Chevrolet

ford has the A, Z, and X plan. what is the name of the chevy plan?

2007-03-15 02:28:39 · 1 answers · asked by ? 3

and if a starter goes bad can it make anything else go wrong. my dad is a mechanic and he doesnt wanna here what i have to ask cuz he works on cars all day for 20 years haha. but im geting a 96 camaro for 100 great cond.

2007-03-15 01:30:56 · 3 answers · asked by Anonymous

she says the starter maybe goin on it and i think its a v8 i havent seen it yet. she said its got chevy duals and its red but its a automatic. no dents or anythin but u no how people say that well she her dad wants 100 dollars sound good to yall??

2007-03-15 01:22:03 · 6 answers · asked by Anonymous

2007-03-15 01:01:56 · 6 answers · asked by John A 1

I bought a chevy 350 motor and I put a 60 over bore on it can anyone tell me what its now cloassified as? I'm trying to make it a 350 stroker, and if thats not the way to do it. Then what does it take?

2007-03-15 01:01:27 · 5 answers · asked by Anonymous

All i know is that it is a V6, i thought it was a chevy but i dont think it is, i have found this number on the engine - 14803987
Can anyone help?

2007-03-15 00:01:10 · 8 answers · asked by Anonymous

2007-03-14 23:28:26 · 4 answers · asked by howard s 2

2007-03-14 21:52:10 · 6 answers · asked by Anonymous

I have a 350 in my truck and it is set up really good. After-market timming, cam, crank, heads.... The whole nine. The guy I bought it from bored it +60, which is as far as you can go on a SBC. It droped a piston ring and scratched the cylinder. I don't really want to try and strip the entire motor and start from a fresh block. The motor was just assembled last year and all the parts are like new. I bought it as-is so he can't do anything. I would really just like to get this motor going till I save the money to build up another one. I have looked everywere and can't find sleeves. Help!!!!

2007-03-14 20:27:42 · 6 answers · asked by Steve-o 1

all the lights work and the radio works fine but i can't get it to start. there's a clicking under the hood but it won;t turn over

2007-03-14 20:01:54 · 9 answers · asked by michael w 1

I test drove a 2001 Chevy S-10 today. I forgot to ask if it is 4-cylinder or 6-cylinder. Do you know? When I drove it and hit the accelerator hard it seemed sluggish. Maybe because it was 4-cylinder? When I applied regular, smooth acceleration from a stop everything was good. Do you know the horsepower? Anything else you can say would be great. Thanks!

2007-03-14 18:44:56 · 3 answers · asked by gpaltrow2001 2

my fellow american help me with this stupidity,,why GM built one truck ,but give it two names.i'm talking about -GMC and SILVERADO truck.-YUKON and TAIHO

2007-03-14 18:22:52 · 10 answers · asked by widner a 1

a week a go got a ticket for head lights to high off the ground. legal hight is 48" mine measured 54". is there any kits out there to lower my head lamp assemably, ( and not my truck )?

'03 chevy 2500 4 door

2007-03-14 17:31:38 · 1 answers · asked by Anonymous

hell i have a chevy 350 4 bolt main and i need to rebuild it but i need info on what to have done at the machine shop and what to tell them i want done to the block its not a roller block,i want to run a nice size cam in the motor i have the world chevy s/r torquer iron heads but any info on this rebuild would be helpful and if anyone know a price on average for machine work

2007-03-14 17:17:52 · 2 answers · asked by slick 50 1

Someone was telling me about an early 90's chevy truck that is for sale, they described it as a black 305 SS chevy shortbed. I know they made a 454 SS, but have not heard of a 305 SS. Anyone else heard of one?

2007-03-14 17:06:36 · 10 answers · asked by green-machine 1

I have a 2002 Chevy Cavalier, and recently decided i want to make some modifications to it. is there a general rule for a starting point? how much should i be willing to spend for rims, tires, body kit, and a new paint job?

2007-03-14 15:48:34 · 5 answers · asked by Anonymous

me and my buddy are going to do this, since hes got a 305 and the a/c dosent work. plus all the smog stuff, can all of this be removed and the truck still run (only because its an 86).

2007-03-14 15:47:19 · 5 answers · asked by wheels47012 3

It has a 3.8L and I am looking to make it faster than it already is. Any suggestions would be really appreciated.

2007-03-14 14:03:46 · 8 answers · asked by marylou6996 3

why in the heck do i have such bad luck with accell distributors for my small block chevy. i keep burnin out modules mostly. should i go mallory? if i have to keep droppin in my old gm hei distributor just to get home i think im gonna go points. but will i get the same extreme advance in timing with just a regular distributor and seperate coil? i love the fact on hei i can change the syntripical force springs out under the rotor to lighter springs for more advance. does the old system of a seperate coil and points offer this feature?

2007-03-14 12:17:08 · 1 answers · asked by mike m 2

I had a mouse chew the wires that go to the fuel injection, the dealed found it during inspection and tried to sell me a new harness for1500 bucks, the damage is close to the plug socket ,,can these plugs ( that are on the injector) be taken apart and new wires soldered on ?? is their a place that just sell the plug sockets that i cab just change that section of wire ??

2007-03-14 11:37:15 · 6 answers · asked by John b 2

What spark plug wires goto which coils 1/3 2/5 4/6 ?

2007-03-14 10:37:44 · 2 answers · asked by littermenot 1

when timing gear marks aligned does # 1 cylinder need to be building compression or is that just to put #1 at tdc
my 350 marks are aligned on timing gears but compression builds at anothewr180 degrees help

2007-03-14 10:33:42 · 6 answers · asked by Anonymous

Any tricks to removing the bell housing bolts on a 95 S10 blazer? We have pulled everthing down to the block with the exception of the valve covers (and of course the heads).

Any help would be appreciated!

2007-03-14 10:01:34 · 9 answers · asked by John T 1

I changed the plugs and wires and ran a couple of bottles of injector cleaner through it (out of desperation), and still no luck.

Anyone have any ideas?

2007-03-14 07:48:34 · 5 answers · asked by J K 1

I HAVE BEEN FISHING TO FIND OUT IF THERE IS A SWINGING OUTSIDE REAR SPARE TIRE MOUNT FOR 92-99 CHEVROLET BLAZER/TAHOE MODELS AND I CANT SEEM TO FIND ANY, AND I HAVE SEEN ONE BEFORE BUT I DONT KNOW IF IT WAS CUSTOM OR NOT. DOES ANY BODY KNOW WHERE I CAN FIND ONE?

2007-03-14 06:31:08 · 2 answers · asked by SUPADAVE25 3

I'm trying to buy my fiance as a suprise some HID headlights for his Chevrolet Tahoe. Can you guys give some pointers on which type (brands etc...) would be the best to buy and where to buy? Price is not an issue.....thanks!

2007-03-14 06:28:18 · 1 answers · asked by M 3

Is all that is to a stroker motor is a 350 bored .030 over with a 400 SB crank, flex plate and harmonic balancer?

2007-03-14 05:51:18 · 7 answers · asked by wheels47012 3

2007-03-14 03:59:47 · 5 answers · asked by silky d 1

does anyone know where i can find plans for an engine stand and other metal projects. doesnt matter if it is sheet metal or thick stuff aluminum or steel.

2007-03-14 03:39:31 · 3 answers · asked by turkey 6

2007-03-14 02:30:41 · 5 answers · asked by Anonymous