Chevrolet

2006-10-28 15:35:27 · 5 answers · asked by angelchild130 1

2006-10-28 15:29:34 · 4 answers · asked by Rick P 1

I have a mouse in my car, specifically in the heater box or/and heater duct work.?

when i turn the heater on it makes a whining noise like its being restricted, plus i hear a bunch of crap moving around in there that sound like little pine nuts or something, and finally to top it off there is a awful smell associated with it coming thru the vents. arrrrrrrrggghhhhhh--i should have know better i had the car parked in the garage with my snowmobile and they alreay ate the air filter on my sled, now this--grrrrrrrrrr--PLEASE HELP!!!!! The Car is a 1994 Caprice Classic

2006-10-28 14:09:07 · 13 answers · asked by Drew 27 1

2006-10-28 13:23:19 · 4 answers · asked by Anonymous

when you turn on the heat there are three little door things (I don't know what they are called). One blows at you, one blows at your feet, and one is the defroster. The one used to defrost the windows blows are but not as strongly as the others but it stays partially shut. Could you explain the detailed steps of fixing this and what to do, that would be a big a help thanks.

2006-10-28 12:11:18 · 6 answers · asked by dyyylannn 4

2006-10-28 11:22:23 · 7 answers · asked by Chad S 1

There was also no detent cable on this set up. Just a vacuum plug over the rod in the trans housing.I did a little interstate run in the truck like this. Would a missing cable cause a totals trans meltdown?

2006-10-28 07:17:00 · 3 answers · asked by Reuben 1

motor instead of droping the gas tank and replacing the one in their it be alot easier if it is possible

2006-10-28 06:53:35 · 10 answers · asked by Anonymous

2006-10-28 06:09:03 · 4 answers · asked by newgmc 1

i have a chevrolet lumina apv 1991 and i live in Iraq.
all sites that i have visited (by search) do not give me free repairing information and i have not found any online site about (do it yourself) stuff
because i live in Iraq, in a country area that doesn't have any way of transferring money, i have to search for free web sites
and because of the situation now in this country, the web is my only way to search for information
thank you for your help

2006-10-28 05:35:22 · 4 answers · asked by iyas 1

Does more spacer engage the starter into the fly more or does it take the starter away from the flywheel the starter seems to turn on the teeth and not engaging into the flywheel fully as of now there is no spacers this is the 4th starter dong the same thing. I have gotter 2 answer and they both disagree with each other .

2006-10-28 03:41:03 · 10 answers · asked by rfurlough1red 1

2006-10-27 12:42:46 · 19 answers · asked by *chess-geek* 1

I have a 1994 chevy camaro. 3.4L V6. it has dual cat-back exhaust and a tornado. what is the cheapest and easiest way to add more horse power?!

2006-10-27 08:31:02 · 18 answers · asked by musclecarlover 1

I have a warning light on my 95 camero that looks like a low water light...My water, washer fluid and oil is fine. My car isn't overheating and is running good. The fuse is also good. What else could this light be? I't looks like a battery with an arrow pointing down to low water.Do I have to put water in my Battery???? I have no clue Please help!!!!

2006-10-27 07:55:49 · 10 answers · asked by jasminelexy 1

2006-10-27 02:32:10 · 12 answers · asked by young_7_sexy 1

What are the distinguishing features of the Chevy Impala, the Bel-Aire,and the Biscain.

2006-10-26 23:04:28 · 7 answers · asked by dewhatulike 5

2006-10-26 19:37:53 · 3 answers · asked by reinadelaz 6

SS WHAT DOES IT STAND FOR

THANK YOU IN ADVANCE IF YOU ANSWER FAST....

2006-10-26 18:22:45 · 38 answers · asked by ipolady 2

2006-10-26 17:11:23 · 18 answers · asked by Anonymous

hurting the alternator? How will I know? Does the "nest material" from the mice have to come out of the alternator? This alternator has air vents, and thus the mice got into it. It's running fine so far, but this is a nice car, and I want to make sure.

2006-10-26 15:22:04 · 9 answers · asked by MrZ 6

1993 Chevy Lumina 3.1 intermittent stalling problem. New gas tank, fuel pump, control module, 3 new coils, plugs, wires, IAC valve, fuel and air filters. Good pressure at the fuel rail. Car stalls under different circumstances (at idle, driving 50, slowing to a stop). OBD shows a 12 (handshake) code and nothing else. Any ideas?

When it dies, sometimes it restarts right away, sometime I have to wait for a few minutes.

2006-10-26 12:51:04 · 6 answers · asked by john_stolworthy 6

Heyya folks.
I got this die-hard Ford fan buddy of mine and some where, some place he got this idea that Ford was or is in the process of buying Chevy. Seeing as how Ford is having financial trouble as it is, how can they possibly do this?
I've done a preliminary search on the internet and I haven't found anything. If anyone here can give me evidence of "Ford buying Chevy", I'd appreciate it, as I'm going to send my buddy an e mail to the contrary, and tell him his uneducated hick rump is full of pig excrement.

2006-10-26 04:08:22 · 16 answers · asked by Ryan 4

flat rate on a heater core 03 chevy silverado with air

2006-10-25 17:37:29 · 4 answers · asked by skintknucles 2

I just bought it and the previous owner sooped it up w/ a 350(stock out of a 1 ton chevy van), and a TH350 trans. It has a 650 cfm Holley 4 bbl on it. I was wondering, how hard would it be to swap out that motor for an MFI LT1 350 from a Chevy Caprice police car? Those are crazy fast...and they take so much abuse. How hard would it be to wire up the fuel injection and the ECU? And would i have to get a different radiator for the reverse flow cooling system?

2006-10-25 16:39:07 · 4 answers · asked by Anonymous

2006-10-25 15:13:07 · 18 answers · asked by suprise 1

2006-10-25 13:58:19 · 12 answers · asked by badboyjr3172006 1

2006-10-25 12:11:31 · 2 answers · asked by cooter85 1

I took it to auto zone and the guy did that little test thing to find out what's wrong with it..turns out I needed a new gas cap.But after buying the new gas cap I'm still seeing the service engine light come on.What could be the problem? Could it be the gas that I'm using?It's a 2002 Chevy Blazer.What do you think is wrong?

2006-10-25 06:05:22 · 13 answers · asked by FLORIDA 4

reverse works well and the forward gears were lost gradually but speedo immediatly,

2006-10-25 03:55:03 · 7 answers · asked by harrydc1 1

The clicking noise is not present when idoling.

2006-10-25 02:24:28 · 10 answers · asked by Anonymous