Printers

how long does a laser colour toner last? and a black & white toner

2006-06-19 22:54:09 · 3 answers · asked by GazzaG 2

Paper does not say it is Laser paper.

2006-06-19 04:10:00 · 6 answers · asked by Bill 1

Just last night, and then again this morning, as soon as the printer stopped printing the computer crashed. The tray at the bottom of the screen showed the Printer to be active. It usually disappears at the end of a print job.
My computer would not turn off so rebooting is out of the question.
I know it is bad for the computer, but I wound up having to unplug everything, then start it up again.
What can I do and how do I do it?
Thank you'
Hope

2006-06-18 07:11:43 · 5 answers · asked by Anonymous

2006-06-18 02:04:00 · 3 answers · asked by wafik 1

My pixma IP1000 has messages "Waste Ink Full"

I try to reset with manual service mode :

- Turn off the printer, and disconnect the printer cable
- Press and hold the POWER button, turn on the printer
- The Indicator (LED) should be green
- Press and release the RESUME button, the Indicator (LED) should be orange
- Press and release the RESUME button again, the Indicator (LED) should be green
- Release both button

After I try, it work successfull. But, when I turn off the printer and I turn on again It has messages "Waste Ink Full"

How can I solve this problem permanently?

2006-06-17 16:56:11 · 1 answers · asked by Irin 1

I have a Dell printer and was told it wont print if it doesnt have color ink.

2006-06-17 03:56:21 · 11 answers · asked by DamnInk 2

2006-06-17 01:14:24 · 5 answers · asked by sgarlata 1

jams, breaking down, unfriendly UI, noisy, messy, which brands to avoid etc. Bombs away.

2006-06-15 23:08:32 · 8 answers · asked by ytana9999 2

I have a desk jet printer. It is printing so slowly. It takes upto to 45 min printing and the paper comes out printed half the page.What is the problem?

2006-06-15 03:51:30 · 6 answers · asked by rasz 1

I am using photo paper, i have an hp 1500 series printer, i have a tricolor cartridge hp vivera 93 and a hp vivera photo cartridge 99 and I have it set to print on the right type of paper
I don't understand why there would be faint vertical lines in the photo

2006-06-14 15:54:39 · 5 answers · asked by sophie 1

I put in the wrong black cartridge, it slid over to the right under the molding and now its stuck and wont come back. It will mannually slide a little bit until it hits some kind of stop. Is there any way to get it to slide back to the middle?

2006-06-14 15:36:33 · 1 answers · asked by schaller2003 2

2006-06-14 02:31:50 · 3 answers · asked by r.brashears@verizon.net 1

But when I add full cartridges, it still tells me they're empty. Any quick, obvious ideas?

2006-06-14 02:06:48 · 6 answers · asked by innofthelasthomeinsolace 1

Despite my advice to do otherwise, my girls father allowed himself to be bullied by his girlfriend into buying a Dell Machine. OK, so it was her money, but still.

Anyway I have now been asked to get new cartridges for the Dell All in One 810 with part number JF333.

The cheapest I can find is £18.99, which is ridiculous considering after postage this put the price up to half of what a new printer would cost.

Does anyone know of a place that sell compatible cartridges for this machine, or do I simply say "£18.99 plus postage? or I'll get you an Epson that I know has cheap third party cartridges"

2006-06-13 23:39:41 · 2 answers · asked by stew_redhill 3

2006-06-13 18:30:24 · 4 answers · asked by stagescott 1

Every time I start my computer, it goes through the process of "finding" and "installing" my HP PSC 1350 All-In-One printer. It works fine when I try to print something, but is just a little annoying to have to sit and wait for it to do that. What can be wrong?

(I have tried removing and re-installing, that did not fix it.)

2006-06-13 13:42:52 · 4 answers · asked by innocence faded 6

Everytime I buy ink for this lexmark printer, I always buys the lexmark brand name ink. But everytime I buy the stupid ink, and I don't use it more than a month, the flippin ink dries out, which infuriates me because those ink cost me a fortune.
I bought the printer mainly for printing school works, however, sometimes I use it to print high quality pictures with glossy and matte paper, other than that I print black and white, with low quality for paper works or school works. And if I use it to print for school work I use a 20lb quality paper, please help me.

With regards,

Drew.

2006-06-13 13:30:28 · 4 answers · asked by Anonymous

2006-06-12 02:05:18 · 2 answers · asked by mpython20000 1

2006-06-11 23:29:55 · 7 answers · asked by ulitimate4887 1

2006-06-11 22:41:48 · 6 answers · asked by jazzy4887 1

She's had problems with the output of her Canon Pixma IP3000 until I changed the print head. She believes the mfrs warnings and says the off-brand cartridges ruined the print head.

2006-06-11 17:13:44 · 15 answers · asked by Grayson 1

iam looking for one which doesnt use much ink and it should be affordable.
plz help

2006-06-10 17:23:33 · 5 answers · asked by champ 2

The darn thing isn't working at all because the "waste ink tank" is full. Sounds to me like it's a "waste printer."

2006-06-10 14:43:35 · 1 answers · asked by Isles1015 4

2006-06-10 00:42:25 · 2 answers · asked by njb2640 2

2006-06-09 15:21:30 · 2 answers · asked by DW 1

2006-06-09 14:44:54 · 4 answers · asked by DW 1

If I leave it out long enough? It's part of a wedding invitation and I don't want to rebuy all the invites.

I left them out overnight and they are still smudging...

2006-06-09 07:49:46 · 6 answers · asked by tdpm 2

2006-06-09 06:20:31 · 5 answers · asked by dandspach 2

What type cable connects a Compaq Presario V2000 with a HP Laserjet 1100 printer?
The HP does not use standard parallel, and my notebook uses mostly USB. (There's something called "Expansion Port", but I'm not sure if a printer cable would be compatible.)
Thanks
Vaughn

2006-06-09 04:51:13 · 4 answers · asked by VaughnCimini 1

2006-06-08 11:55:51 · 3 answers · asked by Anonymous