Ford

I think the Ford Pinto is a 70's classic where can I buy this car I'm not sure if those rumors are true about the Ford Pinto explode when hit from the back but I wan't one?

2006-10-23 07:03:07 · 11 answers · asked by ken31pop 2

The back passenger side of my car rattles like it is going to fall apart when I am driving on bumpy roads. I can't hear it at high speeds and it only happens on that one side. What could this be? It was just in the shop last week and they didn't notice anything, but it's getting progressively worse. Please help me.

2006-10-23 02:38:47 · 7 answers · asked by Anonymous

The only part of the dash board that lights up is the top of the speedometer from the 40MPH to the 70 MPH everything is out.

2006-10-23 01:12:13 · 11 answers · asked by fred g 1

I inherted a 1986 ford F150 with a 302 and 4 speed manual. Is it possible to change it out to a 5 speed overdrive? Is it a easy switch or will it work at all? The trans and clutch is starting to go so I was wondering to change it out with the same or one with overdrive

2006-10-22 16:03:44 · 3 answers · asked by dornewassj4 2

Only happens sometimes and is fixed by getting off the gas and then giving it a lot more gas. Then it runs fine. Also seems to jump when I am stopped at a stop sign, I can feel the car jumping a little. Oil filter, air filter, plugs/wires all up to date. Tranny fluid is good. I saw this stuff at Walmart, Tranny cleaner, in a Gel form, would it be worth trying or am I looking at a getting a new transmission?

2006-10-22 15:53:07 · 6 answers · asked by Anonymous

2006-10-22 15:04:31 · 5 answers · asked by Anonymous

Or if you know the bolt pattern that would help. Thanks!

2006-10-22 13:52:57 · 5 answers · asked by jamisgt 2

4.0 ohv AWD just cleaned the MAF and everything was fine,then....the howling began right at the sensor.I took apart the shroud with it running and it sounds like its somehow causing the noise.Could it be further up?

2006-10-22 11:26:44 · 4 answers · asked by crankyspanky 2

2006-10-22 07:09:17 · 7 answers · asked by Robert A 1

http://cgi.ebay.com/ebaymotors/NEW-FORD-COMP-CAMS-HIGH-ENERGY-ROCKER-ARMS_W0QQcmdZViewItemQQcategoryZ33624QQihZ015QQitemZ250039777812QQrdZ1
anyone know if I can use these with out guide plates?

2006-10-22 06:11:45 · 4 answers · asked by Anonymous

how do you bleed the fuel lines on a 1989 ford pickup after installing new gas tank, fuel pump external fuel pump and filter oil censor switch? still will not start there is spark but no gas flow also checked the inertia switch was backing truck up last year and just died nothing after that

2006-10-22 02:24:29 · 11 answers · asked by luanne d 1

There is a guy here at my job talks crap about my capri which he owns about 4 mustangs. He's telling me to get a real mustang and what the heck I dont care what car it is. Just as long its a Ford product with a V8 and its easy to make fast. Ive owned more mustangs than this moron shoot I got the capri for free so I couldn't pass up a deal like that. Mustangs are my life and Im in the market for a mustang as soon as I get my 1st paycheck from my new job thats coming soon. Dang I just want to shut him up I never once thought just because I have a fox car im cool.

2006-10-21 23:03:19 · 12 answers · asked by Anonymous

im 17 and if thinking now about getting a 1.6 escort but my quotes are all around £3500 does any 1 know of a good 1 for modified cars also whats the law on nos thanks sean g

2006-10-21 21:10:17 · 4 answers · asked by cosworthrep 1

Are there any other major issues with this model of Crown Vic? Thanks.

2006-10-21 17:45:30 · 4 answers · asked by DJ 3

2006-10-21 16:09:59 · 5 answers · asked by a-drummer 1

I went to a Ford dealership today and test drove a 2005 Ford Escape. This vehicle was very similar to what I drive now which is a Ford Ranger. I really liked it and it was very roomy but the price seemed a little steep for a vehicle that was almost 2 years old and had 30,000 miles on it. They wanted 18,000 which was the sticker price. I'm also wondering how reliable it is because my friend has a 2001 Ford Escape and the brakes go out on it very fast. I just don't want to put money into something that is gonna cost more in the long run.

2006-10-21 12:52:47 · 9 answers · asked by Anonymous

My explorer stalls and now wont stay running for more than a minute.Then it wont start at all.I wait a while and it will start again for a minute.(should the IAC valve be closed between the tubes?Mine isnt)Cleaned it and it still happens as if I just turned it off.Happens at Idle,revved up,in gear, gas cap on and off. Any advice? Thanks

2006-10-21 12:39:54 · 5 answers · asked by crankyspanky 2

2006-10-21 11:42:21 · 5 answers · asked by dontknowutmynaturalhaircoloris 1

2006-10-21 11:41:59 · 6 answers · asked by Pat 1

2006-10-21 10:57:15 · 4 answers · asked by p 2

we have replaced fuel pump assembly and gas tank external fuel pump oil pressure switch and still wont start will turn over and if youput fuel in the injectors it starts and stop immediaty the relay switch is set properly any suggestions thanks

2006-10-21 09:40:09 · 11 answers · asked by luanne d 1

ok sorry to keep posting so if i got the the hydraulic roller lifters without the vertical bar will i end up having to get the bars from somewhere

2006-10-21 09:22:31 · 3 answers · asked by slick 50 1

hi i am confused could someone tell me the difference between hydraulic roller lifters with the vertical bar attached and the hydraulic roller lifters without the bar attached

2006-10-21 08:41:20 · 4 answers · asked by slick 50 1

2006-10-21 07:51:38 · 2 answers · asked by garymunich 1

Looking for distributor and coil. Please cite sources. Also need plastic formed dash cap cover for 72 LTD. Not a rug !

2006-10-21 03:16:11 · 3 answers · asked by James B 2

2006-10-20 12:31:31 · 16 answers · asked by Anonymous

2006-10-20 12:17:39 · 7 answers · asked by Anonymous

2006-10-20 11:15:30 · 4 answers · asked by Taj u 2

2006-10-20 07:18:02 · 18 answers · asked by kateboyz7 1

I have a 93 mondeo recently the cambelt went causing the valves to bend against the pistons so i had the head replaced, but since then the radiator went, i replaced it today only for the new one to go aswell within minutes of warming up and the bottom of the radiator has bowed down also when i took the expansion tank cap off when cold to top it up this morning it was still preasureised.

need car back on road asap so any sugestions as to problem would be greatly appreciated

pps, the heating in car kept going hot and cold even though heating was on high setting

2006-10-20 05:33:43 · 18 answers · asked by Grizley Bear 3