English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

Chevrolet

[Selected]: All categories Cars & Transportation Car Makes Chevrolet

Where can I get a 2008 Corvette dealer brochure? The dealers in my area don't have them and I really don't want to pay $20 for one from the scalpers on eBay. Anyone know where to get one?

2007-09-07 14:39:39 · 5 answers · asked by Patrick B 2

i am looking to buy a chevy 1500 and i want to put a 3" lift on it and also big off road tires. i do not want the tread to be too deep though, because the truck will be a daily driver as well as an off road fun truck. yall have any recomondations to a good tire for off roading? i do not want the tires bigger then 32" in diameter. the rim size is 16" diameter x 8" width. thanks

2007-09-07 13:12:08 · 3 answers · asked by bmxerkid243 2

2007-09-07 12:33:48 · 5 answers · asked by fawade23 1

2007-09-07 11:34:51 · 1 answers · asked by Jason J 1

I'm not sure what's wrong
but I blew the tranny pan gasket
and I mean catastrophic gasket failure, there are pieces hanging off the side of the pan
I'm not sure what caused this but I believe I have a coolant circulating problem STILL
I changed out the thermostat and with the radiator cap off and the truck running it does not appear to be flowing well, if at all
the fan is turning and the truck seems to run good with no mysterious noises
I was told by a NAPA guy that if I blew a head gasket it would prevent the coolant from circulating
If I'm not mistaken, then I would have coolant mixed in with my oil, I checked the dipstick and no evidence of that
Also wouldn't the truck run like garbage then?
I bought a new pan gasket and filter but I don't want to waste my time to fix it and it happens again because of some other problem.
somebody help me please!

Thanks,
Ryan

2007-09-07 09:11:53 · 4 answers · asked by stikclik 1

i want to put a chevy 305 into my camaro, it has the 3.1 v6 motor in it now, can i use the old tranny and just hook the motor too it?

2007-09-07 06:35:04 · 3 answers · asked by tarzan_man1990 2

Light continues to flash and I can not start my car until it stops.

2007-09-07 06:31:59 · 4 answers · asked by ERICA F 1

2008 Corvette

2007-09-07 01:33:10 · 11 answers · asked by Anonymous

2007-09-07 01:15:37 · 2 answers · asked by michelefassbinder 1

2007-09-07 00:23:17 · 4 answers · asked by smokeybutters 2

Z06 has like 500hp? And it doesn't cost anwhere close to other car at the same range of hp.
How does corvette do it? Where did they cut the cost?

2007-09-06 20:26:54 · 5 answers · asked by skjhlkj 1

After I Replaced/ Computer/Starter/Ignition Control Sensor/Spark Plugs/Fuel Filter/ Ignition Wires Set/ Battery
Still Won't Start.... Well To Be Honest With Yall I Did Run
For One Week But It Die on me several times but still start until the last time i drove crossing the rail road tracks it just died completely and after then i replaced the ignition wires
after 5 or 8 times that i tried to start it .. It Blow Out The Muffler When I Try To Start It You Can Only Smell Fuel But Dont Start ... It Spark Of Course But Won't Start ................

Someone Please Help Help Help Please
I Spent Over $500 Dollars Just On Parts.. i Also Checked The Fuel Pressure By The Ignition Wires connection And It
Shows Alot Pressure Took One Spark Plug Out And Came out With Some Oil What Is It ? Help Please Thanks

2007-09-06 17:05:03 · 5 answers · asked by masculino4u2002 1

I have a 2002 Chevrolet Silverado 4x4 (Z71 package) in need of new shock absorbers. I was wondering if I should stick with the OEM absorbers (which I've heard are actually pretty good) or go with an upgrade. I don't 4x a whole lot nor do I have a lift kit or bigger tires. But I do like quality items and I don't mind investing in my truck a little. So any reccomendations that won't drain my wallet completely?

2007-09-06 16:48:59 · 7 answers · asked by rioedgebravo 2

I am looking at a 1990 Chevy Celebrity station wagon with a 3.1 liter V6 with 109000 miles on it. Owned and maintained by 1 family since new. it has A/C, cruise, tilt wheel, power windows, power seats, power door locks. it is in good condition kelley blue book says in good condition private party resale value is $1,085, in excellent condition $1,240, in fair condition $805. trade in values are excellent $725, Good $645, Fair $485. it has all new tires and no rust. He is asking $1195. Should i offer him $900 and see if he accepts and if not i would offer him $1000. what do you experts out there think this car is worth?

2007-09-06 14:51:29 · 10 answers · asked by hermitofnorthdome 5

2007-09-06 10:58:26 · 4 answers · asked by Sly Imran 1

I'm just looking for some ideas on what color(s) to paint my truck, its a '92 Chevy K/C ext. cab, right now its black on the top and bottom and grey in the middle, i'm just looking to change it up a lil, or a lot what ever lol, i'm not getting it done professional, i'm just painting it with spray cans, so yeah any ideas would help alot thanks

2007-09-06 10:47:18 · 10 answers · asked by Anonymous

i have a 94 camaro stick shift trani, when the car is cold and i turn it on the engine sounds good but when i drive it for a while and the engine starts to heat up it makes a ticking sound pretty loud , is it my oil?

2007-09-06 10:47:11 · 4 answers · asked by memo b 1

2007-09-06 05:11:36 · 2 answers · asked by sadeqam 1

after start up the black smoke goes away

2007-09-06 02:48:40 · 5 answers · asked by ford f 1

I've heard between 9 and 11 psi. is this right?

2007-09-05 18:41:36 · 4 answers · asked by Anonymous

Everything in it to my knowledge is stock. I have been looking into it, it is a V6, and I am looking to get better performance at it, but don't know where to start.

2007-09-05 17:57:32 · 6 answers · asked by Paul L. 2

i have an 89 305 tbi camaro .well it ran good until i was told the dissy was bad ,wasn't (fuel pump) well after i ve replaced it this car runs like crap.doesn't want to time right doesnt want to stay running and when it is it has a little backfire out exhaust.

2007-09-05 15:40:02 · 9 answers · asked by Anonymous

I have a 1984 C-10 Chevy truck 2wd. When I press on the break pedal, it almost goes to the floor before the truck feels like its gonna stop. A couple weeks before the brakes squealed a little bit when Id stop but not now. What is the problem? Does my truck have drum brakes on front and back or disc and drum? Somebody please help me, I need to get it fixed in hurry!

2007-09-05 15:39:23 · 10 answers · asked by joshthebowhunter 1

I have a 1986 C/K chevy with a 350 small block. The proble is in the fuel getting to the motor. We changed fuel pumps on both sides in the tanks and the fuel filter any ideas what else it could be?

2007-09-05 15:23:05 · 5 answers · asked by Anonymous

We locked our truck with the alarm button, but have since lost the alarm pad. We have a key to open and start the vehicle, but do not know how to deactivate the alarm using the key only. I believe that there is a way to do this, can someone please help?

2007-09-05 02:10:36 · 2 answers · asked by Linda D 1

My mini-van is making even me, the driver, car sick! I need good shocks so I don't feel like I'm in a small boat instead of a land vehicle...we live on a dirt road with lots of twists and turns. The van has about 78,000 miles on it and I don't think the shocks have ever been changed.

2007-09-05 02:00:16 · 3 answers · asked by ramblerambler 2

2007-09-05 01:34:01 · 5 answers · asked by hungalime 1

Ok guys, I put a new distrubator in my S10 Blazer and I'm not sure if I set the rotor cap right in the right position, I had the # 1 piston in the up positon and set the rotor straight to the number 1wire on the cap (3 o'clock) but it won't start, I'm not sure if I have it set right, I'm not pro- mech so I really apreciate some help.

2007-09-04 15:12:19 · 6 answers · asked by Ralph C 1

fedest.com, questions and answers