Chevrolet

2007-10-08 04:44:02 · 2 answers · asked by alex 1

Okay my boss has me searching around for I don't even know what and neither does he, but i have to find it!!! He has a red 59 corvette and he's telling me he needs the chrome trim piece in the middle of the seats replaced. I guess i have two questions, does anyone know where i can find pictures of this kind of vehicle to where it might show the back of the seats (all the interior views i find are of the dash and everything, i need pics of the seats so i can see that middle part) so i can know what this piece he's talking about looks like? Also if anyone may know of good websites to fine some older corvetter parts?

2007-10-08 03:42:56 · 3 answers · asked by Anonymous

I have been looking, one claimed that it is thicker, so can provide better seal and also increase compression pressure. Is it true?

2007-10-08 03:29:04 · 5 answers · asked by James1982 2

2007-10-08 01:42:49 · 1 answers · asked by Anonymous

I have decided to take my 1989 chevy caprice to the max. It currently has a 305 engine with about 95,000 supposedly original miles on it that runs fine but im not really impressed. I want to begin planning on an engine swap but really don't know much about it. Should i try to have it rebuilt into a 350? Is that even possible? Will i have to rebuilt the transmission too? What about suspension? Are there any resources online where i can do comprehensive research? Any comments and suggestions are welcome. How much am i loking at?

2007-10-07 17:35:45 · 7 answers · asked by chevytoglory 1

I got a 350 Chevy engine, the timing chain was Verry loose, were u could move it alot...so i replaced the timing chain and the camshaft gear..i didnt replace the crankshaft gear ''smaller gear on bottom'' and i have the motor running it runs good in park but *** soon as u put it in gear its like it dont have no Power...wont even brake tork it...carb is good on it...trans is good.... *Note* the Vac. Advance on the Dist. is turned all the way clockwise ''Vac. Advance is facing Passenger front seat''....i kno its way too far advanced but that the only way it will start......does anybody know if not replacing the crankshaft gear will effect the engines power......PLEASE HELP!!!

2007-10-07 17:34:57 · 3 answers · asked by dinkrdsw313 2

what would the insurance rate be on a 15 year old male for a 2005 chevrolet corvette coupe? this is the first car for him also.

2007-10-07 15:08:10 · 11 answers · asked by boredashell 1

The manual that we have now are crap, and we need a more detailed manual, perferably free but if I have to download it or buy it I will. This is my grandpa's old truck that we are working on. It used to be owned by the Territory of Alaska Dept. of Transportation work truck. Any help is appreciated.

2007-10-07 12:24:48 · 10 answers · asked by jslewis81 2

2007-10-07 09:55:09 · 6 answers · asked by Ray O 1

checked the starter checked the batt cables checked the ground checked the wires checked the fuses. we put the motor back in the truck. it cranked for a couple mins then it didnt do **** the dome light and headlights was working now everything is dead everything looks like it should but not getting any results can anyone give me some leads?

2007-10-07 08:37:25 · 5 answers · asked by nick b 1

hair i have left...aint no corvette techs anywhere near me...For Heavens sake can anyone tell me why the wiper panel pops up when i switch the car off...wipers work fine when car is running panel up and down when wiper switch is turned on...otherwise: 1 1970 corvette for sale ..going cheap.slight vacuum problem.

2007-10-07 04:03:56 · 4 answers · asked by Master H 1

2007-10-06 09:38:06 · 1 answers · asked by gordon 24 3

I recently snapped the key off in the ignition of my truck, and have had 2 locksmiths, and 2 friends out who know what they are doing, but none could get the key out. its jammed in there pretty tight. so one of my friends reccomended that I drill out the lock with a drill, and then use a screwdriver to start/stop the truck. Its a 1993 Chevy silverado, with tilt steering, and cruise control. dont' know if that helps...

Thanks in advance!

2007-10-06 08:36:54 · 4 answers · asked by Anonymous

I have a '99 silverado (new '99) and it is making a squeaking noise under the front when I am driving around 10-30 mph and then it goes away. The noise is coming from the wheels, I am thinking it is either the brake pads or retainers dragging or wheel bearings going out. Can anyone give me troubleshooting advise on this to find out what it is? How much does it take to replace the wheel bearings, does the whole hub have to be replaced costing tons of money or can just the bearings be replaced?

2007-10-06 05:42:56 · 5 answers · asked by james_spader_jr 3

On putting the distributor in and setting up timing: I put it on TDC #1 compression stroke, drop in the distributor and have the rotor pointed at #1 to fire. On cranking, it backfires through the intake. Obviously the valves are opening at the wrong time. What am I missing? Any help from fellow gearheads appreciated!

2007-10-06 05:21:07 · 2 answers · asked by Greg G 2

2007-10-05 17:26:07 · 3 answers · asked by michael r 1

please note i am in australia and cant get one without great expense and time

2007-10-05 17:12:27 · 6 answers · asked by Master H 1

I'm planning on installing a performance programmer made by SuperChips on my 2005 Chevy Silverado that's still under warranty. Will it void my warranty by doing so?

2007-10-05 12:35:24 · 6 answers · asked by FracHand 2

I'm getting an 07 Chevy Cobalt on Monday, I can't wait! Do you have one, is it a good car? My husband sells Chevy, so I wouldn't get anything else but a GM vehicle.

2007-10-05 10:19:32 · 5 answers · asked by Anonymous

Been working on a 93 chevy with the 350. No spark. I changed the coil and checked the rotor and cap, they look ok. I think the coil is putting out spark, but I didn't have nerve enough to hold it! lol! How can I check the coil with a multi meter? What else can I check?
Thanks

2007-10-04 16:44:44 · 12 answers · asked by chenson45 2

I have tried putting a pin in the pin hole, but it didn't work. Does anybody have any suggestions?

2007-10-04 13:53:46 · 4 answers · asked by Terry S 2

i have a 1989 chevy camaro 5 speed..

2007-10-04 06:28:57 · 9 answers · asked by Anonymous

2007-10-04 01:10:44 · 5 answers · asked by Joyce 2

a 10 passenger Chevy Suburban? looks like they only make them in 9 passenger... I thought they used to make them with more seating than that.

2007-10-03 20:58:20 · 5 answers · asked by Armyvet 6

Ok, I just bought this car and have yet to get used to the concept of two keys apparently. I am blaming this on my "dumb girl" genes.

I inserted the door key into the ignition by mistake. Once I turned it over (why did that work anyway???) the car started but the anti-theft system kicked in. Now the ignition switch is locked. I can not turn the key back to "off" in order to remove it. I have tried starting the car, waiting ten minutes to see if the anti-theft system will reset, but that is not working. I disconnected the battery and reconnected, zip.

I REALLY NEED HELP!!!!!!

2007-10-03 14:23:49 · 3 answers · asked by jennydatray 1

I want to make a sleeper out of my 1993 Camaro. I have a 3.4l V6 and I want to get roughly 400 hp out of it w/out doing a whole lot of modifications to it if at all possible? What is the best motor to go with or what can I do the the motor to increase the horse power?

2007-10-03 14:16:58 · 8 answers · asked by nightoftheblackmoon_68 1

I have a 1993 Camaro LS1 3.4l V6 and I want to know if I can swap out the motor and put a diesel engine in instead and if so what will I need to do to make the swap work?

2007-10-03 13:35:51 · 10 answers · asked by nightoftheblackmoon_68 1

I have a 1991 Chevy K1500 with a 350 in it. The block is from an '81 and the truck has been run hard. I fixed a problem with my fuel pump a few days ago and it has been running like never before. But now, every time I let off the gas, the oil pressure gauge drops to 0 and my "Check gauges" light comes on. It also stays a little low, especially when I get on it. I'm thinking maybe the sending unit, oil pump, clogged filter, or maybe a messed up bearing. Any ideas?

2007-10-03 13:20:09 · 5 answers · asked by Evan 2

2007-10-03 12:54:15 · 3 answers · asked by Anonymous

I have been looking for the distributor for this truck for about 2 months and I just can't find it. It is getting more and more frustrating but I just won't give up. Please would any body help me????
It seems it was only built for a couple of years and the spare parts have all but gone.

2007-10-03 12:24:47 · 4 answers · asked by toroboltan 2