Chevrolet

2007-03-12 04:46:00 · 4 answers · asked by ronald n 1

I have a '98 Chevy 1500 with a 350 and AT. How much would it cost to convert it to a manual transmission?

2007-03-12 04:19:11 · 5 answers · asked by Anonymous

Will it work in a s-10? Years?

2007-03-12 03:25:36 · 5 answers · asked by john t 1

I am mad as all get out. GM has decided to stop making the Monte Carlo. I have a 2007 SS with the rear wheel drive. I buy a new one yearly. I love these cars. Sometimes I would love to kick this company. If I wanted an Impala I would buy one, but I don't like it. If I wanted a little Malibu I would get one of those, too small. How is it they make a car that anyone can fit into then stop making them for these tiny little cars? Do they think that all people are 5'5? I am 5'11 and I need leg room. These little cars just don't work for me. Honestly, I wish GM would just close their doors. I am thinking they are just stupid. They make some of the dumbest and biggest mistakes. Like CEO's getting million dollar bonuses while the company is in trouble. They are talking of bringing back the El Camino. Eww! Whats up with that? Anyone think they will bring back the Monte like the Camero? Or will it take GM loosing more customers over it or will customers compaining enough to bring it back?

2007-03-11 22:12:20 · 6 answers · asked by misstigeress 4

the battery is fully charged, all the lights turn on.

2007-03-11 19:52:17 · 6 answers · asked by steve55792 1

i have a 383 stroker and i am wondering if two 650 four barell holley carbs on a tunnel ram is to much gas for my small block and also i want to know if there is a kit that can lower my CFM's ?

2007-03-11 18:45:18 · 9 answers · asked by tatiana408 1

i got a 54 chevy bel air and im trying to find original interior.. but i cant find tan leather interior for a bench seat there all for bucket seats ..,. im making my own in cloth but i want to retro it out a little bit.. please help thanks

2007-03-11 18:41:15 · 2 answers · asked by Adam54 1

Just recently and it has gotten worse when I go to start my car it makes a loud schreeching noise, not a clicking that you normall would get from a starter. It takes several times of turning it over and just the right touch to get it started. Sometimes it helps if I slowly hit the gas pedal as I'm starting it but I'm worried one day it wont start and the noise is so embrassing when I try to start my car! What is wrong?? Starter? fuel filter? I'm not exactly car savvy! Is it going to be expensive?? Please help!! I have called around for prices of having a new starter installed and everyone says 350 bucks! Is there a cheaper way? No one seems to have rebuilt ones in my town. Could I install it? Where can I get directions?

2007-03-11 18:32:53 · 4 answers · asked by Anonymous

Here's the list of symptoms:

My daytime running lights wont switch over.
My tail lights wont turn on.
My head light selector on the column does nothing.
The fog light switch does nothing.
The dimmer for the interior lights does nothing.
My instrument cluster has no lighting.
My A/C and Heater knobs doesnt light up.
Service Vehicle Soon light is on.

I already replaced the multi function switch in the column and it didn't fix anything.

Only thing I've really done to the car is add on my aftermarket CD player.

Any ideas of where to start?

I've kind of ruled out fuses since so many things quite working at once and as far as I can see, none of them are on the same relay.

Thanks in advance!

2007-03-11 16:40:03 · 2 answers · asked by damion_2002 1

i have a 96 monte carlo z34. when i drive down the road the rpms flutter 100 to 200 rpms. its not very noticably feeling wise but i can notice it just because i look at my gage. it will also start really shitty sometimes if i shut it off and start it up within a small amount of time and when i push on the gas it acts like it doesnt want to go and makes a terrible noise after a couple minutes it evens out and drives fine. thats only if i start it after a short amount of time of it being turned off. its fine if sits for a while. i changed my fuell filter and it ran good for two days and started acting up again.

2007-03-11 16:27:01 · 4 answers · asked by sunshine24 2

all of a sudden it want start no more all it will do is click we checked the battery its good , check the alternator its good , what else do we need to check. thank you

2007-03-11 15:58:52 · 6 answers · asked by louann 1

Anyone know where i can rent a 2007 impala

2007-03-11 15:57:30 · 4 answers · asked by arp2007 3

2007-03-11 15:47:34 · 4 answers · asked by robert k 1

My 1-2nd gear shift is firm but I get a long slippage going into 3rd that really eats power. If I press harder on the gas it sometimes gets worse then will jerk & cause my rpms to bounce around. does anyone else tranny does this or is it something ALL 200r4's do?

2007-03-11 15:34:57 · 6 answers · asked by Willis C 3

can any one tell me how i would wire the lockout switch on a 700r4 trans it was in a 91 camaro and now it is in a carb 350 how do i wire the lockout with out the computer the trans will not shift out of first without the switch hooked up can any one help me

2007-03-11 15:08:54 · 4 answers · asked by slpandsfp 2

1995 cavalier i bought it used and i need an owners manual so if u can help it would be great

2007-03-11 14:50:48 · 6 answers · asked by chevy man 2

its a v6 and do any of ya'll have any ideas how to make it fast i want to get myself a new engine but idnk if thats too expensive well if y'all have any ideas help me out

2007-03-11 14:02:02 · 5 answers · asked by Anonymous

2007-03-11 12:13:59 · 6 answers · asked by joe 2

Do you have to remove the inside fender well to get at the studs to remove the heater core housing on a 1969 chevy pickup 2wd??

2007-03-11 11:35:04 · 2 answers · asked by Anonymous

I'm probably going to have my car towed to have it fixed. How much does a tow normally cost that is only about a mile and it is just a chevy cavalier? This a rural area not a large city if that has anything to do with the price.

2007-03-11 10:21:11 · 23 answers · asked by Lily 2

2007-03-11 09:25:48 · 5 answers · asked by Depebush 1

2007-03-11 09:00:58 · 4 answers · asked by Depebush 1

I really just need to know how to flush out the old anti-freeze, I alreaddy know how to fill it.

2007-03-11 07:48:40 · 6 answers · asked by W.R.C. S 1

I read something about this, but i forget what it was. It said that way back when, like in the sixties or sometime, GM had sold the blueprints of one of their engines to Dodge, so they could make the same engine. What engine was it?

2007-03-11 07:19:24 · 10 answers · asked by Halls of Colours 2

i have a 1991 camaro and have no ignition key for it and its one of those passkeys and i would like to know how much it would be for a key to be made for me

2007-03-11 06:06:00 · 2 answers · asked by Anonymous

well a 275/25/24 tires fit on a monte carlo ss 1986

2007-03-11 05:18:24 · 8 answers · asked by sean b 1

PROBLEM IS OVER HEATING. I HAVE CHANGED T-STAT AND FLUSHED SYSTEM TWICE. CHANGED HOSES AND LOCATED RESTRICTIONS IN BLEEDER LINES AND CORRECTED. STILL HAVING PROBLEM. ALSO TAPPING IS COMING FROM INTAKE AREA BUT NOT ALL THE TIME. MAKES ME THINK AIR ON SYSTEM . I HOPE SOMEONE CAN HELP ME WITH THIS ONE. THANKS IN ADVANCE.

2007-03-11 03:22:31 · 3 answers · asked by William G 1

Reason why i ask, my 1988 Chevy Silverado TBI 305 5.0 V8 "SOMETIMES" hesitates and or will shut off- after a stop or even while at freeway speeds. it STARTS right back up- without a problem.

I just spent $127.53 For a OBD1 diagnosis- Nothing found everthing is in order-PER Mechanic...But found a "clogged Fuel Filter". trouble seemed fixed until the next morning...
If i let off the accelerator, and "pump" it a couple times it seems to clear right up and drive strong.

I will get a second OBD 1 Diagnosis at a different Repair shop and see if he can find my Truck trouble.

If anyone out here has an idea or a opinion please tell me everthing i might check or do!

Complete tune-up 4 months ago, never had any trouble, NO leaks, This trouble just started last week...
Cat Converter has a broken weld/leak- nothing further "enitire Truck"

Thanks folks,

"/JOe

2007-03-10 18:41:06 · 9 answers · asked by "/ J()€ 5

2007-03-10 17:37:02 · 21 answers · asked by Anonymous

2007-03-10 17:22:37 · 10 answers · asked by laurie 2