Do It Yourself (DIY) - October 2007

2007-10-10 09:35:57 · 4 answers · asked by jason r 1

Adjusting the chain isn't the problem - it's as high as it will go and there's no slack. I've changed the flapper but that isn't the problem. Do you think it's the fill valve or do I need to adjust the ball. Thanks in advance...it's driving me crazy!

2007-10-10 09:35:27 · 8 answers · asked by Sunny_1_ 3

1. Where can information be found on how to deal with an accidental spillage of paint?
2.Which are the 2 essential mixing instructions to follow when preparing a 2 pack material?
3. What painting defect can result in applying oil varnish on an exterior surface in cold, damp conditions?
4. How can the passers-by can be prottected from the risk of having paint dropping onto them?

2007-10-10 09:33:59 · 1 answers · asked by Anonymous

1. Name first stage in the drying of an emulsion paint
2. On a surface that just been painted state:
-the likely cause on cessing
-3 methods of overcoming the problem

3. State 2 possibly reassons for the loss of gloss soon after gloss paint has been applied to the exterior of a house

2007-10-10 08:53:30 · 1 answers · asked by Anonymous

I have taken up tiles in my kitchen and have been left with an unven concrete floor caused by the grouting under the tiles. I would like to put down laminate tiles and was wondering if there is any thing that can be put down instead of my chisling away all the groting?

2007-10-10 08:47:35 · 5 answers · asked by Anonymous

1.when a roller sleve has been throughly washed and all paint removed, how should it be left to dry.
2. how should new unsed brushes be stored?
3. what is the procedure for removing dried water carried coastings from a synthetic filament brush
4. state the type of surface an etch primer is most likely to be used on, and the reason for using this type of product?

a big ty to anyone that helps me out,

2007-10-10 08:44:50 · 3 answers · asked by Anonymous

i am painting a door. i painted it in semi gloss paint but think i would like it in gloss.the paint is very similar in colour to the wall paint which is semi-gloss but i thought the contrast in texture would be better and it would be a lot less work than priming it first.

2007-10-10 08:09:34 · 6 answers · asked by specialnana 1

2007-10-10 07:31:58 · 10 answers · asked by TERRY H 1

1. Why do brushes with synthetic filling can be better suited to the application of some water-based coatings?
2. State the type of surface an etch primer is most likely to be used on, and the reason for using this product .
3. Name the first stage in the drying of an emulsion paint
4. you are painting in a building, why would u attempt to stop significant paint fumes traveling thought the building? and how cau do this?

id be extremely greatful if someone skilled enough could help me out, thanks loads.

2007-10-10 07:18:38 · 2 answers · asked by Anonymous

1. a painter has been given responsibility for taking delivery of a ... large consigment of paint. state 2 actios that should be taken to maximise the security.

2. also what is the name of the solvent that should be used to wash knotting from a paint brush?

2007-10-10 07:15:33 · 3 answers · asked by Anonymous

2007-10-10 06:01:41 · 12 answers · asked by oneakmusic 2

name 2 situations where it is beneficial to use an electric heat gun to remove paint.

also ..

why is it important to consult manufacturers instructions when preparing surfaces to receive a paint you have not used before?!

ty 4 any help

2007-10-10 04:46:02 · 4 answers · asked by Anonymous

2007-10-10 04:43:04 · 3 answers · asked by Jim B 1

state the precautions to take when washing down surface using water

2007-10-10 04:42:15 · 3 answers · asked by Anonymous

We want to paint our garage door this weekend. It's supposed to be around 60 to 63 degrees, 10% chance of rain but damp. Will it be okay to paint?

Also, I'm thinking we need to prime it first. Do we need to sand it before priming?

Lastly, should we use semi-gloss paint?

2007-10-10 04:28:31 · 6 answers · asked by GeminiVirgo1971 5

I have a combi boiler and no water tanks in my house. The water is direct from the mains. What kind of shower should I choose to install?

2007-10-10 04:17:29 · 12 answers · asked by PetLover 4

Is there any difference between the old black coaxial cable and the new white coaxial cable they use now. I want to run cable out to the garage and the neighbor has a spool of black wire but I also want to hook up internet and they usually install the white coaxial these days and don't want to run the black coaxial if it isn't going to work the best for internet applications. Are they differenet grades of wire? What should I be looking for to run internet? Or will the black coaxial be fine?

2007-10-10 03:38:30 · 6 answers · asked by snwbrdr960 3

or is permission needed

2007-10-10 03:26:09 · 5 answers · asked by Anonymous

2007-10-10 03:24:32 · 7 answers · asked by Anonymous

I have lifting floor tiles from my kitchen floor and have discovered concrete like adhesive on the concrete floor. I want to take this off the floor, is there an easy way to do this?

2007-10-10 03:22:50 · 13 answers · asked by Anonymous

I would like to separate the DE out and water the yard with the rest. There is not currently a connection to the sewer so I have been draining it down the street. Its an in ground 12,000gal pool with skimmer and bottom drain and large DE filter

2007-10-10 03:18:34 · 3 answers · asked by Ken D 1

We have an existing fireplace insert brass-framed glass doors and we want to replace it with a silver-framed fireplace glass doors. Is that hard to do? I have no idea how to uninstall our existing insert, if you have tips, let me know.

2007-10-10 02:48:59 · 3 answers · asked by hello 6

Hello, does anyone know what the best soil type is to build a bungalow on and what type of foundation would you recommend?

2007-10-10 02:42:30 · 4 answers · asked by Anonymous

My outdoor table and chair set was given to me about 2-3 years ago and the cushions were previously painted bright blue with some kind of weather-resistance paint. The paint is starting to wear off, but the cushions are still in very good condition. I want to re-paint the cushions, but don't know what product was used before. The lady that painted them before has since passed away, so I can't ask her. I have looked at craft stores, but haven't found any fabric paint that is specifically weather-resistant. Any ideas? Thanks for your help.

2007-10-10 02:41:12 · 3 answers · asked by Pattilou 1

2007-10-10 02:25:55 · 3 answers · asked by Chad 5

2007-10-10 01:54:32 · 4 answers · asked by joewise22 1

2007-10-10 01:47:23 · 4 answers · asked by Joe 1

i have a project, which is to automate the process of making a candle. i need to have a custom made mold for the candles. what material , like, what should be the made of my mold, say should it be aluminum or something... i need a material that can heat easily and cool out easily as well. what material should i have my mold to be made of.

2007-10-10 01:26:31 · 3 answers · asked by joan the great 3

2007-10-10 00:08:49 · 4 answers · asked by demerchantconnie43 2

Fun ways to Clean my room!! i need some motivation, or just give me some advice to motivate me, games i can sorta do to clean it.. yeah i just need to get up and clean it any fun things? OH how about sweet ways to decorate it and all that awesome stuff ( somethin to suit my age (17) yeah..) HELP!!! I NEED IT! ASAP!

2007-10-09 23:49:58 · 3 answers · asked by Elisabeth R 3