Monitors

2007-10-23 06:20:49 · 4 answers · asked by Gayaneh K 1

2007-10-23 01:35:25 · 1 answers · asked by Anonymous

Hi,
I just bought a 2-port KVM Switch. Model: DD 202. The problem I`m having is: One of my computers is Windows XP and the other is Vista. When I set it up, the mouse and keyboard will only work with the XP computer. When I press the button, I can then switch to Vista mode. It is all there on the screen, except the mouse and keyboard don`t work. The System requirements reads: DOS; Windows3.X/95/98/9SE/2000/ME/XP/NT;Netware;Unix;Linux.
My wife says this may not be compatible with Vista, probably because it was made before Vista was introduced. But when I press the button, there I have Windows Vista on my screen. If it was`nt compatible, would it just not work at all, or would there be a message appearing on screen saying that it does not meet the requirements?
I am pretty sure that it does work and that I am just doing something wrong. The user manual is very basic, with the instructions consisting of just 4 lines.
Could anyone please give me some advice?
Thanks.
Tony.

2007-10-23 00:09:10 · 1 answers · asked by Anonymous

What are the benefits of DVI over VGA? Please provide sources if possible. Thank you

2007-10-22 13:29:09 · 4 answers · asked by myname_isalbert 1

i have the 8 monitors and the equipment to set this up.. but how should i do it? I want to make it linear or 4 on top of 4.

should i choose this?

Monitor = O

OOOO
OOOO

or this?

OOOOOOOO

thanks!

2007-10-22 05:41:42 · 6 answers · asked by Anonymous

like if i stand or go further away the image will look stretched and just distorted it's kinda weird... is this common with a lcd screen?

2007-10-22 05:11:01 · 3 answers · asked by Anonymous

What can you suggest with my problem?? My monitor flickers permanently just like it does when you choose "Degauss" in the menu. What can you suggest?? (Its an AOC "17" inch monitor non - LCD type)

2007-10-22 02:38:44 · 5 answers · asked by Alvin Jose G 2

i wll be getting a

22 inch samsung monitor for my 360

a dynex hdmi to dvi cable

and isignia speakers

i was wondering is this the way i would set it up

connect the big end of the hdmi to dvi cable to the 360 the smaller end to the monitor. then connect the speakers to the monitor. is that how it will work will i need to connect my speakers to my 360 also or just the monitor and since im getting the extra speakers will the speakers pick up the sound of the hdmi to dvi cable

2007-10-21 15:45:50 · 1 answers · asked by hgbored 1

I try to move the tab bar but I wont move. My screen and everything is to bug. it needs to be smaller.

2007-10-21 07:17:59 · 3 answers · asked by Anonymous

This problem has occurred simultaneously with another problem - the laptop is suddenly unable to read cd's although it can read dvd's. Any suggestions anyone?

2007-10-21 06:11:06 · 2 answers · asked by Romeobc2 1

2007-10-21 03:31:05 · 3 answers · asked by Pothen T 1

2007-10-20 14:53:52 · 16 answers · asked by Anonymous

Everything is upside down on my screen....what the (insert expletive) have i done???? xxx

2007-10-20 09:25:19 · 7 answers · asked by Anonymous

i have tried all the usuall stuff like altering resolution, updating drivers ect.

it has been fixing its self if i changed the resolution down to 1280 x 960 then back again too 1280 x 1024.

2007-10-20 09:12:12 · 2 answers · asked by bennymole316 4

I spilt a bit of tea on my keyboard the other day, and for about a day or so the buttons still worked fine, but now some of the buttons that got wet are not working, and one of them feels like it's jammed. Is it messed up permanently, or will it start working again after it's dried out?

2007-10-20 08:57:21 · 4 answers · asked by DMD3 2

2007-10-20 04:30:09 · 4 answers · asked by Anonymous

Whenever there is a vibration nearby or I touch my monitor, the screen will fold in on itself, or becomes scrunched in either the top or bottom half. It stays like this until I move the cables around behind it, and then it starts up again in a minute or so. Is this permanently fixable?

2007-10-19 13:06:55 · 1 answers · asked by Anon 2

I have a PC that has a GeForce 7950GT video card installed. It has support for 2 monitors. I just added a second monitor and used the NVidia Control Panel to set it up.

It set it up as spanned horizontally, but I do not want this. What I really want to do is use my primary monitor the way is is now (displaying the full task bar and desktop, etc.) and use the second monitor as basically a place to store things (IM, email, temperatures, etc.) so that I can still view them when I have a full screen application running on my primary monitor.

I do not want the display to be spanned across both monitors...if that happens, only half of full screen apps appear on each monitor and I don't have the second monitor right beside the primary.

Can I achieve this through the NVidia Control Panel, or do I need to configure it another way?

2007-10-19 10:12:59 · 1 answers · asked by Yoi_55 7

i just had to buy a new monitor becauste the older one just gone black, my question is if i must turn it off before turning off the voltage regulator or it doesn't mind if i leave it on and turn it off while turning off the regulator what gives my crt monitor a better care?

2007-10-19 08:15:01 · 6 answers · asked by Gaby 2

I have an HP lcd monitor with the soft screen - the instructions say to clean with a damp cloth - but I have two kids and two godchildren who use this computer and I'm needing something a little stronger than plain water. What is safe to use on these soft plastic screens?

2007-10-19 06:31:15 · 7 answers · asked by kal2448 1

I have a LAPTOP at work that can do that (DELL Latitude D800). But I am looking for a flat screen being able to display 1900x1200 native resolution that is not 24 inches and over. Is this a marketing decision from the companies?

2007-10-19 05:18:05 · 4 answers · asked by Anonymous

I have a new graphics card:Nvidia GeForce 8500 GT.Can I run a S-video cable from the back of my graphics card to the front inputs to my TV and use it as a monitor?Do you have any tips or advise on hooking it up?Thanks-I'm learning.

2007-10-19 03:20:40 · 6 answers · asked by TomatoMug 3

I get headaches when I read on a computer. If I read a book I have no problem. Will installing a glare filter on my monitor solve this problem? If not what will?

2007-10-19 02:16:59 · 2 answers · asked by wygot 1

2007-10-19 02:09:05 · 4 answers · asked by ELISHA W 1

Hasn't been used for a few months and now the screen display is really dar - can hardly be seen. I've tried adjusting the sttings but this doesn't work. Any ideas as to what it could be & how to fix it?

It's never been used online or connected to other devices, so can't be a virus problem....

2007-10-19 01:54:26 · 2 answers · asked by indie_girl79 3

2007-10-18 16:50:57 · 2 answers · asked by Jah 1

I just restarted my computer everything is messed up. I went to display and the screen resolution is 800x600 and 4 bit color, it won't let me adjust it so I dont know what to do.

I have windows xp by the way, incase that matters if you know what could be the problem.

2007-10-18 13:57:30 · 3 answers · asked by ~♥~ 3

hi everyone! my monitor is acting weird! it's an AOC 17" monitor. actually, i can't explain to you guys, but, here's a link, take a look:


my monitor displays from this:
http://i65.photobucket.com/albums/h218/markalaiza3/Image239.jpg

to these!! :

http://i65.photobucket.com/albums/h218/markalaiza3/Image238.jpg

http://i65.photobucket.com/albums/h218/markalaiza3/Image237.jpg

http://i65.photobucket.com/albums/h218/markalaiza3/Image236.jpg

pleasse!! help me!! i don't know what's going on! tnx guys!!

2007-10-18 13:25:07 · 5 answers · asked by Anonymous

2007-10-18 12:52:12 · 3 answers · asked by lucky@sbcglobal.net 1

I have a 19" LCD Monitor, this one...

http://www.futureshop.ca/catalog/proddetail.asp?sku_id=0665000FS10089660&catid=22334&logon=&langid=EN

My video card is the ATI Radeon X1650 PRO 512MB AGP...

On the box it says that these are the external connections...

5-pin D-Shell (female) VGA output
DVI-I Output

TV-Out with S-Video Connector (TV-Out Version)
VIVO with S-Video Connector
HDTV Display Support

Anyways, in the box is a coord that could go into the classical keyboard/mouse slot, not the usb one, the one with like 7 pins. The wire then leads to 3 colored wires with holes in them, that my Wii yellow, red and white coords could fit into.

Not sure what all this mess is, but is it possible to hook my Wii up to my LCD Monitor?

2007-10-18 12:24:58 · 2 answers · asked by Anonymous