My explorer stalls and now wont stay running for more than a minute.Then it wont start at all.I wait a while and it will start again for a minute.(should the IAC valve be closed between the tubes?Mine isnt)Cleaned it and it still happens as if I just turned it off.Happens at Idle,revved up,in gear, gas cap on and off. Any advice? Thanks
2006-10-21 12:39:54 · 5 answers · asked by crankyspanky 2 in Cars & Transportation ➔ Car Makes ➔ Ford
Check the Mass Airflow sensor at the start of the inake tube, behind the airfilter. Any debris at all in the fins or sensor lead will fool the sensor and stall you out. Also good idea to clean out the throttle body on those.good luck
2006-10-21 12:50:42 · answer #1 · answered by ? 3 · 0⤊ 0⤋
I would think the IAC is bad, try tapping it with a hammer, dont beat it just tap it it keeps running then its bad and needs replacing
2006-10-22 20:09:12 · answer #2 · answered by Josh S 7 · 0⤊ 0⤋
I would totally agree with ed.
Not all trouble codes turn the check engine lite on.
Put a code reader on it.
2006-10-21 22:53:54 · answer #3 · answered by tronary 7 · 0⤊ 0⤋
after mas check temp sensor then ck the oxygen sensor.. has it ever been tuned up? could just be plugs or wires or cap&rotor...
2006-10-21 20:13:34 · answer #4 · answered by Anonymous · 0⤊ 0⤋
get a code scanner :)
2006-10-21 20:15:25 · answer #5 · answered by Anonymous · 0⤊ 0⤋