why when i go into higher rpms then switch gears i get this weird smell like gas??

2006-09-08 16:46:01 · 8 answers · asked by Anonymous

2006-09-08 14:06:46 · 12 answers · asked by Anonymous

i would like specifics or link to a diagram or anything would be helpful, i already know some things of the basics but i wonder if anyone knows this model and more detail what it could be.

2006-09-08 13:54:34 · 10 answers · asked by abandonedastronaut 1

I can't figure out what it is, but It looks like its connected to my DIstributor.

2006-09-08 12:34:16 · 3 answers · asked by acidicmarrow 2

clutch pedal only comes half way up after depressing it, at the moment its only an intermittant problem

2006-09-08 10:59:33 · 11 answers · asked by pico 1

I have two keys both from the dealer i have the key clicker
My husband just uses the key to lock and unlock the doors he drove the car for two days and now the horn and the anit-theft system doesn't work is there something I could do without it costing me a ton of money.

2006-09-08 03:48:25 · 8 answers · asked by sharr c 1

The Lincoln LS has been discontinued. But, I think the 3.9 L V8 that was optional (286 hp) would be great for the Ford 500. Yeah, I know fuel economy would be a little less, but there is a segment of the market that would definitely buy it.

2006-09-08 01:44:59 · 8 answers · asked by Eric H 4

Can the 96 Blazer's turn signal switch be replaced WITHOUT pulling the steering wheel, the column cover looks like it comes apart (top & bottom screw together)?

AND

Where on-line, can I pull up a diagram of the fuses under the dash on a 96 T-Bird?

Thanks ALL !

2006-09-08 00:46:22 · 2 answers · asked by mwolf1954 1

Found On Road Dead!!!

2006-09-07 18:11:00 · 25 answers · asked by SWISH 1

im upgrading the engine on my 62 ford ranchero... from a 170 inline to a 250... can i use the same distributer or do i have to buy a different one.. if so what size

2006-09-07 15:02:24 · 7 answers · asked by she 3

2006-09-07 11:18:41 · 2 answers · asked by cjone782000 2

the belt snaped on my ac compresser and took the wire harnes with it that goes to the ac clutch. all that is left is the wires wat wire is + and - on the ac compresser and where the wire hooks into the compresser, and what ford connecters are interchangeable to the compresser?

2006-09-07 11:18:26 · 3 answers · asked by dabomb_562000 2

i was told a 99 steering colum mustang was put in my 96. but the keys looked exactly the same. i know the 96's didnt have the key chip in it since i got a copy that worked from home depot. the 99's have a bigger key because of the chip. was the parts guy that did the install wrong? is it possible to put a 99 steering colum with chip recognition into a 96 that doesnt ?

jeff402006 u work for ford please help. people are giving me all messed up answers and dont know what they are talkin about.

2006-09-07 06:17:50 · 4 answers · asked by Anonymous

my car was stolen 2 months ago and i had to get a steering colum from a 99 mustang since they busted out the ignition cylinder. it worked and i lost the key while partying in lake havasu. the new key looked like the 96 key and it wasnt oversized with a computer chip in it that i knew of. i made copies of my old ignition at home depot and they worked. i have the vin # for both the old and new ignition. will the dealer be able to make me a copy? one dealer said anything 97' and older they can since they keep those records on file. can anyone help me in my situation? thanks

2006-09-07 04:21:41 · 3 answers · asked by Anonymous

it has an anti-theft system instaled but i dont know if that means there should be a keyless entry system also

2006-09-06 19:32:17 · 6 answers · asked by jess_kourt_mady 1