Chevrolet

2007-10-24 05:07:22 · 2 answers · asked by spiritguide1963 1

2007-10-24 04:01:00 · 2 answers · asked by KENNY H 1

'm thinking about getting a Chevrolet Cobalt Coupe 07'. Kepp in mind that i'm 18, almost 19. Is this a good car for someone my age? And yes, I'm on a budget :) Thanks.

And if they offer that 100,000 mile warranty, shouldn't it be good?

2007-10-23 16:16:05 · 7 answers · asked by Anonymous

Right now I am looking at buying a 350 V8 that was pulled from a 1970 Corvette. However, I would like to know what I am getting myself into before I throw some money down towards that engine. I know that it won't be simple, but I have no clue what exactly would need changed. Oh and the V6 is a TBI. Thank you and I appreciate your advise.

2007-10-23 11:38:12 · 4 answers · asked by Anonymous

Where can i find Wiring diagrams for my Chevy HHR? I'm looking for FREE wiring diagrams. I know alldata has them for 29.95, but there has to be a place that has them for free? I know they are in the auto stores in the manuals they sell, but i'm not sure they make one for my car yet, haven't checked into that yet, and probably will tonight.

2007-10-23 02:27:32 · 4 answers · asked by nxlking2304 1

does anybody know where i can find OEM fog lights for my Chevy HHR 2007? I'm looking for a perfect fit and the real deal switch that is meant for my car, not the aftermarket? Chevy told me you can't get this, but i find that really hard to believe?

2007-10-23 02:25:36 · 3 answers · asked by nxlking2304 1

I changed the starter and it still making that whinning noise.
Is it a shade tree mechanic type thing. Any fluids to replace or calibration.

2007-10-23 02:09:07 · 6 answers · asked by Anonymous

I changed the starter and it still making that whinning noise.
Is it a shade tree mechanic type thing. Any fluids to replace or calibration.

2007-10-23 02:08:44 · 5 answers · asked by Anonymous

Im looking to race so the faster the engine the better

2007-10-22 17:26:40 · 10 answers · asked by ace_of_spades 1

it would be a 2002 model even though that shouldn't matter...please help. =)

2007-10-22 16:42:56 · 5 answers · asked by alienate_me_baby 1

well i want your opinion because i'm just not sure... should i keep 5 bolt axles or convert to 3/4ton 6 bolt??? i'm dropin a hopped up 454 eventually and wanna run prob about 34 inch tires. can i make the 1/2 system i have bullet proof without spending a mint? and while i have you..... what you think of blocks used for raising the rear end.. recommend i just spend the money and get the leaf springs??

2007-10-22 16:30:14 · 5 answers · asked by bigbluetarger 2

i have a 1997 chevy 1500 (i just bought). it seems to run great (144,000) but the fuel pump has a real distinctive whine going on. is this normal?

2007-10-22 16:22:24 · 8 answers · asked by bubby 1

2007-10-22 14:56:48 · 4 answers · asked by saytownboy21 1

Ok, i have a 98 pontiac trans am and a 94 Chevy silverado 1500. They both have 5 lug bolt patterns will the rims interchange... And Is the Chevy S10 bolt pattern the same also or is it different? thanks

2007-10-22 13:05:43 · 5 answers · asked by SPEEDY 4

I have a 1996 chevy impala ss and i want to change the stock rims for 26 inches or bigger. i want to know how it will effect cornering, speed, handiling, aerodinamics, etc. please help before i buy these $13,000 rims!

2007-10-22 07:44:07 · 9 answers · asked by Quay 2

I am looking to buy a 2001 Corvette but I have looked at some that say "this one does not burn oil like most 2001 vettes" So am I safe to assume that all 01's burn oil? Is it just this specific year? Thanks!

2007-10-22 05:18:24 · 10 answers · asked by eij2ceij2c 2

no hot air coming from heater, thermostat has been changed.

2007-10-22 04:24:23 · 6 answers · asked by James D 1

my front driver seat broke, it now will not support itself, it just falls back. on the side closest to the door the metal piece has come disconnected and the bolts have snapped. do i have to replace the whole seat or can i just get that metal piece that connects the back and bottom part of the seat?

2007-10-22 01:05:40 · 1 answers · asked by Jim 1

after knock started i replaced the oil pump oil pan gasket,rod bearings...this doesnt knock all the time mainly at an idile or at a low speed but still no oil pressure

2007-10-21 18:28:12 · 3 answers · asked by gijoe2971 1

I'm somewhat interested in them, but haven't driven one yet. I was surprised to see that, until the 2008 alpha, they didn't have a V8 option. They only came with chevy's 5 cylinder. I think it has something like 220 hp and 230 pft of torque, which isn't bad, but that small engine seems like so little for such a large vehicle. I'm driving a grand cherokee with an inline 6 right now, and it feels pretty underpowered itself, but its also considerably smaller with a similiar powered engine. I'm worried that the H3 is even worse. Wha are your opinions?

2007-10-21 16:42:30 · 5 answers · asked by nipsy3 2

i got it all apart but cant get the rods off is there a special tool to do that plise help

2007-10-21 14:39:56 · 1 answers · asked by bigboy44mag 1

2007-10-21 13:48:30 · 8 answers · asked by Anonymous

im considering buying one

2007-10-21 12:17:18 · 3 answers · asked by eric b 1

- 2000 chevrolet cavalier 4 door sedan -
The first company I checked with gave me a quote of $233.95 for a front windshield.
Is that a good price or is there anything cheaper?

And what about tinting glass? Someone told me it costs $180

2007-10-21 10:45:00 · 4 answers · asked by Luby 5

Hi there
I just installed a 2001 4.3, V6 vortec in my 1996 Chevy blazer s10, the original engine was 4.3, V6 vortec but the sucker will not start. MY fuel pump and relay work, no fuses blown, every harness and ground connected, ground voltage low but can not find from where. I checked and found out the fuel injection system has no ground power and when I put starter fluid in the throttle body its starts right up then shuts off this issue is electrical so if anyone knows about it could please get some info.

2007-10-20 10:12:55 · 7 answers · asked by DIEGO 1

I have a 1996 4.3 v6 vortec chevy blazer s10 with high mileage, so got a hold of a 2001 4.3 v6 vortec with tanny. Will it fit completely with no issues and run?

2007-10-20 07:31:53 · 8 answers · asked by DIEGO 1

It's a 1994 Chevy Silverado K1500, 4x4, Club Cab, 8' Bed, 5.7L V-8, Factory Tow Package, Cap, Not sure about the gear ratio yet or the wheelbase.

2007-10-20 06:59:55 · 4 answers · asked by Harvest 3

2007-10-20 06:40:26 · 3 answers · asked by michaeL J 2

Two days ago my check engine light came on; on my way to the mechanic the next day it turned off. So I went on using it then later on that day the car was just running on the drive way and started to over heat. I want to take it to the mechanic but I cant get it to go wrong again. Any ideas!?!
by the way the car just hit 40000miles

2007-10-20 01:09:01 · 3 answers · asked by Jay77 2

4 Chevy Lovers

2007-10-19 23:38:26 · 10 answers · asked by who 5