Car Audio

I got a brand new Audiobahn Amp in 2003. I know it is 1000 Watts but someone hooked it up wrong and it has a small part where a cord goes in that melted. It works perfectly fine though. I bought the Amp and Speakers for $1200 altogether but I don't remember what they were seperatly. How much can I get out of it?

2007-03-07 12:13:00 · 5 answers · asked by Brie 2

why does it matter to her? not like its her car. who cares, i am a girl and i dont need 6000 watts of bass to destroy my hearing. im not flashy i dont care if people hear me before they see me.

2007-03-07 11:59:45 · 2 answers · asked by MiaDiva28 6

as-is. What does that mean?

2007-03-07 08:32:02 · 7 answers · asked by tai_mai_shu_sr07 2

2007-03-07 08:07:29 · 10 answers · asked by dragon_fire_202 1

2007-03-07 06:56:19 · 5 answers · asked by lilshoe27 1

please help me! i don't know anything about systems. i want to know how many watts and what other specifications do i need to look at for the amp. I want it to sound good. I purchased 2 Kenwood KFC-W3011 subs. i need an amp for them and i don't want to spend 100's of dollars on one if i don't really need to. i do want one that is going to sound good though. but i dont need it to be the best system in town..lol Is it true you get what you pay for?
information about the 2 subs..

Technical Specification
* Sensitivity: 90 dB
* RMS Power Range : 50-400 Watts
* Peak Power Handling: 1200 Watts
* Impedance: 4 Ohm
* Low Frequency response: 25 Hz
* High Frequency Response: 800 Hz
* Diameter: 12 Inch

Features
Stainless steel-coated polypropylene cone
High excursion rubber surround
Super linear spider
Double stacked magnet
Long stroke design
Sealed box volume: 1.25 cu. ft.
Ported box volume: 1.5 cu. ft.
Mounting depth: 6-11/16"

2007-03-07 06:55:58 · 2 answers · asked by Italian Princess 1

I have a replacement radio that is only a couple of years old.

AM reception is fine, but on any FM station, I get the same sound sounds like the same radio station that is not quite tuned to the proper frequency, i.e. static-y.

Is this repairable, or must i buy yet another radio.

2007-03-07 06:08:37 · 3 answers · asked by chieromancer 6

I have heard the h2 has a lot of problems but i will only give them 1000 watts each at 2 ohms

2007-03-07 04:45:08 · 2 answers · asked by gt 370 1

I am looking to get Diamond Audio or MTX two 12's and not sure what one's are better? the guy that told me he can get me to 12's a amp and box and all the wires and put it in for 900.. i got a s-10 blazer. and want to know what will hit harder DA or MTX

2007-03-07 02:32:59 · 8 answers · asked by blazer extreme 1

Is there a huge advantage to having 5volt over 2volt preamp output voltages?

2007-03-07 02:31:25 · 1 answers · asked by Life Is Illusive 3

2007-03-07 00:46:02 · 5 answers · asked by bu2je 2

2007-03-06 21:42:50 · 2 answers · asked by jolin3762003 1

Does anyone know what size speakers does a 2000 BMW 323ci gets?

2007-03-06 19:10:25 · 2 answers · asked by roo 1

I have a 85 chevy c10 truck and want to add a cd player to it but i dont want to cut out the dash where the original stereo goes. Is there a way I can add the cd player to the truck without cutting up anything? I was thinking a bracket something like a cb radio or something....... Any ideas would be appreciated.... Thanks

2007-03-06 18:21:57 · 11 answers · asked by mtsosie78 2

when i put a cd in my model rfx8115 radio it sends it back out and reads a code e20

2007-03-06 17:47:34 · 3 answers · asked by stacey m 1

2007-03-06 17:12:12 · 4 answers · asked by Jiba Jaba 1

I want a quick answer because I can't decide myself. Also give a quick reason for your answer.

2007-03-06 16:05:07 · 2 answers · asked by kirr45 1

I don't know if I should buy a computer or build it myself. Yes I know how to build computers. I have never done this before so I was wondering which way you think is better. Keep in mind that I have a Volvo stereo so there is no way of swapping out the stereo to an aftermarket one. I know I want a touchscreen LCD. Does anyone know where I can either buy a small system or the parts for a small computer. I have never done this before so I need to know which way to go is better and why. I was also considering a Solid State Drive as opposed to a hard drive.

2007-03-06 16:02:52 · 6 answers · asked by kirr45 1

I know you probly think this is for subs. But its not, its for 6x9's.
I dont know which one i should get. Here are links to them.
Kicker KS693 KS-Series 05KS693 6" x 9" - rms 90, peak 180.
http://www.sonicelectronix.com/item_3570.html

Alpine SPR-69LP - rms 55, peak 275
http://www.sonicelectronix.com/item_3454.html

Thank you if you could tell me which one you think is better.

2007-03-06 15:43:18 · 7 answers · asked by Levi K 2

The only contact info they have is email, no phone number or address. But it looks like they have been online for awhile and have had many previous customers. Are they legit?

www.autotoys.com

2007-03-06 15:16:10 · 2 answers · asked by Vegas♠Bound 2

i was wondering because i would lie to connnect eight amps to my stero but the problem is that my car have only two spots for two amps

2007-03-06 15:05:36 · 3 answers · asked by frank.g5714@sbcglobal.net 2

i was just wondering what kinda amp everone uses

2007-03-06 13:39:46 · 11 answers · asked by eric e 1

I want to put 2 subs in my custom plexiglass box that im building, i want them to look good inside of the box. The sound quality of the subs isnt what im looking for necissarely but would be nice. My budget is 300$ for both subs anybody no any good deals on ebay that i could get in on or what kind of subs to look for on ebay?

2007-03-06 13:32:06 · 7 answers · asked by Kyle R 1

2007-03-06 13:17:31 · 6 answers · asked by Kyle R 1

any type of wholseale subwoofers would work but audiobahn is what i want!

2007-03-06 13:09:09 · 6 answers · asked by Kyle R 1

will my new 400 watt amp make 300watt subs sound the best they can? or is there anything I can do to make them sound amazing?

2007-03-06 12:10:17 · 5 answers · asked by chris p 2

http://www.bostwick.com/spec/enclosures.asp?gID=%7B516BCB15%2D417E%2D4A35%2DA4AE%2DB2FD5D10FAD1%7D

that is exactly what i have

it doesn't tell me anything about RMS watts or peak watts
i need an amp but i have no freakin clue what to get
all it says is 400 watts ..??


my friend told me the bass would sound a lot better if i got 1000 watt amp so should i get that or just get a 2 channel 400 watt amp??

please help me ......!!

2007-03-06 11:22:34 · 7 answers · asked by Anonymous

my deck is http://www.bestbuy.com/site/olspage.jsp?skuId=7961315&st=sony+gt+510&lp=1&type=product&cp=1&id=1153336299652

my speaker in front are pioneers..http://www.bestbuy.com/site/olspage.jsp?navLevel=5&type=category&navHistory=cat00000%2Bcat03000%2Bcat03064%2Bcat03072&id=cat03078
-those are only in front ( should i get them for rear too?)

Sub i'm lloking at is http://www.circuitcity.com/ssm/Jensen-Dual-12-Subwoofer-Bandpass-System-BP212/sem/rpsm/oid/125071/catOid/-13093/rpem/ccd/productDetail.do

will that sub/amp package work with my speasker and deck?
like right rms and stuff...i'm new at car audio i need al lthe help u can give me


should i get the same rear speakers?
will that sub/amp package wortk with them and the deck?
Are those even good subs?
If not what is a good package for not too much money

2007-03-06 11:10:05 · 4 answers · asked by genius 2

2007-03-06 10:58:59 · 6 answers · asked by David M 1

I am buyin 2 kicker s15l7d4's and a hifonics bxi2006d amp. i am planning on wiring it up so that there is a one ohm load. i know how to do this because i looked a the rockfordfosgate website. what my question is is would it be noticable if lets say i got 2 amps and wired up the subs at a 2 or 4 ohm load. they are goin to be in a pretty big vented box. thanks

2007-03-06 10:41:01 · 2 answers · asked by whitler1234 2