Ford

Am I RETARDED?? I mean until now the newest vehicle I have owned was a 94 Z24 and until now I have NEVER owned a Ford... My car is a v6 stick... Where is the clutch fluid Resevoir??(I know I totally mispelled that!) Does it even have one??? Please help....excuse my ignorance I feel totally stupid considering I change my own oil and do my own tune ups!! LOL

2007-03-26 13:03:56 · 10 answers · asked by Anonymous

I need to remove my water pump to replace the gasket, however there is a bracket on the same studs as the water pump. The bracket leads over to the power steering , and is behind the pulley. I want to remove the pulley so I can continue to remove it but having trouble getting it off.


The pulley goes to the serpentne belt, and is notched out in a hex shape for what appears to be for a allen wrench.

Can some one give me a idea on how to remove this pulley ?

2007-03-26 12:32:13 · 4 answers · asked by clone_marshal_bacara 2

I just got this truck and its awsome, it has 4wheel drive but im not sure how to operate it and im afraid to try anything for fear of breaking my transmisson. It has a gear shift in the floor and it has 2h 4h N 2L 4L and it has a switch/knob on the front wheels that have a free and locked positions. Im certian that the switch/knob on the front wheels have to be in a certian position to engage the 4wheels but im sure what to do with the gear shift in the floor. basicaly i need step by step instruction on how to operate my 4wheel drive. Any insight on this would be extremly helpful. A link to a web site or if it exist online the owners manual for that truck. Thank in advance.

2007-03-26 11:12:00 · 5 answers · asked by thealternativemind 3

are there any connect owners out there who can offer me advice on performance,reliability etc?

2007-03-26 11:03:43 · 5 answers · asked by kenny b 1

I changed the bat . conectors,alt,and bat . the bat is a little big but still fits. the bat gage is at about 8 volts when truck is running. what could be my problem pls. help.

2007-03-26 10:22:21 · 6 answers · asked by Anonymous

2007-03-26 10:11:51 · 7 answers · asked by Anonymous

Oh by the way fronts. Are there going to be any surpises? Or just a plain disc and pad swap?

2007-03-26 09:54:33 · 3 answers · asked by Tim K 1

I have put a 1996 Ford 460 motor & E4OD transmission with a 60 pin PCM in my motor home. Because of a space limitation I had to remove the tail shaft and bolt the transmission directly to the differential. This caused the loss of the Ford 20 tooth (VSS p/n E9LF-9E731-AA) and a Datcon magnetic (VSS p/n 71256-00) was installed in the differential..

There is a harsh shifting between first and second gear and the transmission control indicator lamp flashes. Is there a way to modify or reprogram the PCM to accept the magnetic vehicle speed sensor?

2007-03-26 08:36:37 · 2 answers · asked by hawgyshog 1

hi im buying a 1992 escort 1.6l mk 5 just wondering does is it zetec or cvh (its the cosworth shaped model)
regards sean also just wanting to know which as more tunning(modified)potential

2007-03-26 08:20:04 · 4 answers · asked by cosworthrep 1

Which do you prefer?

2007-03-26 08:08:38 · 8 answers · asked by Moose 6

2007-03-26 07:43:04 · 3 answers · asked by karenjohnm 1

anyone know where the conv. switch goes on a 69 stang?

2007-03-26 07:21:24 · 1 answers · asked by estee 1

2007-03-26 07:07:37 · 3 answers · asked by sheri r 1

They are not selling enough cars.

2007-03-26 05:36:35 · 14 answers · asked by Anonymous

Key-coded ford. I need a new drivers door lock, however, I have seen on ebay lock ste complete with transponder. Will this work if I swap them on my car? I dont want two keys for the car. Ford are charging too much for a replacment key!! Can anyone advise?
Thanks

2007-03-26 05:34:44 · 6 answers · asked by kippermanbike 2

DO ALL FOCUS MODELS HAVE FIRM/HARD
SUSPENSION OR IS IT JUST THE ZETEC ONES
MY ZETEC CLIMATE IS EXTREMELY HARD

2007-03-26 05:33:13 · 2 answers · asked by JOHN S 1

Recently the check engine light came on, along with after my speeds are over 65mph my pb ( power brakes) lights come on, along, with my traction control. I have had it looked at, but the mechanic said, not to worry about it. Now I'm having some sounds from my lifters clanking, can somebody tell me some good diagnoses on whats going on with this?

2007-03-26 05:00:26 · 2 answers · asked by Moose 6

OK so i am looking to buy a new carb. I want to be able to really puch it if i need to. I want that power. So any suggestions

2007-03-26 03:48:48 · 7 answers · asked by eortegaiii 1

I have a 1998 Mustang GT with 75,000 miles

2007-03-26 03:07:48 · 7 answers · asked by EL CHINGON DE DURANGO 2

How difficult is it to wire in a car alarm to a ford focus? My car is the 1999 cl version so its the basic one that doesn't come with an alarm. It does have an immobiliser but no remote lock or unlock, just standard keys with central locking.

My friends have told me I would have to mess with the box under the dash board which unlocks and locks the doors.

I'm not sure what alarm to get yet, I just need one really that provides wireless entry to the car with out the need to keep putting the key in the door, the alarm aspect is less important.

2007-03-26 02:55:00 · 1 answers · asked by Robert T 2

2007-03-26 02:09:11 · 7 answers · asked by Anonymous

2007-03-26 01:44:36 · 4 answers · asked by ZXC 1

2007-03-26 01:25:22 · 5 answers · asked by rasheed1416 1

I have a 2006 Ford Fusion which I dearly love. The only problem I have had with it is the gas cap which you have to line up and snap on. Apparently I wasn't doing it right and it quite snapping on. It was ON and wouldn't come off but it wasn't tight. Ford replaced it, of course. Well, now, about 6 months later, even though I was careful it has done it again. Again the "check fuel cap" light has come on (but over a week after it stopped working). So, my question is, will it harm my vehicle or is it dangerous if I leave it like it is? It's such a hassle to take it in to the dearlership!

2007-03-26 01:03:46 · 6 answers · asked by AKA FrogButt 7

I have a 1980 F100 pickup with a 300 in-line six cylinder engine. I'm not mechanically inclined and I'm tired of messing with manual transmissions and changing clutches. So, I'm wondering if an automatic transmission would work on it and if it would, what size would I need for it?

2007-03-25 22:27:08 · 4 answers · asked by krankit8 1

i live in the abilene tx area and am looking for a transmission for my car,even if it has to be shipped i have checked everywhere help please

2007-03-25 20:22:55 · 2 answers · asked by will79601 3

I actually have the engine so if anyone knows where I can buy the all parts needed to rebuild my existing engine that would be great.

2007-03-25 19:54:48 · 5 answers · asked by FRED F 1

the speedometer on my 98 stang is screwed.... most of the times it says i am doing 80....other times, 0....and every now and then it works correctly....what is the cause of this?

2007-03-25 19:49:05 · 2 answers · asked by Dak B 2

anyone have recommendations for performance or looks?

2007-03-25 19:27:33 · 6 answers · asked by Dak B 2

We are taking a trip and I am needing to know how many a Ford Freestar will seat. All will need to use a seatbelt. Thanks in advance for your help!

2007-03-25 16:56:24 · 4 answers · asked by dolphincutie 3