English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

Chevrolet

[Selected]: All categories Cars & Transportation Car Makes Chevrolet

Well just for info, my brother and I are working on a '62 Bel Air.
As of now we are replacing full floor pans and such, but I have a few questions.
My first is about the interior.
I have looked for a few weeks, and I'm still unable to find a true reproduction of Bel Air door panels. (2 door sedan, specifically, color green)
I have found Impala door panels, but they are very different in design.
I would be greatful if someone could help me out on that.
Also, the car originally came with a straight 6 and an automatic transition.
My brother and I are planning on putting in a 5.7L 350 small block
with a 4 speed tranny.
Does anyone know if the modifications we have to do to the car are going to be too serious? i know that we'll have to chop a hole in the new floor and such, and shave the column shifter, but is it "safe" to change an automatic to a manual?
Don't get me wrong my brother knows what he's dealing with very well.
These questions are just for me, because I am very curious.

Thanks

2007-09-04 14:40:33 · 3 answers · asked by Monstah 2

thanks

2007-09-04 10:23:16 · 6 answers · asked by sara 2

All the people out there that have Cobalts, have you been expierencing problems with them?!?!?!

2007-09-04 08:45:11 · 5 answers · asked by Anonymous

2007-09-04 07:00:32 · 1 answers · asked by rnld_lws 1

I just want to no where the cabin air filter is?

2007-09-04 06:28:06 · 4 answers · asked by victor m 3

it usually says it has full tank but does not.it sometime starts working and says correct amount of fuel in tank.what could it be?

2007-09-04 05:41:52 · 6 answers · asked by ACE 1

We have a new battery......but when we turn the key (this happens more after we have drove it then shut it off) all we get is a clicking sound. Not like a dead battery click. It is like starter not engaging. You just keep turning the key till it catch's. Any clues how to fix this issue?

2007-09-04 01:34:43 · 7 answers · asked by kathleen_martin8 2

See for yourself mine is completely stock his is too..here a vid of the gauges

Mustang gt
http://youtube.com/watch?v=czXD9oY2tqk

Corvette

http://youtube.com/watch?v=q7j51CAKh3Q

2007-09-03 20:41:25 · 9 answers · asked by Samuel 1

well im making me a step side chevy truck and i was wondering if it would work if i put a 1972 chevy cab and short stepside bed on a 1974 chevy short bed frame. would i have to change mounts around or will it bolt right up? thanks

2007-09-03 15:42:25 · 10 answers · asked by timothy f 1

It is from 1960 -1970 (somewhere between that time period). which car's seats will be best for this?

2007-09-03 15:36:26 · 4 answers · asked by Stephen E 2

I plan on using the 93' long block 4.3L with the balance shaft but I need to remove the balance shaft for my 89' intake to fit properly. I just need to know if it can be done and what do I need to change for it to work i.e (camshaft, timing chain, etc.) any info would be helpful I do know that the intake gaskets and the exhaust gaskets are the same as on the 93' vortec motor but I need to know about the balance shaft Thanx

2007-09-03 15:21:03 · 3 answers · asked by Anonymous

2007-09-03 10:55:51 · 14 answers · asked by Anonymous

2003 blazer overheating unless I turn on the heater...? pulling a uhaul trailer also (4x8).....?

2007-09-03 05:37:22 · 7 answers · asked by finappy 1

THWY WORK FINE UNTIL HEADLIGHTS ARE ON THEN THEY GO OUT WHEN BRAKE IS APPLIED 2001 CHEVY VAN 3500

2007-09-03 04:47:47 · 3 answers · asked by THOMAS C 1

2007-09-03 04:12:00 · 2 answers · asked by towanda f 1

i just wanna know because i cant seem to find a price on it anywere dont foreget the 2009 model

2007-09-03 01:04:35 · 7 answers · asked by bikeboyadam 1

i have a 1993 camaro z-28 lt1 motor i took it to get it smoged and they told me it didnt pass cause of alot of fumes what can the probleme be?

2007-09-02 15:09:42 · 8 answers · asked by Anonymous

When it cools for about 20 minutes,it will start run and die as soon as it heats back up.I noticed coolant lines that run to the throttle body.Could the attached sensors be weak and failing because of heat?There are two.One flat and one round,I dont know their names or what they do.Any help appriciated.
Thanks

2007-09-02 13:37:32 · 6 answers · asked by Rock Quarry 3

2007-09-02 12:12:20 · 7 answers · asked by Anonymous

1999 Chevrolet Venture

2007-09-02 10:42:14 · 10 answers · asked by waaaaaac 3

2007-09-01 17:49:35 · 2 answers · asked by miamivc 1

is it a good, reliable car? the one i am thinking of buying is a 1996 and only has 43500 miles. this will be my first car and i only need it to last me about 5-7 years without any major problems, or any problems preferably

2007-09-01 12:33:52 · 5 answers · asked by Anonymous

we replaced 3 of the lines and need to know the bleeding sequence? ty

2007-09-01 03:54:30 · 4 answers · asked by cell4168 3

2007-09-01 03:12:22 · 2 answers · asked by D flash 1

i had a girlfriend that worked there as an 89'r. meaning if you worked there for 89 days without a problem, then you were to be hired permenantly. when she reached that goal they changed the rule. does anybody know other stories like this?

2007-08-31 18:30:30 · 4 answers · asked by Anonymous

fedest.com, questions and answers