Chevrolet

I've got a 1987 Monte Carlo SS. I replaced the power steering pump due to a leak. The original pump had a double pulley and double belt set up. The replacement only came with a single pulley. I installed it with the single pulley and belt and the power steering doesn't work so well anymore. I know that I need to get a double pulley, but I can't find one. Anyone got any suggestions?

2007-03-07 07:09:32 · 2 answers · asked by iceman30906 4

If this is possible, what all is involved in doing this and will it give me better power and/or fuel economy? Does anyone sell a kit to do the change over?

2007-03-07 04:40:46 · 3 answers · asked by tinman 1

i assume it is going to leak, so when i add another can should i put in the one wth the oil or one with stop leak, or just plain refrigerant? someone said the stop leak stuff was bad. thanks for any advice.

2007-03-07 04:36:00 · 6 answers · asked by expertless 5

I just bought a used 05 trailblazer and it didnt come with keyless entry... does it already have it in the car, and can i just buy a remote off ebay or something or do i have to get something installed? I had it in my old car, so it is wierd not having it now!!! Thanks in advance :)

2007-03-07 03:52:11 · 4 answers · asked by Pregggers2 2

I have a 76 Corvette, and on the body there is a key hole where the stingray emblem is, which is right above the driver side front tire. I noticed it and wondered what it was for. Design or something else. Any crazy help would be cool.

2007-03-07 01:47:43 · 6 answers · asked by Immortal Myth 1

my car has a problem with the starter and they say its the starter gear. but i think the junk yard might have a car that has a starter like new one of the cars that i could but in my car. so i need to know what starter will fit in a 1999 chevy calivier

2007-03-06 23:38:02 · 2 answers · asked by Anonymous

2007-03-06 21:20:17 · 4 answers · asked by kruzen54 1

I sold my firebird, but I still have the crankshaft that came from the motor. The crankshaft is from my 68 Pontiac Firebird 400 motor, my motor ran super strong when it was in my firebird and I want that kind of power from my 69 Chevy Impala SBC 350. I am planning on an engine rebuild for my 350 within the next month or so and I want more power from my motor, I realized that I still had my crank from my Pontiac 400. I am guessing that this would add instant power as the crank is bigger, but Im not sure if this will work. Besides, I would have no use for the crank if I didnt ask to see if this would work first. Any suggestions or help would be appreciated. My 69 convertible Impala is pretty heavy, so I want a strong, more powerful, and more stout 350 upon rebuilding.

2007-03-06 20:06:16 · 7 answers · asked by Just Me 1

I posted the Question about the Knocking sounds, and just need to know how the adjust the Timing on the LS1. I know that their are Coil-Packs that create the Spark. I would like to know how to adjust the Timing. Please let me know! Thank You!!

2007-03-06 18:42:24 · 7 answers · asked by Diog 3

I have a 2000 Camaro Z28 with an LS1 350 V8 in it. It makes knocking Nioses, like a Diesle Engine. I have heard Lots of LS1 V8's, and have heard the SAME Engine Nioses. Is the LS1 Supposed to do that?? And What is Making this Niose?!?
An Intelligent Answer is Appriciated!!

2007-03-06 17:13:27 · 12 answers · asked by Diog 3

I have seen some of the generic "keyless entry intructions" on line, but nothing seems to work. My 2004 Tahoe came with a keyless entry, but I can not get it to work since the battery went dead. Does anyone know how to reprogram the remotes or a new remote? Thanks for your help!

Mike

2007-03-06 15:12:52 · 6 answers · asked by mike_mascera2001 1

It is pewter. I do not want comparisons. I want to know if y'all think it looks good or bad. one word answers only. either yes or no

2007-03-06 14:24:24 · 17 answers · asked by shiznizzal24 2

2007-03-06 13:31:47 · 14 answers · asked by Anonymous

lately my truck just clicks when I try to start it. this goes on for a little while then it finally engages and starts. I have replaced both cables and that worked real good till the next day and then the clicking started over again not as bad , any suggestions?

2007-03-06 12:54:47 · 12 answers · asked by brad w 1

2007-03-06 12:31:55 · 12 answers · asked by tiqueman2003 1

2007-03-06 11:55:48 · 5 answers · asked by Black Belt 1

Contrary to public opinion...

1. There is NO such thing as a zero-pollution car. To charge batteries, you must make electricity...which comes from a fossil-fuel belching
powerplant...hence pollution. Solar grids and batteries are extremely toxic to manufacture.

2. You cannot mfg a single item, not even a toothpick without producing pollution.

3. Be it ethanol, electron's, oil, or hydrogen, etc, don't be in a rush for this "alternative energy". Oil was once a nusance...then they found a use for it....and there goes the price! The same thing is happening to the price of corn...or "cheap electricity" Once something goes mainline, the price is going to be control by monopolies(just like today)

Electric car? We need to decrease the world population, that's the business at hand.

2007-03-06 10:36:05 · 10 answers · asked by Anonymous

I just wanna know if it could work. if not, are there any other engine swaps i could do with this car?

2007-03-06 10:25:32 · 10 answers · asked by Anonymous

2003 Singlecab

2007-03-06 08:58:01 · 12 answers · asked by arsehole_adam 3

Sometimes when I turn the key over it just makes a winding sound. So I have to let off and turn it again and it will finally turn the engine over and start. Anybody know?

2007-03-06 06:10:50 · 8 answers · asked by thugshady06 2

I have a 2005 Impala. The speedometer has been flucuating for a couple of months now. This morning the temp gauge went all the way to hot. But the car was not hot. Could these be linked?

2007-03-06 03:55:11 · 5 answers · asked by Tina R 1

2007-03-06 03:45:46 · 4 answers · asked by LARRY R 1

I just put a 350 91caprice engine in a 91 rs camaro but the camaro had no computer,so I made it a carburated engine and it worked but i dont know if the trensmision will work without the computer

2007-03-06 03:25:05 · 3 answers · asked by alacran 1

I have a 1998 Camaro with a v6 3.8 5 speed stick, was woundering if it's possible to replace it with a v8 z28 model? If so where would I start this car engine replacment adventure??

2007-03-05 20:33:36 · 4 answers · asked by jack l 1

I put a new battery in there started every day for about a month
Then i tried to start it there was nothing. I brought it to a shop they put on a new starter. Went to pick it up no problems next day same thing. Brought back down to the shop a new starter relay started right up a month later same thing. I had to jump it the battery was reading normal untill i gave it gas then it was at 18. the amp light is on. I opened the door the engine reved higher. Let it ran for an hour got out closed the door with it still running the truck shut off tried to start back up nothing no lights. Put the jumper cables back on turned the key started right up put in reverse stalled. im thinking voltage regulater or the diode in the alternator or maybe a short in the wires maybe all three

2007-03-05 18:16:54 · 8 answers · asked by Anonymous

On a Chevrolet truck with a V8...

One valve cover has a PVC valve and the other a push-in breather. Would it hurt to put a second PVC valve in so I have one on each side and run 3/8 hose to a T fitting then to the carburator? Good/Bad/Wouldn't hurt?

2007-03-05 16:55:44 · 3 answers · asked by doyou 2

2007-03-05 15:14:42 · 3 answers · asked by diggerdave 1

Clutch feels spongy when pushed in. And when letting clutch out it
engages about 1 inch off floor. Fluid is full. Master cylinder not leaking. Some fluid on trans and bellhousing. Slave cylinder leaking? Clutch plate bad? Please help.

2007-03-05 13:31:53 · 2 answers · asked by william h 1

....on where i could find a listing for gas mileage and specs on a 1991 chevy truck 1500 with a 305 v8?

any helpful links would be greatley appreciated...thanx

2007-03-05 12:42:43 · 4 answers · asked by Anonymous

the guage acts very stange when it gets below half empty. it causes the overhead display to be very erratic

2007-03-05 11:46:52 · 4 answers · asked by george s 1